Instruction/ maintenance manual of the product FKM BKI
Go to page of 60
Electric Pressure Fryer MODELS FKM, FKM-F, & FKM-FC Service Manual Serial Numbers 137733 and higher.
Warranty Information LIMITED ONE YEAR WARRANTY BKI (The "Company") warrants to the original purchaser that at time of shipment from the Com pany factory, this equipment will be fre e from defect in materials and workmanship.
T able of Content s Table of Contents .............................................................................................................. .......................... 1 Introduc tion ...........................................................
Electric Pressure Fryer Introduction 2 Introduction The FKM Pressure Fryer is compact, attractive and functional in design. It is constructed of a stainless steel fryer pot for cleaning ease.
Electric Pressure Fryer Introduction 3 Specific Precautions Lids for FKM Pressure Fryers manufa ctured prior to May 27, 1980 (or units with serial numbers lower than 3613 ) co uld be manually opened while under pressure resulting in serious injury or death.
Electric Pressure Fryer Introduction 4 Safe Work Practices Noncombustible Floors Only Make sure your floor is non comb ustible. Do not operate your fryer on floors that are wood, car peted or have rubber mats. • Placing your fryer on a combustible floor could cause a fire.
Electric Pressure Fryer Introduction 5 Do Not Overfill The Fryer With Shortening Hot shortening and steam may esc ape and bu rn you if you put too much shortening in the fryer. Fill the fryer to approximately one inch below the fill marks that are in side the fryer pot.
Electric Pressure Fryer Introduction 6 Wear Safe Clothing Appropriate To Y our Job Always wear your insulated mitts when handling the fryer basket or touch any hot metal surfaces.
Electric Pressure Fryer Introduction 7 Keep Safety Labels Clean and in Goo d Condition Do not remove or cover any safety labels on your e quipment. Keep all safety labels clean and in good con dition. Repl ace any damaged or missing safety labels. Refer to the Safety Labels section for illustration and location of safety labels on this unit.
Electric Pressure Fryer Introduction 8 Safety Labels.
Electric Pressure Fryer Introduction 9.
Electric Pressure Fryer Installation 10 Inst allation For installation information refer to Electric Pressure Fryer, MODELS FKM, FKM-F, & FKM-FC, Installation and Operation Manual LI0102.
Electric Pressure Fryer Operation 11 Operation Controls and Indicators Refer to the figure and table below for a n expl anatio n of the fryer’s controls and indicators.
Electric Pressure Fryer Operation 12 Item # Description Function 1 Spin Handle Used to tighten the lid to the pot once it is latched. 2 Pop Safety Valve lever Used to release pres sure periodi cally to prevent the seat from sticking. 3 Pressure Gauge Indicates the pressure inside the pot.
Electric Pressure Fryer Operation 13 Item # Description Function 8 ALARM button This button allows the user to set an elapsed time at which the internal alarm will sound during a cycle. The time is set by pressing and holding the ALARM button while using the UP and DOWN arrows to change the time.
Electric Pressure Fryer Operation 14 Care of the Shortening Solid shortening should always be retu rn ed to the filter vat while in the liquid state. If this is not done, it will have to be heated to a liquid state. When usi ng solid shorteni n g, the fryer must be equipped with a pump heater.
Electric Pressure Fryer Operation 15 Use only high-quality shortening that has low moi sture content, a high smoke point and no additives. 3. The digital timer has a STIR OIL function that operates in on e of four reconfigu rable modes. If the timer needs to be reconfigured, follo w step a.
Electric Pressure Fryer Operation 16 Cooking (FKM a nd FK M-F) Do not open the drain valve or the fill valve while the fryer is under pressure. Serious burns may re sult. 1. Ensure that the Start-Up procedures have been pe rformed. 2. When frying chicken, lower the basket into the sho rteni ng in the fryer pot.
Electric Pressure Fryer Operation 17 14. Remember to filter the shortening at least ever y third frying cycle load. Refer to the procedure in this manual. Also filter the shortening and cl ean the fryer at the end of each day. If you do not plan to use the fryer for an hour or more, turn the thermostat do wn to 150 and close the lid.
Electric Pressure Fryer Operation 18 Table 1. System Program m ing Procedure STEP ACTION DISPLAY COMMENTS 1 Press the FILTER/OFF/FRY switch to FRY . LOW 2 Press PROG on the keypad. PROGRAM CODE 3 Input 1712 and ENTER. PROGRAM SYSTEM 4 Press ENTER. PROGRAM DEGREES ° F This command allows you to choose the temperature scale option you want to use.
