Instruction/ maintenance manual of the product SRTZ2601F Zenoah
Go to page of 15
GB-1 G B SRTZ2601F SRTZ2601F G B OWNER’S MANUAL SHORT REACH TRIMMER 848F4293A1 (705).
GB-2 SRTZ2601F EC DECLARA TION OF COMFORMITY We, ZENOAH CO., L TD. 1-9, Minamidai, Kawagoe, Saitama, Japan declare in sole responsibility that the following products referred to in this declaration co.
GB-3 G B SRTZ2601F Information This machine is equipped with an Overload Cancellation Mechanism. When the cutting blades have got into metal wires or twigs difficult to cut, the mechanism works as a shock absorber , and protects the gears and the blades from severe reaction which could give damage to those parts.
GB-4 SRTZ2601F Model SRTZ2601F Overall size (LxWxH) mm 1734 x 338 x 254 Dry weight * kg 6.4 Engine T ype Air -cooled 2-stroke gasoline Model Zenoah GZ25N Max output rpm 1.2Hp (0.9kW) at 7500min -1 Idle speed rpm 3000 ± 200min -1 Displacement cm 3 25.
GB-5 G B SRTZ2601F 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise.
GB-6 SRTZ2601F W ARNING Never place the throttle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops moving when the throttle is moved fully back to its original position.
GB-7 G B SRTZ2601F • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W ar n adults to keep pets and children away fr om the area.
GB-8 SRTZ2601F AT T ACHING THE TRIMMING MECHANISM W ARNING The blade has very sharp edges. Be sure to use pro- tective gloves and protective cover whenever han- dling it. 1. Remove the cap on the end of the main pipe. 2. Remove the screw and the fastening bolt scr ewed into the end of the trimming mechanism.
GB-9 G B SRTZ2601F ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion.
GB-10 SRTZ2601F ST ARTING ENGINE 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects as it will start moving upon star ting of the engine.
GB-11 G B SRTZ2601F 8. Operation W ARNING • This product is equipped with extr emely sharp blades, and when used improperly these blades can be ex- tremely danger ous, and improper handling can cause accidents which may in turn lead to serious injur y or death.
GB-12 SRTZ2601F 9. Maintenance Every Every Ever y 25 50 100 System/components Procedur e Before hours hours hours Note use after after after fuel leaks, fuel spillage wipe out ✔ fuel tank, air filte.
GB-13 G B SRTZ2601F SP ARK PLUG W ARNING • Do not touch the spark plug with your bare hands immediately after operation, as there is the risk of burns due to high temperature. • After every 50 hours of operation, detach the spark plug and remove dirt from the electr odes with a wire brush or similar .
GB-14 SRTZ2601F MUFFLER W ARNING • Inspect periodically , the muffler for loose fasten- ers, any damage or corrosion. If any sign of ex- haust leakage is found, stop using the machine and have it repaired immediately . • Note that failing to do so may result in the engine catching on fire.
GB-15 G B SRTZ2601F Limited warranty Should any failure occur on the pr oduct under normal oper - ating conditions within the applicable warranty period, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer .
An important point after buying a device Zenoah SRTZ2601F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah SRTZ2601F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah SRTZ2601F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah SRTZ2601F you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah SRTZ2601F will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah SRTZ2601F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah SRTZ2601F.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah SRTZ2601F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah SRTZ2601F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
