Instruction/ maintenance manual of the product P-791R v2 ZyXEL Communications
Go to page of 8
Copyright © 2007. All rights reserved. P-791R v2 G .SHDSL.bis Router Quick S tart Guide V ersion 1.00 4/2007 Edition 1 DEFAULT LOGIN IP Address http://1 92 .
P-791R v2 Quick Start Guide 2 Overview The P-791R v2 is a G .SHDSL.bis Router prov iding high-speed LAN-to -LAN connection and Internet access over the telephon e line. Y ou ca n use your P-79 1R v2 for ei ther IP routing or bridging depend ing on your ISP (Int erne t Service Provider) configuration.
P-791R v2 Quick Start Guide 3 Look at the LEDs •T h e POWER LED blinks green while your P-791R v2 starts up and stays on when it is ready . •T h e DSL LED bli nks while the P-791R v2 i s trying to establish a connection w ith the ISP and stays on when the connection is established.
P-791R v2 Quick Start Guide 4 2 Enter the password user t o g o d i r e c t l y to the St a tus screen. 3 See the User ’s Guide for fi eld descriptions of the Stat us screen. 3 Internet Connection Setup: Automatic Use this section to have your P-7 91R v2 aut omatically detect and set up your Internet connection.
P-791R v2 Quick Start Guide 5 3 If you do not see the connection test screen, or th e connection test is not successful , follow the instructions in the screen below , or check you r connections and re start the P- 791R v2. If you still cannot access the Internet, follow the steps in section 4 .
P-791R v2 Quick Start Guide 6 4 Click Go to Wizard setup , and then click Apply . 5 Click Internet Setup . 6 Follow the directi ons in this wizard to set up your Internet connection. After you set up the Internet connection, test your Internet connection by visiti ng another web site (for example, http:// www .
P-791R v2 Quick Start Guide 7 V Check the LEDs on the front panel. If they are differ ent from what is described in section 1, make sure the con nections are correct. (See section 1.) If the LEDs are still different, turn off the device, wait a few seconds, and turn it on again.
P-791R v2 Quick Start Guide 8.
An important point after buying a device ZyXEL Communications P-791R v2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications P-791R v2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications P-791R v2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications P-791R v2 you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications P-791R v2 will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications P-791R v2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications P-791R v2.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications P-791R v2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications P-791R v2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
