Instruction/ maintenance manual of the product CM2040 Black & Decker
Go to page of 56
INSTRUCTION MANUAL 40v Max* Lithium Cordless Mower Thank you for choosing B L AC K + DECKE R ! PLE AS E REA D BE FORE R ETU RNI NG TH IS PRO DUC T FOR ANY REASON. If yo u have a qu est io n or expe rie nce a p rob lem w ith yo ur B L AC K + DECKE R purchas e, go t o http:/ /www.
2 The following are explanations of important safety hazard pictorials on the mower. 1. User must read and understand the instruction manual. 2. To avoid the risk of serious injury do not mow up and down slopes.
3 while wearing sandals. Always wear substantial footwear. 7. Do not pull mower backward unless absolutely necessary. Always look down and behind before and while moving backward. 8. Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction.
4 necessary replace with BLACK+DECKER recommended parts only. 9. Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.
FUNCTIONAL DESCRIPTION 1. Switch box 2. Bail handle 3. Upper-handle 4. Lower-handle 5. Upper-handle attachment levers (2) 6. Lower-handle attachment levers (2) 7. Cut height adjust lever 8. Grass collection bag 9. Rear door cover 10. Battery port 11. Battery storage compartment 12.
6 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGERS SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers. .
7 WARNING: BURN HAZARD. BATTERY LIQUID MAY BE FLAMMABLE IF EXPOSED TO SPARK OR FLAME. Charge the battery packs only in BLACK+DECKER chargers. DO NOT splash or immerse in water This may cause premature cell failure.
metal shed, or an uninsulated trailer. 3. If the battery pack does not charge properly: a. Check current at receptacle by plugging in a lamp or other appliance b. Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.
9 TO REMOVE BATTERY PACK: described above. Depress the battery release button (17) on the battery pack and pull battery pack out of tool as shown in figure D .
10 NOTE: Make sure the cord is located on the front of both handles. If it is not it may result in the cord tangling and the inability to easily store the mower (Figure I). I of the upper handle (3), slid e the lever bolt through the holes.
11 M 28 27 OPERATION READ THIS INSTRUCTION MANUAL BEFORE OPERATING YOUR MOWER. See “Functional Description” on page 6 to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. WARNING: Sharp moving blade .
12 NOTE: When the side discharge attachment is attached EdgeMax™ can only be used on the right side of the mower. R R1 STORAGE WARNING : Rotating blade can cause serious injury. Release BAIL HANDLE (2) to turn mower off, remove safety key, and remove battery before lifting, transporting, or storing the mower.
13 T 5 3 4 as shown in Figure U . U CARRYING THE MOWER DANGER: ROTATING BLADES CAN CAUSE SERIOUS INJURY.
14 REINSTALLED CORRECTLY, AS DESCRIBED BELOW. IMPROPER ASSEMBLY OF THE BLADE OR OTHER PARTS OF THE BLADE SYSTEM MAY CAUSE SERIOUS INJURY. 1. WARNING : RELEASE BAIL HANDLE TO TURN MOWER OFF , WAIT FOR THE BLADE TO STOP, AND REMOVE SAFETY KEY AND BATTERY PACK .
15 Z 38 39 35 BLADE BALANCING (Figure Z1) Check balance of the blade (35) by placing center hole in the blade over a nail or round shank screwdriver (40) , clamped horizontally in a vise (38). If either end of the blade rotates downward, file along the sharp edge of that dropping end.
16 TROUBLESHOOTING PROBLEM SOLUTION 1. Mower doesn’t run when bail handle is activated. A. Check to make sure safety key has been installed and is fully seated and that button on switch housing is being completely depressed before pulling bail handle.
17 SERVICE INFORMATION All BLACK+DECKER Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the BLACK+DECKER location nearest you.
18 Consulter le site W e b www.Bl ackandDecker .com/New Owner pour enregistrer v otre nouv eau produit. MODE D’EMPLOI TONDEUSE SANS FIL AVEC BLOC- PILES AU LITHIUM-ION DE 40 V MAX.* Me rci d ’avoir c hoi si B L AC K + DECKE R ! Co ns ult er le s ite Web www.
19 danger importants sur la tondeuse.
20 9. Ne pas utiliser la tondeuse sans install - er le collecteur d’herbe, la protection de .
21 .
22 une chute de tension de ligne et donc une perte de puissance et une surchauffe.
23 DIRECTIVES DE SÉCURITÉ IMPORTANTES POUR LES CHARGEURS DE PILES CONSERVEZ CES INSTRUCTIONS: Ce manuel contient des consignes de de batterie.
24 toute surface. Le chargeur est destiné à une utilisation sur une surface plane et stable (c.-à-d. un dessus de table ou d’établi).
25 TRANSPORTER DES PILES POUR LE COMMERCE ET DANS LES AVIONS (C.-À-D. DANS LES VALISES ET LES BAGAGES À MAIN) À MOINS QU’ELLES NE SOIENT BIEN PROTÉGÉES CONTRE LES COURTS-CIRCUITS.
