Instruction/ maintenance manual of the product GLC2500L Black & Decker
Go to page of 16
GLC2500L.
2 English (Original instructions) 4.
3 E B A D F C.
4 G H I J K.
5 L N M.
6 Intended use Y our Black & Decker strimmer has been designed for trimming and nishing lawn edges and to cut grass in conned spaces. This tool is intended for consumer use only . Y our Black & Decker charger has been designed for charging Black & Decker batteries of the type supplied with this tool.
7 u Use your Black & Decker charger only to charge the battery in the tool with which it was supplied. Other batteries could burst, causing personal injury and damage.
8 Assembly Warning! Before assembly , remove the battery from the tool. Fitting and removing the battery (g. B) u T o t the battery (14), line it up with the receptacle on the tool. Slide the battery into the receptacle and push until the battery snaps into place.
9 u Charge discharged batteries within 1 week. Battery life will be greatly diminished if stored in a discharged state. Charging indicators If the charger detects a problem with the battery , the charging indicator (16) will ash at a fast rate. Proceed as follows: u Re-insert the battery (14).
10 Maintenance Y our Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Y our charger does not require any maintenance apart from regular cleaning.
11 Y ou can check the location of your nearest authorised repair agent by contacting your local Black & Decker ofce at the address indicated in this manual. Alternatively , a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.
12 Guarantee Black & Decker is condent of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free T rade Area.
13.
14.
15 ENGLISH Do not forget to register your product! www.blackanddecker .co.uk/productregistration Register your product online at www.blackanddecker .co.uk/productregistration or send your name, surname and product code to Black & Decker in your country .
90560493 REV -0 01/2010 Australia Black & Decker (Australia) Pty . Ltd. T el. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker T el. +64 9 259 1 133 5 T e Apunga Place Fax +64 9 259 1 122 Mt Wellington Auckland 1060 United Kingdom Black & Decker T el.
An important point after buying a device Black & Decker GLC2500L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker GLC2500L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker GLC2500L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker GLC2500L you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker GLC2500L will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker GLC2500L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker GLC2500L.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker GLC2500L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker GLC2500L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
