Instruction/ maintenance manual of the product ZBOX MN321 Zotac
Go to page of 16
1 ZOT AC ZBOX ZO T A C ZBO X User’ s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or.
2 ZOT AC ZBOX T a ble of Contents Product Specications -------------------------------------------------------------------------- 3 Safety information ----------------------------------------------.
3 ZOT AC ZBOX Product Specications q Microprocessor support v Intel ® 2957U (Dual-core, 1.40 GHz) q Operating systems: v Supports Windows 7 32-bit/64-bit, Windows 8 32-bit/64-bit and Windows 8.1 32-bit/64-bit q System Memory support v 2 204-pin SO-DIMMs DDR3L-1600/1333 (1.
4 ZOT AC ZBOX Safety inf or mation Y our ZOT AC ZBOX is designed and tested to meet the latest standards of safety for infor - mation technology equipment. However , to ensure your safety , it is important that you read the following safety instructions.
5 ZOT AC ZBOX W elcome Congratulations on your purchase of the ZOT AC ZBOX. The following illustration displays the package contents of your new ZOT AC ZBOX.
6 ZOT AC ZBOX Getting to know y our ZOT A C ZBO X F r ont view 1 2 3 4 5 6 7 Refer to the diagram below to identify the components on this side of the system 1. Headphone/Audio Out jack The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplied speakers or headphones.
7 ZOT AC ZBOX Rear view Refer to the diagram below to identify the components on this side of the system. 1. WiFi antenna connector The WiFi antenna connector supports WiFi antenna module. 2. USB 3.0 ports The USB 3.0 port supports the SuperSpeed USB 3.
8 ZOT AC ZBOX How to disable the ring LED indica tor 1. T urn on the ZBOX mini-PC and press <Delete> to enter the BIOS SETUP UTILITY. 2. Use the arrow keys to navigate to the Power menu and select Logo Indicator . 3. Press <Enter> and select T urn off .
9 ZOT AC ZBOX Installing Har dware inside ZOT AC ZBO X Before installing hardware, please follow the instructions below to remove the cover of your ZOT AC ZBOX. 1. Unscrew . 2. Gently remove the cover as the image below . Installing a memor y module 1.
10 ZOT AC ZBOX 2. Gently press down on the memory module until it locks into place by the arms of the memory slot. Remo ving the memor y module 1. Locate the SO-DIMM memory slot and gently press the two arms securing the memory module outwards, as shown in the image below , to release the memory module.
11 ZOT AC ZBOX Installing a har d disk 1. Locate the hard disk bracket and remove the thumb screw . 2. Lift up on the plastic ap. 3. Insert a 2.5-inch SA T A hard disk into the bracket at a 45 degree angle and gently slide into the connector . 4. Lower the plastic ap and reinstall thumb screw .
12 ZOT AC ZBOX Setting up your ZO T AC ZBO X Y ou need to connect peripherals before using your ZOT AC ZBOX. 1. Connecting a WiFi antenna module Connect a WiFi antenna module to the WiFi antenna connector .
13 ZOT AC ZBOX P ositioning your ZO T AC ZBO X Do not position the ZOT AC ZBOX where the ventilation holes are covered. T o guarantee proper use, leave 4 inches (10 cm) spacing in front of the ventilation holes.
14 ZOT AC ZBOX Installing driv er s and softwar e Installing an operating system The ZOT AC ZBOX does not ship with an operating system preinstalled. The user must install the operating system before the ZOT AC ZBOX can be used. The following operating systems are supported: • Windows 7 • Windows 8 • Windows 8.
15 ZOT AC ZBOX Note: If you want to use USB charger for iPhone/iPad, please install the driver at X:UtilitySoftwareUsb Chargersetup.exe (X: your driver disk letter). Each driver must be installed individually to ensure proper operation of the ZOT AC ZBOX.
16 ZOT AC ZBOX Using a dynamic IP (PPPoE connection) 1. Repeat Step 1-3 in the previous section. 2. Select “Obtain an IP address automatically” and click “OK”. 3. Click “Create a new connection” to start the NEW Connection Wizard. 4. Click “Next”.
An important point after buying a device Zotac ZBOX MN321 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zotac ZBOX MN321 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zotac ZBOX MN321 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zotac ZBOX MN321 you will learn all the available features of the product, as well as information on its operation. The information that you get Zotac ZBOX MN321 will certainly help you make a decision on the purchase.
If you already are a holder of Zotac ZBOX MN321, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zotac ZBOX MN321.
However, one of the most important roles played by the user manual is to help in solving problems with Zotac ZBOX MN321. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zotac ZBOX MN321 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
