Instruction/ maintenance manual of the product PoE-10 ZyXEL Communications
Go to page of 10
PoE-10 Single-port Power over Ethernet Injector User’s Guide February 2004.
PoE-10 Single-port Power over Ethernet Injector 1 T able of Content s Copyright ......................................................................................................................... 2 Discla imer ...................................
PoE-10 Single-port Power over Ethernet Injector 2 Copyright Copyright © 2004 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, tra.
PoE-10 Single-port Power over Ethernet Injector 3 page. 3. Select the certification you wish to view from this page. Information for Canadian Users The Industry Canada label identifies certified equipm ent. This certification means that the equipment meets certain telecommunications network protective operation and safety requirements.
PoE-10 Single-port Power over Ethernet Injector 4 Syntax Conventions in this Guide The PoE-10 Single-port Power over Etherne t Injector may be called the “PoE-10” or “the po wer injector” in this guide. Customer Support Please have the following information r eady when you contact customer support: • Product model and serial number.
PoE-10 Single-port Power over Ethernet Injector 5 SUPPORT E-MAIL TELEPHONE 1 WEB SITE METHOD LOCATION SALES E-MAIL FAX 1 FTP SITE REGULAR MAIL support@zyxel.co m.tw +886-3-578-39 42 www.zyx el.com www.europe.zyxel.com ftp.zyx el.com Worldwide sales@zyx el.
PoE-10 Single-port Power over Ethernet Injector 6 About Your PoE-10 The PoE-10 Single-port Power over Ethern et injector is a one-po rt power injector, designed for use with 10/1 00 BaseT Ethernet networks. The PoE-10 inject s DC power through the unused twisted- wires ( pairs 4/5 a nd 7/8) of a standard 8-pin CAT 5 cable.
PoE-10 Single-port Power over Ethernet Injector 7 are located on the rear panel. LAN 10/100M Ports The PoE-10 has two LAN ports. The PWR&DATA port delivers power to your PoE-enabled device. Use a straight-t hrough Ethernet cabl e to connect the PWR&DATA port to your PoE-enabled device.
PoE-10 Single-port Power over Ethernet Injector 8 Specifications Compatibility Compatible with certain ZyXEL PoE-enabled devices. 2 Ports 1 DA TA RJ-45 Ethernet port 1 PWR&DATA PoE injector RJ-45 Ethernet port LEDs 1: PWR 1: LNK Power Output 15.
PoE-10 Single-port Power over Ethernet Injector 9 Power Over Ethernet Injector RJ-45 Port Pin Assignments PIN NO RJ-45 SIGNAL ASSIGNMENT 1 Output Transmit Data + 2 Output Transmit Data - 3 Receive Dat.
An important point after buying a device ZyXEL Communications PoE-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications PoE-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications PoE-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications PoE-10 you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications PoE-10 will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications PoE-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications PoE-10.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications PoE-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications PoE-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
