Instruction/ maintenance manual of the product NM70I-1037U Ver. 6.x Biostar
Go to page of 36
NM70I-847/NM70I-807/ NM70I-1007U/NM70I- 1037U Setup Manual FCC Information and Copyright This equipment has bee n tested and found to comply with the limit s of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de signed to provide reasonable protection against harmful inte rference in a residential installation.
Table of Contents Chapter 1: Introduction .......................................... 1 1.1 Before Y ou S t art ................................................................................ 1 1.2 Package Checklist ...................................
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 1 CHAPTER 1: INTRODUCTION 1.1 Before You Start Thank you for choosing our product. Before you st art installing the motherboard, please make sure you foll ow the instructions below: Prepare a dry and stable worki ng environment with suf ficient lighting.
Motherboard Manual 2 1.3 Motherboard Specifications Specifications CPU Support NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® P rocessor 1007U (Dual Core 1.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 3 1.4 Central Processing Unit (CPU) The motherboard is equipped with an onboard Intel processor and a CPU cooler . Model: Onboard Intel CPU: NM70I-847 Intel® Celeron® Processor 847 (Dual Core 1.1GHz, Sand y Bridge) NM70I-807 Intel® Celeron® Processor 807 (Single Core 1.
Motherboard Manual 4 1.6 Motherboard Layout Note: ■ represents the 1 st pin..
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 5 CHAPTER 2: HARDWARE INSTALLATION 2.1 Connect Cooling Fans These fan headers support cooling-fa ns bu ilt in the computer . The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the bl ack wire to pin#1.
Motherboard Manual 6 2.2 Install System Memory A. DDR3 Modules Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on t he DIMM matches the break on the slo t.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 7 C. Dual Channel Memory Installation Please refer to the following requir ement s to activate Dual Channel function: Install memory module of the same de nsity in pairs, shown in the table.
Motherboard Manual 8 2.4 Jumper Setting The illustration sho ws how to set up jumpers. When the jumper cap is plac ed on pins, the jumper is “close”, if no t, that means the jumper is “open”.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 9 2.5 Headers & Connectors ATXPWR1: ATX Power Source Connector This connector allo ws user to connect 24-pin power connector on the A TX power supply . Pin Assignment Pin Assig nment 13 +3.3V 1 +3.3V 14 -12V 2 +3.
Motherboard Manual 10 PANEL1: Front Panel Header This 16-pin connector includes Po wer-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connec t the PC case’s front p anel switch functions.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 11 F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel This header allo ws user to connect additional USB cable on the PC front panel, and also can be connected with a wide range of simultaneously accessible external Plug and Play peri pherals.
Motherboard Manual 12 JSPDIFOUT1: Digital Audio-out Connector The JSPDIFOUT1 is for connecting the PCI bracket SPDIF output. Pin Assignment 1 +5V 2 SPDIF_OUT 3 Ground J_COM1: Serial Port Connector The motherboard has a Serial Port Conn ector for connecting RS-232 Port.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 13 J_PRINT1: Printer Port Connector This header allo ws you to connector printer on the PC. Pin Assignment Pin A ssi gnment 1 -S trobe 14 Ground 2 -ALF 15 .
Motherboard Manual 14 CHAPTER 3: UEFI BIOS & SOFTWARE 3.1 UEFI BIOS Setup z For better system performanc e, the UEFI BIOS firmware is being continuously updated.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 15 6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Y es to start updating BIOS. 7. A dialog pops out after BIOS flash is completed, asking you to restart the system.
Motherboard Manual 16 4. An open dialog will show up to request your agreement to start the BIOS update. Click Ye s to start the online update procedure. 5. If there is a new BIOS version, the utility will ask you to download it. Click Ye s to proceed.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 17 4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure. 5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open .
