Instruction/ maintenance manual of the product BASF1016G Bionaire
Go to page of 2
INST ALLA TION OF A PLUG APPLICABLE T O U .K. AND IRELAND The wires in this mains lead are coloured in accordance with the following code: Blue - Neutral Brown - Live This appliance is fitted with a 13 amp plug. The fuse should be rated at 3 amps and AST A approved to BS1362.
Final assembly 1. Insert the fan neck joint into the hollow end of the top pole and slowly turn the neck joint to lock in place. Be careful to align the cutaway/ grooves on the neck joint with the two protruding raised pieces inside the hollow end of the pole.
An important point after buying a device Bionaire BASF1016G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bionaire BASF1016G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bionaire BASF1016G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bionaire BASF1016G you will learn all the available features of the product, as well as information on its operation. The information that you get Bionaire BASF1016G will certainly help you make a decision on the purchase.
If you already are a holder of Bionaire BASF1016G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bionaire BASF1016G.
However, one of the most important roles played by the user manual is to help in solving problems with Bionaire BASF1016G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bionaire BASF1016G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
