Instruction/ maintenance manual of the product LRTZ2610 Zenoah
Go to page of 15
GB-1 G B SRTZ2610/SR TZ2610F/LRTZ2610 SR TZ2610 SR TZ2610F LR TZ2610 G B OWNER’S MANUAL SHORT REACH TRIMMER LONG REACH TRIMMER 848A3393A0 (801).
GB-2 SRTZ2610/SR TZ2610F/LRTZ2610 EC DECLARATION OF COMFORMITY We, Husqvarna Zenoah Co., Ltd. 1-9, Minamidai, Kawa goe, Saitama, Japan declare in sole responsibility that the follo wing products referred to in this declaration conform with DIRECTIVE 98/37/EC, prEN774 of 5th April 1994.
GB-3 G B SRTZ2610/SR TZ2610F/LRTZ2610 8 9 10 11 12 13 (SRTZ2610) (SRTZ2610F) (LR TZ2610) Information This machine is equipped with an Overload Cancellation Mec hanism.
GB-4 SRTZ2610/SR TZ2610F/LRTZ2610 Model SRTZ2610F Overall size (LxWxH) mm 1734 x 338 x 254 Dry weight * kg 6.5 Engine T ype Air -cooled 2-stroke gasoline Model Zenoah GZ25N Max output rpm 1.2Hp (0.9kW) at 7500min -1 Idle speed rpm 3000±200min -1 Displacement cm 3 25.
GB-5 G B SRTZ2610/SR TZ2610F/LRTZ2610 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2.
GB-6 SRTZ2610/SR TZ2610F/LRTZ2610 W ARNING Never place the thr ottle into the high-speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting at- tachment stops moving when the throttle is moved fully back to its original position.
GB-7 G B SRTZ2610/SR TZ2610F/LRTZ2610 • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area. Be car eful if you are ap- proached. Injury may result fr om flying debris. 2.
GB-8 SRTZ2610/SR TZ2610F/LRTZ2610 MIN SP ACING About 19 inches (48 cm) clamp arrow mark (1) 6. Set up MOUNTING ENGINE 1. Push the shaft tube toward the clutch housing and move it by hand to check that the drive shaft is engaged with the gears.
GB-9 G B SRTZ2610/SR TZ2610F/LRTZ2610 7. Fuel ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENO AH genuine oil) • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq.
GB-10 SRTZ2610/SR TZ2610F/LRTZ2610 8. Operation ST ARTING ENGINE W ARNING The cutting head will start moving upon the engine starts. 1. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surr ounding objects as it will start moving upon star ting of the engine.
GB-11 G B SRTZ2610/SR TZ2610F/LRTZ2610 8. Operation Idle adjusting screw W ARNING • This product is equipped with extr emely sharp blades, and when used improperly these blades can be ex- tremely danger ous, and improper handling can cause accidents which may in turn lead to serious injur y or death.
GB-12 SRTZ2610/SR TZ2610F/LRTZ2610 BLADES • When refilling the tank or r esting, it is often a good idea to use the time to oil the cutting blades. • If a gap exists between the upper and lower blades, follow the procedur e below to adjust them so that they fit more closely together .
GB-13 G B SRTZ2610/SR TZ2610F/LRTZ2610 9. Maintenance 9. Maintenance W ARNING Make sure that the engine has stopped and is cool before perf orming any service to the machine. Con- tact with moving cutting head or hot m uffler may re- sult in a personal injury .
GB-14 SRTZ2610/SR TZ2610F/LRTZ2610 9. Maintenance INT AKE AIR COOLING VENT W ARNING •N e ver touc h the cylinder , muffler , or spark plugs with your bare hands immediatel y after stopping the engine. The engine can become very hot when in operation, and doing so could result in se vere b urns.
GB-15 G B SRTZ2610/SR TZ2610F/LRTZ2610 Limited warranty Should any failure occur on the pr oduct under nor mal oper - ating conditions within the applicable warranty period, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer .
An important point after buying a device Zenoah LRTZ2610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah LRTZ2610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah LRTZ2610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah LRTZ2610 you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah LRTZ2610 will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah LRTZ2610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah LRTZ2610.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah LRTZ2610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah LRTZ2610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
