Instruction/ maintenance manual of the product None Zoom
Go to page of 32
Quick Start ADSL USB Modem This Quick Start contains all the informati on you should need to install and use your Zoom ADSL USB modem. Instructions for both Windows and Macintosh computers are included. Important! Before You Begin Before you ins tall your ADSL modem, you must have AD SL service enabled o n your telephone li ne.
2 ADSL USB Mo d e m Q u ick Start You Will Also Need • A Windows 98/98SE/Me/2000/XP or Macintosh computer equipped with a USB port. • An ADSL-enabled telephone wall jack to plug the modem into.
3 Quick Start If you have a Macintosh computer, please go to page 15. If you have a Windows computer, please continue below. Step 1: Installing the Software and Hardware for Windows 1 1 1 1 Make sure that your compute r is on. 2 2 2 2 Insert the supplied CD into the CD-ROM drive of your computer.
4 ADSL USB Mo d e m Q u ick Start 6 6 6 6 In the Coun try Selection dialog box, select your count ry and click Next . If your country is not li sted, select Other . Depending on your selection, one o f the following will happen: ! If your country only has one type of ADSL se rvice, the Start Copying Files dialog box opens.
5 7 7 7 7 If your country has more than one type of ADS L service, the Service Provider Selection dialog box opens. Select your service. If you do not know which service to select, please contact your ADSL service provider to get the information.
6 ADSL USB Mo d e m Q u ick Start 8 8 8 8 If you selected Other in Step 6, the Internet Settings Selection dialog box opens. Enter the VPI and VCI numbers in their co rresponding boxes, select the Encapsulation Type f rom the drop-dow n list, and click Next .
7 10 10 10 10 When the installation is complete, click Finish to restart your computer. As your computer restarts, do the following: a a a a Click OK when you are prompted to connect the USB hardware, and then plug one end of t he USB cable into the modem’ s USB port an d the other end into your computer’s USB port.
8 ADSL USB Mo d e m Q u ick Start 11 11 11 11 If you want to plug a phone in through the modem, you can do so by plugging it into t he modem’s jack labeled PHONE . If you do this, you should use a filter for that phone as discussed below. We HIGHLY RECOMMEND tha t you install a fi lter for EVERY phone and fax that is sharing the ADSL phone line.
9 Step 2: Configuring Your We b Browser The software that you use to make an Internet connect ion must be set for a network con nection , not a dial-up connection . This section includes instructions for recent vers ions of two popular Web browsers: Inter net Explorer Version 5.
10 ADSL USB Mod em Quick St art 2 2 2 2 On the Internet Properties dialog box, select the Connections tab, then click the Se tup button. 3 3 3 3 The setup process will proceed differently, depending on your operating system. The following table details the process for your Windows computer.
11 4 4 4 4 If you accessed Internet Explorer’s settings from the Control Panel (as explained in the “Tip” following step 1), th e Control Panel window will s till be open. Close it before continuing. Congratula tions! You have config ured Internet Explorer .
12 ADSL USB Mod em Quick St art 4 4 4 4 Select Direct connection to the Internet , then click OK . Congratula tions! You have config ured Netscape Navigator.
13 2 2 2 2 Enter your User name and a Password , then click Dial or Connect , depending on your o perating system. Your service provider should have given you a Use r ID or Username (usually your email address or the characters preceding t he @ sign in your email address) and a Passwo rd.
14 ADSL USB Mod em Quick St art About the DSL Monitor Your modem includes a DSL monitor application. Thi s application lets you check the status of your Internet connect ion. Double-click the triangular ico n on your computer’s system tray at the bottom of your de sktop to open the application.
15 Macintosh Quick Start • Mac OS X users, follow the steps below. • Mac OS 9 users, go to page 18. Mac OS X 1 1 1 1 Launch the CD and drag the Zoom ADS L USB OS X Installer onto the desktop. Dou ble-click the ADI USB ADSL OSX icon. 2 2 2 2 Enter your Macintosh User Name and Password when the Authenticate box opens.
16 ADSL USB Mod em Quick St art 6 6 6 6 Double-click the triangular icon on your computer’s desktop to open the ADI Monitor application. 7 7 7 7 Click the Configura tion tab, the n enter the VPI and.
