Instruction/ maintenance manual of the product FSM1630-XE Black & Decker
Go to page of 12
Australia New Zealand www. blackanddecker. com.au FSM1630-XE.
2 B A D C F E.
3 H G J I K.
4 ENGLISH (Original instructions) Intended use Y our Black & Decker steam mop has been designed for sanitising and cleaning sealed hardwood, sealed laminate, linoleum, vinyl, ceramic tile, stone and marble oors and for refreshing carpets. This appliance is intended for indoor household use only .
5 ENGLISH (Original instructions) @ W arning! Do not use on unsealed wood or unsealed laminate oors. On surfaces that have been treated with wax or some no wax oors, the sheen may be removed by the heat and steam action. It is always recommended to test an iso- lated area of the surface to be cleaned before proceeding.
6 ENGLISH (Original instructions) Safety of others u This appliance can be used by children aged from 8 years and above and persons with reduced physical, sen- sory or mental capabilities or lack of e.
7 ENGLISH (Original instructions) Features This appliance includes some or all of the following features. 1. ON/Off switch 2. Smartselect TM button 3. Removable water tank 4. Handle 5. Steam head 6. Steam head cleaning pad 7. Delta head cleaning pad 8.
8 ENGLISH (Original instructions) Note: head to the steam head. delta head clicks into place. Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.
9 ENGLISH (Original instructions) Steam cleaning loop’ side facing up. Raise the steam mop off the resting mat (8) and lightly press it down onto the cleaning pad (6 or 7). Place the steam mop on the resting mat. Connect the steam mop to the mains.
10 ENGLISH (Original instructions) Maintenance and cleaning Y our Black & Decker corded appliance has been designed to operate over a long period of time with a minimum of main- tenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning.
.
90591389 10/12 Australia & New Zealand Stanley Black & Decker 82 T aryn Drive, Epping, VIC 3076 Australia T el.1800 338 002 (Aust) or T el. 0800 339 258 (NZ).
An important point after buying a device Black & Decker FSM1630-XE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker FSM1630-XE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker FSM1630-XE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker FSM1630-XE you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker FSM1630-XE will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker FSM1630-XE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker FSM1630-XE.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker FSM1630-XE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker FSM1630-XE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center