Electric Pressure Fryer Operation 19 Product Programming Use the following figure and table to set a maximum of eight produ ct programs. The product program s must be set before cooking can begin.
Electric Pressure Fryer Operation 20 Table 2. Product Programm ing Procedure STEP ACTION DISPLAY COMMENTS 1 Press the FILTER/OFF/FRY switch to FRY . LOW 2 Press PROG on the keypad. PROGRAM CODE 3 Input 1724 and press E NT E R. PROGRAM PRODUCT # 4 Select the program product number (1-8).
Electric Pressure Fryer Operation 21 STEP ACTION DISPLAY COMMENTS 12 Press TOGGLE/CLEAR until the desired option is displayed. PROGRAM VALVE1 X X refers to the solenoid valve option selected. OPEN is used for Models ALF and BLF Automa tic Lift fryers.
Electric Pressure Fryer Operation 22 Start-Up (FKM-FC) 1. Make sure the main drain valve is clo sed. 2. Fill pot with shortening to about one inch below the m ark. Risk of fire exists if the oil level drops below the minimum oil level. The level of oil within the pot must not fall below 5mm of the maximum oil level.
Electric Pressure Fryer Operation 23 4. Carefully drop the chicken in the shortening one piece at a time starting with thi ghs a nd drumsticks. The fryer is designed to a ccommodate 48-50 pie ces of chicken. Failure to use the insulat ed mitts will result in seve re injury.
Electric Pressure Fryer Maintenance 24 Maintenance For maintenance information refe r to Electric Pressure Fryer, MO DELS FKM, FKM-F, & FKM-FC, Installation and Operation Manual LI0102.
Electric Pressure Fryer Replacement Parts 25 Replacement Part s Use the information in this section to identify repl acement parts. To order repla ceme nt part s, call your local BKI sales and service representat ive. Before calli ng, please note the serial number, model numbe r and voltage on the rating tag affixed to the unit.
Electric Pressure Fryer Replacement Parts 26 Figure 3. Dead Weight Assembly Table 3. Dead Weight Assembly Parts ITEM # PART # QTY DESCRIPTION 1 FT0395 1 PIPE, POPOFF VALVE BAFF BOX 2 FT0396 1 PIPE, DE.
Electric Pressure Fryer Replacement Parts 27 Figure 4. Door Assembly Table 4. Door Assembly Parts ITEM # PART # QTY DESCRIPTION 1 F0083 2 THR EAD IN SERT 10-2 4 STEE L 2 ST0013 1 BRACKET, BRUSH HOLDER.
Electric Pressure Fryer Replacement Parts 28 Figure 5. Drain/Motor/Piping Assembly.
Electric Pressure Fryer Replacement Parts 29 Table 5. Drain/Motor/Piping Assembly Parts ITEM # PART # QTY DESCRIPTION 1 MB19101000 1 DRAIN VALVE REPLACEMENT 2 FT0044 1 ELL, STREET 3/8 90 DEG BLACK 3 F.
Electric Pressure Fryer Replacement Parts 30 Figure 6. Drain Valve & Plugs Table 6. Drain Valve & Plugs Parts ITEM # PART # QTY DESCRIPTION 1 MB19101000 1 DRAIN VALVE REPLACEMENT 2 FT0243 2 PL.
Electric Pressure Fryer Replacement Parts 31 Figure 7. Domestic/European Front Panel FKM/FKM-F Table 7. Domestic/European Front Panel FKM/FKM-F Parts ITEM # PART # QTY DESCRIPTION 1 N0522 1 DECAL, CTL.
Electric Pressure Fryer Replacement Parts 32 Figure 8. Front Panel FKM-FC Table 8. Front Panel FKM-FC Domestic Parts ITEM # PART # QTY DESCRIPTION 1 N0524 1 DECAL, CTL PNL FKMFC 2 S0104 1 SWITCH, RKR .
Electric Pressure Fryer Replacement Parts 33 Figure 9. Lid/Top (sheet 1 of 4).
Electric Pressure Fryer Replacement Parts 34 Figure 9. Lid/Top (Sheet 2 of 4).
Electric Pressure Fryer Replacement Parts 35 Figure 9. Lid/Top (Sheet 3 of 4).
Electric Pressure Fryer Replacement Parts 36 Figure 9. Lid/Top (Sheet 4 of 4).
