Instruction/ maintenance manual of the product ZX222 Znyx Networks
Go to page of 9
NetBlaster ZX222 User ’ s Guide Fast Ethernet Adapter for PCI Mezzanine Connector (PMC).
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 2 ZNYX Networks 48501 Warm Springs Blvd., Suite 107 Fremont, CA 94539 USA Telephone: (510) 249 - 0800 or (800) 724 - 0911 Fax: (510) 656 - 2460 Email: sales@znyx.com support@znyx.
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 3 Welcome! Thank you for choosing the ZNYX Networks NetBlaster embedded PCI Mezz anine Card (PMC) Fast Ethernet Adapter. Your adapter is designed to provide a lifetime of superior service in your system with PMC slots.
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 4 Hard ware Installation Below are the steps necessary to install a NetBlaster adapter into a standard, PMC compliant system. The following are detailed instructions for the hardware installation procedure.
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 5 4. Insert the ZNYX Networks adapter into the PMC slot. Insert the bezel of the ZNYX Networks adapter into the PMC cutout on the front panel of the motherboard or carrier card.
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 6 Testing ZX222 Adapters in DOS 1. Run the diagnostic program that came with your adapter to see if your ad apter has been properly configured. Run DIAG222.EXE off your diskette by entering: >DIAG222 LIST 2.
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 7 LED illuminates during activity. Note: In most cases, the driver must be properly loaded and configured to bring up the link. The link LED is off if there is no link established.
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 8 Appendix A: Legal Notic es and Certification CLASS 1 LASER Product: Complies with 21 CFR 1040.
ZNYX Networks NetBlaster ZX222 PMC Fast Ethernet Adapter · User ’ s Guide Page 9 Warranty ZNYX Networks warrants to the original purchaser of any ZNYX Networks NetBlaster PMC Fast Et hernet adapter.
An important point after buying a device Znyx Networks ZX222 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Znyx Networks ZX222 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Znyx Networks ZX222 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Znyx Networks ZX222 you will learn all the available features of the product, as well as information on its operation. The information that you get Znyx Networks ZX222 will certainly help you make a decision on the purchase.
If you already are a holder of Znyx Networks ZX222, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Znyx Networks ZX222.
However, one of the most important roles played by the user manual is to help in solving problems with Znyx Networks ZX222. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Znyx Networks ZX222 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