Motherboard Manual 18 3.3 Software Installing Software 1. Insert the Setup DVD to the optical dr ive. The driver installation program would appear if the Autorun function has bee n enabled. 2. Select Soft w are Inst allation , and then click on the respective software title.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 19 After filling up this information, click “ Send ” to send the mail out. A warning dialog would appear asking for your confirmation; click “ Send ” to confirm or “ Do Not Send ” to cancel. If you want to save this inform ation to a .
Motherboard Manual 20 BIOScreen Utility This utility allows yo u to personalize your boot logo easily . Y ou can choose BMP as your boot logo so as to customize your computer. Please follow the step-by-step instructions b elow to update boot logo: z Load Image ： Choose the picture as the bo ot logo.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 21 Rapid Start Technology Intel® Rapid S tart technology enables your system to get up and running faster from even the deepest sleep, saving time and po wer consumption.
Motherboard Manual 22 3-3 After rebooting, the system will setup Intel® Rapid Start Technology automatically. We recommend you restart the system after this installation is complete, Ste p 4: Configu.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 23 CHAPTER 4: USEFUL HELP 4.1 Driver Installation After you installed your operating system, please ins ert the Fully Setup Driver DVD into your optical drive and install t he dr iver for better system performance.
Motherboard Manual 24 4.2 Extra Information CPU Overheated If the system shutdown automatically afte r power on system for seconds, that means the CPU protection function has been activat ed. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the syst em may not po wer on again.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 25 4.3 AMI BIOS Beep Code Boot Block Beep Codes Number of Beeps Description Continuing Memory sizing error or Memory module not found POST BIOS Beep Codes Number of Beeps Description 1 Success booting. 8 Display memory error (system video a dapter) 4.
Motherboard Manual 26 APPENDIX: SPEC IN OTHER LANGUAGES Arabic تﺎﻔﺻاﻮﻤﻟ ا ﺔﺠﻟﺎﻌﻤ ﻟا ةﺪﺣو ةﺪ ﻋﺎﻗ ﺔﻳﺰآﺮﻤﻟا NM70I-847: Intel® Celeron® Proc essor 847 ( Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Proce ssor 807 ( Single Core 1.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 27 French Spécifications Support Unité Centrale NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® P rocessor 1007U (Dual Core 1.
Motherboard Manual 28 German Spezifikationen CPU-Unterstützung NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® P rocessor 1007U (Dual Core 1.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 29 Italian Specificazioni Supporto processore NM70I-847: Int el® Celeron® Processo r 847 (Dual Core 1.1GHz) NM70I-807: I ntel® Celeron ® Processor 80 7 (Single Core 1.5GHz ) NM70I-1007U: Intel ® Celeron® Processor 10 07U (Dual Core 1.
Motherboard Manual 30 Japanese 仕様 CPU サポート NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® P rocessor 1007U (Dual Core 1.5 GHz) NM70I-1037U: Intel® Celeron® P rocessor 1037U (Dual Core 1.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 31 Polish Specyfikacje techniczne Obs ł uga procesora NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® P rocessor 1007U (Dual Core 1.
Motherboard Manual 32 Portuguese Especificações Suporte Processador NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® P rocessor 1007U (Dual Core 1.
NM70I-847/NM70I-807/ NM70I-1007U/NM70I-1037U 33 Russian Спецификации Поддержка центрального процессора NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.
Motherboard Manual 34 Spanish Especificaciones Compatib ilidad co n el procesador NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® P rocessor 1007U (Dual Core 1.
An important point after buying a device Biostar NM70I-1037U Ver. 6.x (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Biostar NM70I-1037U Ver. 6.x yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Biostar NM70I-1037U Ver. 6.x - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Biostar NM70I-1037U Ver. 6.x you will learn all the available features of the product, as well as information on its operation. The information that you get Biostar NM70I-1037U Ver. 6.x will certainly help you make a decision on the purchase.
If you already are a holder of Biostar NM70I-1037U Ver. 6.x, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Biostar NM70I-1037U Ver. 6.x.
However, one of the most important roles played by the user manual is to help in solving problems with Biostar NM70I-1037U Ver. 6.x. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Biostar NM70I-1037U Ver. 6.x along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