Electric Pressure Fryer Replacement Parts 37 Table 9. Lid/Top Parts ITEM # PART # QTY DESCRIPTION Figure 9 (sheet 1) SB1992S LID/TOP Figure 9 (sheet 2) SB3481 1 HANDLE ASSY, SPIN 1 FT0332 3 STUD, 5.
Electric Pressure Fryer Replacement Parts 38 Figure 10. Oil Vat Assembly.
Electric Pressure Fryer Replacement Parts 39 Table 10. Oil Vat Assembly Parts ITEM # PART # QTY DESCRIPTION AN16010300 1 FILTER SCREEN ASSY,FKM 1 SB1991 1 QUIK DISCONNECT BRACKET WELDMENT 2 O0013 1 O-.
Electric Pressure Fryer Replacement Parts 40 Figure 12. Domestic/European Rea r Panel FKM/FK M-F Table 12. Domestic/European Rear Pa nel FKM/FKM-F Parts ITEM # PART # QTY DESCRIPTION 1 T0036 1 THERMOS.
Electric Pressure Fryer Replacement Parts 41 Figure 13. Rear Panel FKM-FC Table 13. Rear Panel FKM-FC Parts ITEM # PART # QTY DESCRIPTION 1 T0036 1 THERMOSTAT, HI LIMIT 540 DEG 2 R0148 1 RELAY, 3 POLE.
Electric Pressure Fryer Replacement Parts 42 Figure 14. Solenoid Valve Assembly Table 14. Solenoid Valve Assembl y Parts ITEM # PART # QTY DESCRIPTION 1 FT0249 1 CONNECTO R, 3/8 STR F LEX LIQUIDT ITE .
Electric Pressure Fryer Replacement Parts 43 Accessories Description Accessory # Figure # Item # BASKET, LARGE FKM BAIL HANDLE B0114 Figure 15 1 BRUSH, DRAIN (LONG WHITE ) B0075 Figure 15 2 BRUSH, L T.
Electric Pressure Fryer Replacement Parts 44 Components Description Component # Figure # Item # ARM ADJUSTABLE STOP /FKM A0101 Figure 16 1 BAFFLE BOX ASSEMBLY AN19102800 Figure 16 2 BRACKET, CALROD FK.
Electric Pressure Fryer Replacement Parts 45 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21.
Electric Pressure Fryer Wiring Diagrams 46 Wiring Diagrams Figure 17. FKM-F 208V/220V/240 M.
Electric Pressure Fryer Wiring Diagrams 47 Figure 18. FKM-F 220V/380V, 230V/400V, 240V/415V M.
Electric Pressure Fryer Wiring Diagrams 48 Figure 19. FKM-FC 208V/220V/240V (Sheet 1 of 4).
Electric Pressure Fryer Wiring Diagrams 49 Figure 19. FKM-FC 208V/ 220V/240V (Sheet 2 of 4).
Electric Pressure Fryer Wiring Diagrams 50 Figure 19 . FKM-FC 208V/220V/240V (Sheet 3 of 4).
Electric Pressure Fryer Wiring Diagrams 51 Figure 19. FKM-FC 208V/220V/240V (Sheet 4 of 4).
Electric Pressure Fryer Wiring Diagrams 52 Figure 20. FKM-FC 220V/380V, 230V/4 00V, 240V/41 5V (Sheet 1 of 4).
Electric Pressure Fryer Wiring Diagrams 53 Figure 20. FKM-FC 220V/380V, 230V/4 00V, 240V/415V (Sheet 2 of 4).
Electric Pressure Fryer Wiring Diagrams 54 Figure 20. FKM-FC 220V/380V, 230V/4 00V, 240V/415V (Sheet 3 of 4).
Electric Pressure Fryer Wiring Diagrams 55 Figure 20. FKM-FC 220V/380V, 230V/4 00V, 240V/415V (Sheet 4 of 4).
Electric Pressure Fryer Notes 56 Notes.
Electric Pressure Fryer 57.
P.O. Box 80400, Simpsonvill e, S.C. 29680-0400, USA http://www.bkideas.co m Made and printed in t he U.S.A LI0192/0808.
An important point after buying a device BKI FKM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BKI FKM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BKI FKM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BKI FKM you will learn all the available features of the product, as well as information on its operation. The information that you get BKI FKM will certainly help you make a decision on the purchase.
If you already are a holder of BKI FKM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BKI FKM.
However, one of the most important roles played by the user manual is to help in solving problems with BKI FKM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BKI FKM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
