Instruction/ maintenance manual of the product AK088xAS Zephyr
Go to page of 2
*Dimension does not include 3/8” wide flange around liner. **The inside depth shown in the table above assumes a minimum cabinet backboard thickness of 3/8”.
CAUTION: Before installing, remove any protective film from all parts. The custom hood liner must be installed before the power pack unit. For installation into shallow cabinets (20- 1/2 ”t o2 1 - 1/2 “ inside depth) the power pack must be installed before the liner front panel section.
An important point after buying a device Zephyr AK088xAS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zephyr AK088xAS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zephyr AK088xAS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zephyr AK088xAS you will learn all the available features of the product, as well as information on its operation. The information that you get Zephyr AK088xAS will certainly help you make a decision on the purchase.
If you already are a holder of Zephyr AK088xAS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zephyr AK088xAS.
However, one of the most important roles played by the user manual is to help in solving problems with Zephyr AK088xAS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zephyr AK088xAS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
