Instruction/ maintenance manual of the product MBP 20 Binatone
Go to page of 23
User’s Guide MBP20 Baby Monitor The features described in this user's guide are subject to modifications without prior notice..
Welcome... to your new Motoro la Baby Monitor! Thank you for purchasing the MBP20. Now you can see and hear your baby sleepi ng in the other r oom or you can monitor your older childr en in their play room. Please retain your original dated sales receipt for your records.
Overview of your Parent unit 1 LCD Display 2 Link Indicator On when the parent unit is powered on and linked to the baby unit. Flashes when the parent unit is out of ran ge from baby unit. Off when the parent unit is powered off. 7 8 9 6 5 4 3 2 1 3 UP / V olume + In idle mode: Press to increase the speaker volume.
Parent Unit Display Menu Structure of Parent Unit 9 Chargi ng Indica tor On steadily when in charging mode. Flashes when low battery is detected. NOTE Off even if connected with power adapter but without battery pack installed. Icons Behaviors Description Indicates the signal strength between ba by unit and parent unit.
Overview of your Baby u nit 6 5 4 8 9 2 7 3 1 1 Infrared Light 2C a m e r a 3 Power Indicator On when the baby unit is switched on. Off when the baby unit is switched off. 4 UP / Volume + Press to increase the speaker volume. 5P o w e r Press and hold to power on/off the baby u nit.
Important guidelines for installin g our Baby Monitor • T o use your baby unit and parent unit together , you must be able to establish a radio link between the m, and the range will be affected by env ironmental conditions.
7 1. SAFETY INS TRUCTIONS .................... ........... .... 8 2. GETTING S TARTED ........... .......... ............. .......... 9 2.1 Baby unit power supply ....................................... 9 2.2 Parent unit battery installation .........
8 SAFETY INSTRUCTIONS 1. SAFETY INSTRUCTIONS WARNING: STRANGULATION HAZARD - Keep th e adapter cord out of baby's reach. NEVER place the baby monitor or its cord within the cot. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters.
GETTING STARTED 9 2. GETTING ST AR TE D 2.1 Baby unit power supply 1. Insert the power adapter with smaller pin plug into the side of the baby unit, as shown. 2. Connect the other end of the power ad apter to the power outlet. NOTE Only use the provided power adapter.
10 GETTING START ED 3. Insert the supplied battery pack, and fit the battery pack into the compartment. 4. Reattach the battery compartment cover , and reinstall the belt clip (refer to section 2.3). 5. Insert the power adapter with bigger pin plug into the side of the parent unit.
USING YOUR BABY MONITOR 11 3. USING YOUR BABY MONITOR Please read these instructi ons carefully, and be reminded that this baby monitor is just intended as an aid. It is not a substitute for responsible, correct parental supervision. 3.1 Power on/off the parent unit 1.
12 USING YOUR BABY MONITOR 3.4.1 Adjust talk ba ck volume The baby unit has 5 volume levels from Level 1 to Level 5. During Talk Back, press > or < on the baby unit to increase or decrease the volume respectively. NOTE The lullaby will stop playi ng back when talk back is activated.
Parent unit set tings 13 NOTE The parent unit still carries on audio monitoring even if the video capture is turned of f. To switch the video feed from the curren t monitoring parent unit to the other parent unit w hich is not in video monitoring mode: 1.
14 Parent unit sett ings 4.2.2 Set the timer 1. Repeat steps 1 to 3 in section 4.2.1. 2. Press + or - to select SET TIMER . 3. Press 1 and then set the hour and minute continuously . 4. Press 1 to confirm. NOTE Once the time reaches, the unit will emit alert beep and show 00:00 counter on the screen.
DISPOSAL OF THE DEVICE (ENVIRONMENT) 15 4.6 Reset You can restore all the adjust able settings ba ck to their original factory settings. 1. Press 1 to access main menu. 2. Press + or - to select RESET . 3. Press 1 and display will show CONF IRM? . 4. Press 1 to confirm.
16 CLEANING 6. CLEANING Clean MBP20 with a slightly damp cloth or with an anti- static cloth. Never use cleaning agents or abrasive solvents. Cleaning and ca re • Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product w hich is not covered by the warranty .
TROUBLESHOOT ING 17 • Battery pack in parent unit may be running low . Connect the parent unit to the mains power with the supplied power adaptor for recharging. Cannot view the vide o image of baby fr om the par e n t un i t • Video feed maybe turned off.
18 GENERAL INFORMATION 8. GENERAL INFORMA TION If your product is not working properly... 1. Read this User's Guide. 2. Visit our website: www .motorola.com 3. Contact Cust omer Service at UK 0845 218 0890 ROI 08187 62092 To order a replacement battery pack for parent u nit, contact customer service.
GENERAL INFORMATION 19 ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIME D BY LAW. Some jurisdictions do not allo w the limitation or exclusio n of incidental or consequential dam age s, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you.
20 GENERAL INFORMATION Unauthorized Service or Modifica tion. Defects or damages resulting from serv ice, testing, adjustment, installation, maintenance, altera tion, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage.
TECHNICAL SPECIFICATIONS 21 9. TECHNICAL SPECIFICA TIONS Baby Unit: Parent Unit : Frequency 1881.792 MHz - 1897.344 MHz Channels 10 Operating temperature 5 o C - 45 o C Image sensor Colour CMOS 30M Pixels Lens f 3.
22 EC DECLARATION OF CONFORMITY BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license.
An important point after buying a device Binatone MBP 20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Binatone MBP 20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Binatone MBP 20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Binatone MBP 20 you will learn all the available features of the product, as well as information on its operation. The information that you get Binatone MBP 20 will certainly help you make a decision on the purchase.
If you already are a holder of Binatone MBP 20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Binatone MBP 20.
However, one of the most important roles played by the user manual is to help in solving problems with Binatone MBP 20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Binatone MBP 20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
