Instruction/ maintenance manual of the product ES1-E30AS Zephyr
Go to page of 13
HB0064 RANGE HOOD INST ALLA TION INSTR UCTIONS - USE AND CARE INTENDED FOR DOMESTIC COOKING ONL Y INST ALLER: LEA VE THIS MANU AL WITH HOMEO WNER. HOMEO WNER: CLEANING AND OPERA TION INFORMA TION ON P A GES 9 AND 10.
W ARNING W ARNING - 2 - T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJUR Y TO PERSONS, OBSER VE THE FOLLO WING: 1. Use this unit only in the manner intended by the manuf acturer. If you hav e questions, contact the manuf acturer at the address or telephone number listed in the warr anty .
Please take note this manual uses the f ollowing symbols to emphasize particular information: NO TE: Indicates supplementar y inf ormation needed to fully complete an instr uction. ABOUT THIS MANU AL T OOLS NEEDED T O INST ALL THE RANGE HOOD CA UTION Denotes an instruction which, if not followed, may severel y damage the unit and/or its components.
1. INST ALL DUCTW ORK Plan where and how the ductwork will be installed. Install proper-sized ductwork, elbow(s) and roof or w all cap f or the type of blo wer you are installing. If using 6’ ’ (150 mm) round ducts, use a transition. Use 2’ ’ (50 mm) duct tape to seal duct joints.
NO TE: If the bottom of the cupboard is recessed, attach wood strips (not included), as shown beside, in order to properly install the range hood under the cabinet.
NO TE: If this hood replaces another one, please note that the location of the air e xhaust can vary from one manuf acturer to another . 5. INST ALL THE AD APTER/D AMPER Fold do wn the f oldable flange ( C ) of the adapter/damper . This flange must be at 90° from the remaining flanges.
- 7 - 6. INST ALL THE HOOD Run power cab le to installation location. Place the hood at its location. Using a pen, mar k the position of the screws (smaller part of the embossed ke yholes). Remov e the hood and install f our 1/2” double thread scre ws at sides locations ( A ), leaving a 1/8” gap.
- 8 - 8. REINST ALL BO TT OM P ANEL AND FIL TERS Reinstall the bottom panel, using the retaining screw pre viously removed in step 4 plus 4 others from par ts bag. Refer to illustr ation beside. Then, reinstall filters. HO0097 W ARNING Risk of electrical shock.
- 9 - This range hood must use compact fluorescent lamps (120 V , 13 W , PLC13, 2700 K with G24q-1 base) (included). NO TE: The r ange hood is shipped with both fluorescent lamps pack ed behind the light diffuser . 1. T o access fluorescent lamps, remov e the light diffuser b y pushing on its both tabs and pulling it down.
- 10 - T o remov e the blo wer wheel, first take off its intak e ring. Then remo ve the blo wer wheel by pulling it do wn smoothly . HD0156 D Do: • Regularly wash surfaces with clean cloth or rag soaked with w arm water and mild soap or liquid dish detergent.
- 11 - 11. OPERA TION 12. REPLA CEMENT P ARTS Alwa ys turn on the hood before begining cooking in order to estab lish an air flow in the kitchen. Let the blower run f or a f ew minutes to clear the air after turning off the range. M ECHANICAL P USH -B UTTON C ONTROL A.
www .zeph yronline.com.
www.zephyronline.com Warranty One Y ear Service Repair W arranty: F or one year from date of original purc hase, we will provide free of charge, service labor to repair any failed parts or components due to manufacturing defects.
An important point after buying a device Zephyr ES1-E30AS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zephyr ES1-E30AS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zephyr ES1-E30AS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zephyr ES1-E30AS you will learn all the available features of the product, as well as information on its operation. The information that you get Zephyr ES1-E30AS will certainly help you make a decision on the purchase.
If you already are a holder of Zephyr ES1-E30AS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zephyr ES1-E30AS.
However, one of the most important roles played by the user manual is to help in solving problems with Zephyr ES1-E30AS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zephyr ES1-E30AS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
