Instruction/ maintenance manual of the product EC43 Black & Decker
Go to page of 12
Countertop Can Opener SA VE THIS USE AND CARE BOOK 1-800-23 1 -9786 QUESTIONS? Please call us TOLL FREE! ? MODELS EC42, EC42C, EC43, EC43B EC43 Shown.
When using electrical appliances, basic safety precautions should always be followed, including the following: ■ Please read all instructions. ■ T o protect against risk of electrical shock, do not put can opener , cord, or plug in water or other liquid.
Knife Sharpener (Models EC43 and EC43B Only) 3 This appliance has a polarized plug—one blade is wider than the other . As a safety fea- ture, this plug will fit into a polarized outlet only one way . If the plug does not fit fully into the outlet, reverse the plug.
1. First, install the Magnet. Line up the vertical tab on the Magnet assembly with the ver- tical hole on the Pierce Lever , then push into the Pierce Lever , and turn until it locks into posi- tion. (Figure A) 2. Plug the cord into a standard, 120-volt electrical outlet.
• This Can Opener should not be used to open cans that are designed to be opened by anoth- er method, such as a pull tab, ring opener , pull strip, peel-off foil seal, or rolling key (i.e. *Spam ® , **Crisco ® , sardines, etc.). This Can Opener will not open rimless cans.
down while the knife is being sharpened. This will lessen any movement across the countertop during knife sharpening. 3. Lower the end of the knife blade which is closest to the handle into either the right or left Slot of the Sharpener until it lightly touches the Grinding Wheel.
6. The Grinding Wheel is specially designed to prevent “burning” of the knife blade. If the Wheel stalls or stops, the blade is being pressed too hard against the Wheel. 7. Both the Can Opener and the Knife Sharpener are intend- ed for household use only .
The Assembly can be washed by hand in hot, sudsy water , rinsed and dried thoroughly . After each cleaning, add a few drops of cooking or mineral oil to the Cutter Blade. 3. Before replacing the Pierce Lever Assembly , wipe the Can Opener body , and area around the drive wheel with a slightly damp cloth.
Center and be sure to give your return address. W e also suggest that you insure the package for your protection. Consumer replaceable parts and acces- sories are also available at Black & Decker (U.S.) Inc., Household Appliance Company- Owned or Authorized Service Centers.
10 ST . PETERSBURG — 5635 49th St. North, 33709 813-525-0273 TA M PA — 3432 W est Kennedy Blvd., 33609 813-872-8317 WEST P ALM BEACH — 310 South Military T rail, 33415 407-689-3247 GEORGIA A TLANTA (South) — 5330 Old National Hwy.
11 NEW YORK (Elmhurst) — 77-20 Queens Blvd., 11373 718-335-1042 NEW YORK (Manhattan) — 50 West 23rd St., 10010 212-929-6450 NEW YORK (Westbury , L.I.) — 1061 Old Country Rd., 11590 516-997-6140 ROCHESTER — 2969 W . Henrietta Rd., 14623 716-424-1310 SYRACUSE — 3485 Erie Blvd.
Black & Decker (U.S.) Inc. warrants this product against any defects that are due to faulty material or workmanship for a two- year period after the original date of con- sumer purchase or receipt as a gift. This warranty does not include damage to the product resulting from accident or misuse.
An important point after buying a device Black & Decker EC43 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker EC43 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker EC43 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker EC43 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker EC43 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker EC43, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker EC43.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker EC43. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker EC43 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