26 à distance des ouvertures du chargeur.
27 E Blocs-piles au LI-ION et chargeurs correspondants Ce produit est compatible avec tous les modèles de piles et .
28 complètement. Ajuster en ouvrant le .
29 DANGER : Lame mobile tranchante. Ne jamais utiliser la tondeuse en mode .
30 .
31 U TRANSPORT DE LA TONDEUSE DANGER : DES LAMES EN MOUVEMENT (ROTATION) RISQUENT DE PROVOQUER DE GRAVES BLESSURES.POUR PRÉVENIR DE .
32 MAUVAIS ASSEMBLAGE DE LA LAME OU D’AUTRES PARTIES DU SYSTÈME DE LAME PEUT PROVOQUER DE GRAVES BLESSURES CORPORELLES. 1. AVERTISSEMENT : RELÂCHER L’ANSE POUR ÉTEINDRE LA TONDEUSE, ATTENDRE QUE LA LAME S’IMMOBILISE ET RETIRER LA CLÉ DE SÛRETÉ ET LE BLOC-PILES.
33 de ne pas vous couper. 5. Aiguiser soigneusement les arêtes coupantes de la lame avec une lime à dents fines (39) ou une pierre à original de l’arête.
34 LE SCEAU SRPRC MC Le sceau SRPRC MC de recyclage des piles rechargeables) sur la pile au lithium-ion (ou sur le .
35 GUIDE DE DÉPANNAGE PROBLÈME SOLUTION .
36 PAUTAS DE SEGURIDAD/DEFINICIONES .
37 A continuación se presentan explicaciones de las ilustraciones de importantes riesgos de seguridad correspondientes a la podadora. 1. El usuario debe leer y comprender el manual de instrucciones. 2. Para evitar el riesgo de lesiones graves no corte el pendientes.
38 rebotar y golpear al operador. Al cruzar superficies de grava, suelte la palanca del interruptor para apagar la podadora y detener la hoja. 9. No opere la podadora si el recolector .
39 antes de guardarla. .
40 para la herramienta; es decir, un .
41 o AC ...... corriente alterna o DC .... corriente directa no ............... no velocidad sin carga ................ (mis à la terre) ................ terminal a tierra ............... .
42 • ADVERTENCIA: El cargador suministrado con este producto debe enchufarse de manera que quede correctamente orientado en posición de montaje vertical o en el piso.
43 ADVERTENCIA: NUNCA INTENTE ABRIR EL PAQUETE DE BATERÍAS POR NINGÚN MOTIVO. SI LA CAJA DEL PAQUETE DE BATERÍAS ESTÁ AGRIETADA O DAÑADA, NO LA INTRODUZCA EN EL CARGADOR.
44 (+40 °F) o por encima de +40,5 °C (+105 .
45 B 14 15 C 16 PARA EXTRAER EL PAQUETE DE BATERÍAS: .
46 G INSTALACIÓN DEL MANGO SUPERIOR (FIGURA H) mango (5), las tuercas (20) y las arandelas (21) del mango.
47 FORMACIÓN DE MANTILLO descarga lateral (27) y la bolsa de .
48 corte, comience cortando con la palanca redúzcala según sea necesario, como se muestra en la Figura O .
49 EDGEMAX™ (FIG. R) directamente hasta el borde de una pared o una valla ( fig.
50 mangos de transporte (12) como se muestra en la Figura V . NO intente levantar superior (3) o el mango inferior (4).
51 con la llave de 12,7 mm (1/2 pulg.
52 SIMETRÍA DE LA HOJA (FIGURA Z) Revise la simetría de la hoja (35) colocando el agujero central de esta sobre un clavo o un destornillador horizontalmente en una prensa (38).
53 BLACK+DECKER o a un comerciante .
54 GUÍA DE SOLUCIÓN DE PROBLEMAS PROBLEMA SOLUCIÓN .
55 · GARANTÍA BLACK+DECKER · BLACK+DECKER WARRANTY . SOLAMENTE PARA PROPOSITOS DE MEXICO Distributor Name · Sello firma del distribuidor Date of purchase · Fecha de compra Invoice No. · No. de factura PRODUCT INFOMATION · IDENTIFICACIÓN DEL PRODUCTO Cat.
56 Cat.No. CM2040 Form No. 90615559 REV01 November 2014 Copyright © 2014 BLACK+DECKER Printed in China Grupo Realsa en herramientas, S.A. de C.V. Súper Manzana 69 MZ.01 Lote 30 (Av. Torcasita) Cancún, Quintana Roo Tel.
An important point after buying a device Black & Decker CM2040 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker CM2040 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker CM2040 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker CM2040 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker CM2040 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker CM2040, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker CM2040.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker CM2040. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker CM2040 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
