Instruction/ maintenance manual of the product HT2310 Zenoah
Go to page of 15
GB-1 G B HT2310 / CHT2310 HT2310 CHT2310 G B OWNER’S MANUAL HEDGE TRIMMER 848D0593A0 (706).
GB-2 HT2310 / CHT2310 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS APPROV AL NUMBER OF CE EXHAUST EMISSION REGULA TION e13*97/68SH2G3*2002/88*0104*04 W ARNING!!! RISK OF DAMAGING HEARING W ear head, eye and ear protection. W ARNING!!! RISK OF DAMAGING HEARING W ear head, eye and ear protection.
GB-3 G B HT2310 / CHT2310 SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail.
GB-4 HT2310 / CHT2310 2. Specification Model ............................................................................................. HT2310 / CHT2310 Ty pe .........................................................................................
GB-5 G B HT2310 / CHT2310 3. W arning labels on the machine 4. Symbols on the machine Read owner ’ s manual before operat- ing this machine. W ear head, eye and ear protection. W arning / Attention Keep all children, bystanders and helpers 15 meters away from the machine.
GB-6 HT2310 / CHT2310 2. Never use the product, a. when the ground is slippery or when you can’t maintain a steady posture. b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area.
GB-7 G B HT2310 / CHT2310 BEFORE ST AR TING THE ENGINE 1. The area within a perimeter of 15 m of the person using the product should be consider ed a hazardous ar ea into which no one should enter . If necessar y , yellow warning rope, warning signs should be placed around the pe- rimeter of the area.
GB-8 HT2310 / CHT2310 7. While operating the machine be always sure of a safe and secur e operating position especially when using steps or a ladder . • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W ar n adults to keep pets and children away fr om the area.
GB-9 G B HT2310 / CHT2310 ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled by the funda- mental engine parameters and components (eq.
GB-10 HT2310 / CHT2310 5. Place the unit on a flat, firm place. Keep the cutting head clear of everything around it. 6. While holding the unit firmly , pull out the star ter rope quickly until engine fires. 7. After the engine has started, allow the engine to war m up.
GB-11 G B HT2310 / CHT2310 CUTTING WORK W ARNING • W eather conditions and altitude may effect carburation. • Do not allow anyone to stay close to the hedge- trimmer while working or while adjusting the car- buretor .
GB-12 HT2310 / CHT2310 W ARNING • Make sure that the engine has stopped and is cool before performing any service to the machine. Con- tact with moving cutting head or hot muffler may result in a personal injury . BLADE ･ Check the blade and the fasteners for looseness, cracking, or bending.
GB-13 G B HT2310 / CHT2310 SP ARK PLUG • Starting failure and misfiring ar e often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a r e- placement plug, use the correct type specified by ZENOAH.
GB-14 HT2310 / CHT2310 PROCEDURES TO BE PERFORMED AF- TER EVER Y 100 HOURS OF USE 1. Remove the muffler , insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time.
GB-15 G B HT2310 / CHT2310 Limited warranty Should any failure occur on the pr oduct under nor mal operating conditions within the applicable warranty pe- riod, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer .
An important point after buying a device Zenoah HT2310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah HT2310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah HT2310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah HT2310 you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah HT2310 will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah HT2310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah HT2310.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah HT2310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah HT2310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