17 9 9 9 9 What happens next depend s on the type of encapsulation you selected above. ! Bridged or Routed: No additio nal configuration is usually required. Go to Step 10. ! PPP: —You must change the highlighted entry in the Show pulldown list from Internal Modem to Ethernet Adaptor .
18 ADSL USB Mod em Quick St art Mac OS 9 1 1 1 1 Launch the CD and double-click the ADI USB ADSL OS9 Installer . 2 2 2 2 Double-click the ADI USB ADSL Classic applicatio n, and then click the Instal l button. 3 3 3 3 Once the software installation is complete, you will be prompted to restart your computer.
19 6 6 6 6 Click the Configura tion tab, the n enter the VPI and VCI numbers in the corre sponding ATM Channel VPI and ATM Channel VPI boxes, select the Enca psul at ion Type from the drop-down list, and click Save C hanges . Do not change any other fields.
20 ADSL USB Mod em Quick St art Connection T roubleshooting Tips The following are some problems you may experience and some possible solution s to remedy the situati on. Problem My modem’s LINK light continually bli nks and does not stay solidly lit.
21 • Verify that your ADSL service provider’s ADSL connection is functioning properly. (Place a call to your ISP’s customer support depa rtment to verify thi s.
22 ADSL USB Mod em Quick St art Window s 2000 1 1 1 1 Open the Internet Pro tocol (TCP /IP ) Propert ies dialog box. a a a a From the desk top, click the St art button, point to Settings , then Network and Dial-up C onnections . b b b b Right-click the Local Area Connection icon, and select Pro perties .
23 Windows 98/Me 1 1 1 1 Open the Internet Pro tocol (TCP /IP ) Propert ies dialog box. a a a a From the desk top, click the Star t button, point to Settings , then C ontrol Pane l . b b b b Double-click the Netw ork ico n to display the Netwo rk dialog box.
24 ADSL USB Mod em Quick St art How T o Determine Y ou r Service Provider ’s Settings if Y ou Do Not Know Them This section is o nly for those Window s users w ho have more than one ADSL service listed in the S ervice Provide r Selectio n dialog box on page 5, and who do not have their service’s settings.
25 3 3 3 3 Refer to the tables beginni ng on page 27 and find you r service provider. You have already tried one or m ore entries, so now you should try the next entries in order until you are successful or you run out of settings to try.
26 ADSL USB Mod em Quick St art If Y ou Need Help Zoom has many Technical Support services available to its customers. You can access t hese services in a variety of ways : • Windows users: Insert t.
27 Service Provider Settings T a bles These tables are for customers whose service providers do not supply them with the ADSL settings to connect to the Internet. Many ADSL provide rs use different settings depe nding on the region in which they are operating, which is why there may be more than one setting f or your service provide r.
28 ADSL USB Mod em Quick St art Table B: Countries Other Than The USA Service Provider or Country VPI VCI Encapsulation Australia- Telstra 8 35 PPPoA LLC Argentina 1 33 PPPoA VC-MUX Belgium-A DSL Of f.
29 Table B (Continued): Countri es Other Than The USA Service Provider or Country VPI VCI Encapsulation Spain-Albura , Tiscali 1 32 PPPoA VC-MUX Spain-Colt Tele com, O l a Inte rnet 0 35 PPPoA VC-MUX .
30 ADSL USB Mod em Quick St art R egulatory Info rmation U.S. FCC Part 68 Statement This equipm e nt c omplies with Part 68 of the FCC rules and the req u irements adopted by the ACTA. The unit bears a label on the back which contains among other information a product id entifier in the form at US:AAAEQ##TXXXX.
31 • Reorient or relocate the receiving antenna. • Increase the s eparation between the equi pment and receiver . • Connect the equipment into an o utlet on a circuit different from that to which th e receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
3364-B 27338 ©2004.
An important point after buying a device Zoom None (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zoom None yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zoom None - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zoom None you will learn all the available features of the product, as well as information on its operation. The information that you get Zoom None will certainly help you make a decision on the purchase.
If you already are a holder of Zoom None, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zoom None.
However, one of the most important roles played by the user manual is to help in solving problems with Zoom None. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zoom None along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
