Instruction/ maintenance manual of the product SPEAKEASY 5 Binatone
Go to page of 28
1.
2.
3.
2. Installation 4 1. Locating the Base unit The Base unit should be placed on a level surface, in a position where: the telephone line cable will reach your telephone line socket or extension socket. it is not close to a sink, bath or shower , or anywhere else where it might get wet.
3. Desk/W all mount installation 5 T o place the SpeakEasy 5 on a desk, connect the stand to the bottom of the phone in the slots near the ringer cover as shown below . Desk Mount Insert the rigid clips of the stand into the slots on the bottom of the phone (near the ringer cover).
Desk/W all mount continue ... Insert the rigid clips of the stand into the slots on the bottom of the phone (near the battery cover). Press down firmly until the flexible clips clicks into place. T o remove the stand , ( 1 ) pinch the flexible clips, ( 2 ) pull back the stand, and then (3) slide up and forward as shown below .
7 4. Setting up your phone The following section details how to set up your telephone. Press the MENU button to enter the Options menu and then use the UP or DOWN buttons to cycle through the followin.
Setting up continue... 8 2 Press UP or DOWN button until the display shows SET TIME/DATE SET TIME/DATE SET TIME/DATE SET TIME/DATE SET TIME/DATE . 3 Press MENU button to confirm. Ö The ‘year ’ icon will be blinking. 4 Press UP or DOWN button to set the year .
Setting up continue... 9 3 Press MENU button to confirm. 4 Press UP or DOWN button to select your comfortable display viewing level (1~ 6 ). The default setting is 3. 5 Press MENU button to confirm the LCD CONTRAST setting. 6 Continue with programming, or press RECALL button to return to standby mode.
10 5. T elephone Operation Ringer volume The Ringer High-Low switch located at the back of the Base unit allows you to adjust the volume of the ringer . - High volume - Low volume 1 Lift the handset, or press SPEAKERPHONE button on the Base unit. Ö Check for dial tone.
T elephone operation continue... 11 During a phone conversation through the Handset, press the SPEAKERPHONE button to speak hands-free. Replace the Handset on the Base unit cradle. While in speakerphone mode, lift the Handset to enable a private conversation.
1 With the phone on standby mode, press STORE button. 2 Enter the telephone number , up to 22 digits. Ö The memory cannot exceed 22 digits during programming and if exceeded, the memory will not store the number . 3 Press the desired memory location button (M1 , M2 , or M3) button.
13 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 6. Outgoing call record The telephone remembers the last 10 outgoing calls .
14 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 1 When viewing the Outgoing call records, press UP or DOWN button to find the record you wish to store.
15 7. Phonebook function The Phonebook can store up to 22 names (maximum of 15 characters) and telephone numbers (maximum of 20 digits) in the Memor y .
Phonebook function continue... 16 4 Input the name, maximum of 15 characters using keypad buttons 2/ ABC to 9/ WXYZ . Ö Refer to the table below to get the following characters. 5 Press PHONEBOOK button to confirm the name. Ö The display shows the cursor blinking on the number field.
Phonebook function continue... 17 1 When viewing the Phonebook records, press UP or DOWN button to find the record you wish to edit. 2 When the record is displayed, press PHONEBOOK button. Ö The display shows the cursor blinking on the first character of the name field.
18 8. Caller Displa y operation VERY IMPORT ANT : The Caller Display feature of this product requires a subscription to Caller Display service from your telephone company . If you subscribe to this feature from your local telephone company , you can see the phone number of the person calling you before you answer .
19 Caller Displa y operation continue ... 1 With the phone on standby mode, press UP or DOWN button. Ö The display shows the most recent record. If there are no Caller Display records, the display will show NO CALLS NO CALLS NO CALLS NO CALLS NO CALLS .
20 Caller Displa y operation continue ... During the Caller Display review: 1 Press and hold CANCEL button. Ö The display prompts DEL ALL CALLS? DEL ALL CALLS? DEL ALL CALLS? DEL ALL CALLS? DEL ALL CALLS? 2 Press CANCEL button again to confirm. Ö The display automatically returns to standby mode.
21 Caller Displa y operation continue ... When you subscribe to Call W aiting ser vice from your local telephone company , this telephone will display the number of the second caller while you are having a conversation with the first caller .
22 9. Operational notes Electrical safety DON’T let the Base unit get wet . Electrical equipment can cause serious injury if used while you are wet or standing in water .
23 10. T r oubleshooting The SpeakEasy 5 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself - you could make the problem worse and invalidate the Guarantee. AL WAYS check you have followed the steps listed in Section 2 to first that: install and set up your SpeakEasy 5.
T roubleshooting contin ue ... Be sure to wait until the second ring before answering. “ERROR message ERROR ERROR ERROR ERROR ERROR appears in the LCD screen if the unit detects is displayed.” anything other than valid Caller Display information during the silent period after the first ring.
T roubleshooting contin ue ... If the fault persists … Disconnect all other instruments connected to the same line as the SpeakEasy 5 and see whether you can make a call. Disconnect the Base unit from the telephone line and plug a different phone into the master telephone socket.
26 11. Guarantee and ser vice The Binatone SpeakEasy 5 is guaranteed for 12 months from the date of purchase shown on your sales receipt. The Guarantee does not cover damage by misuse or negligence, or by excessive voltages - for example, faults on the telephone line, or lightning.
27 12. T echnical details Standard Corded T elephone Caller Display with Speakerphone T emperature range Operating 0 ºC to 40 ºC Storage -20 ºC to 60 ºC Port specification The port (connected to the telephone line) is a TNV3 port with respect to EN41003.
Connection and conditions for use Y ou can connect your SpeakEasy 5 to a direct exchange line (DEL) - a line connected to a local exchange, with its own phone number; to an extension socket connected to a DEL; or to an extension on an approved compatible PBX.
An important point after buying a device Binatone SPEAKEASY 5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Binatone SPEAKEASY 5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Binatone SPEAKEASY 5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Binatone SPEAKEASY 5 you will learn all the available features of the product, as well as information on its operation. The information that you get Binatone SPEAKEASY 5 will certainly help you make a decision on the purchase.
If you already are a holder of Binatone SPEAKEASY 5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Binatone SPEAKEASY 5.
However, one of the most important roles played by the user manual is to help in solving problems with Binatone SPEAKEASY 5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Binatone SPEAKEASY 5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
