Instruction/ maintenance manual of the product EM100 Black & Decker
Go to page of 2
CHOOSING A MOUNTING LOCA TION Y our †Spacemaker* Can Opener may be mounted under a cabinet. When selecting a mounting location: • Consider your normal work pattern and the possible addition of other under -the-cabinet appliances. • Do not mount the Can Opener above cooking/heating appliances or near a sink.
approximately 1 ⁄ 4 ” - 1 ⁄ 2 ” (.64 cm-1.27 cm) back from the front edge of the cabinet. NOTE: Be sure the can opener is not set too far back. Hold the unit up to the cabinet floor and lift the Lever to be sure it clears the cabinet. Mark the holes through the Assembly onto the underside of the cabinet with a pencil (B).
An important point after buying a device Black & Decker EM100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker EM100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker EM100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker EM100 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker EM100 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker EM100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker EM100.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker EM100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker EM100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
