Instruction/ maintenance manual of the product 3107 Series Bissell
Go to page of 12
Safety Instructions Product View Assembly Operations / Maintenance CatchAll ™ USER’S GUIDE 3107 Series 3 4 5 6-9 T roubleshooting 10 Replacement Parts 11 Warranty 12.
2 Thanks for Buying a CatchAll Bare Floor Cleaner W e’re glad you purchased a CatchAll Bare Floor Cleaner . Ever ything we know about floor care and cleaning went into the design and construction of this handy appliance. Y our Ca tchAll is well made, and we back it with a limited one-year warranty .
3 IMPOR T ANT SAFETY INSTRUCTIONS ■ Do not use the charging base for any uses other than charging the battery pack 310BP that came with your CatchAll. Other batteries may explode. ■ Do not unplug charging base by pulling cord. T o unplug, grasp the plug, not the cord.
4 Rechargeable Batter y Pack Cloth Gripper On/Off Button Furniture Protection Guard Rotating Brush/Blade Dirt Cup Release Cloth Holder Dirt Cup and Filter Handle Assembly Handle Grip Dust Blade Rotati.
This User’ s Guide has been designed to help you get the most satisfaction from your CatchAll Bare Floor Cleaner . Enc losed you’ll find assembly instructions, tips for all c leaning tasks, safety precautions, plus maintenance and troubleshooting instructions.
6 T ip: T o extend the life of your batteries remove the Battery Pack from the Charging Base when charging is complete (after 6- 8 hours). Charging The Batter y Continued Decreased operating time may indicate the battery has built up a charging resistance.
7 If the Battery Pack is not already in your CatchAll, remove it from the Charging Base and press firmly into place aligning the metal contacts on the bottom. Tip the Handle back into typical use position. T urn the cleaner on by pressing the On/Off Button on the top of the vacuum.
8 The key to maximum performance is emptying the Dirt Cup frequently and cleaning the F ilter . Emptying the Dirt Cup after each use, and c leaning the Filter periodically , will help your CatchAll operate at peak efficiency . Use only BISSELL Replacement Filters (203-2518) in your BISSELL CatchAll.
9 Use BISSELL Replacement Belts (203-2519) in your BISSELL CatchAll. Remove the Battery Pack from the cleaner . T urn the cleaner over and remove the two screws as shown with a Phillips head screwdriver . Remove both the Brush Covers by pulling up on the end where the screw was and lift out.
10 W ARNING: This product contains a nickel-cadmium (Ni-Cd) rechargeable battery pack. According to F ederal and State regulations, remov al and proper disposal of Ni-Cd batteries is required. For disposal of the Batter y Pack in your CatchAll, see instructions below: 1.
11 Replacement P arts Y ou may purchase replacement parts from your retailer , by calling BISSELL Consumer Services or by visiting our website. T o locate a retailer near you, or to place an order using VISA, MasterCard, Discover , or American Express, call: BISSELL Consumer Ser vices 1-800-237-7691 Monday - Friday 8 a.
12 ©2003 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 603-2539 Rev 07/03 Visit our website at: www .bissell.com This warranty gives you specific legal rights, and you may also have other rights which may vary from sta te to state.
An important point after buying a device Bissell 3107 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 3107 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 3107 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 3107 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 3107 Series will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 3107 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 3107 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 3107 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 3107 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
