Instruction/ maintenance manual of the product ZXS 646 IT Zanussi
Go to page of 16
1 BUIL T -IN HOB ZXS 646 IT INSTRUCTION BOOKLET UA SI HR.
2 About Inst allation, Cleaning and Maintenance • It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. • Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.
3 Once the hob has been inst alled, it is import ant to remove any protective materials, which were put on in the factory . Hob burners control knobs The hob burners control knobs are situated on the hob right hand side.
4 Burner minimum maximum diameter diameter Medium (semirapid) 120 mm. 220 mm. Small (Auxiliary) 80 mm. 160 mm. Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (fig.
5 Before the First Use of the Appliance Before using the appliance remove all packaging, including the advertising labels and any protective film. When using the hob for the first time: 1 ) place on a.
6 Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water.
7 Gas Burners Rating Auxiliary Burner 1 kW Semirapid Burner 2 k W Appliance Class 3 Category II 2H3B/P Setting LPG G30/G31 30/37 mbar Gas connection G 1/2" The following instructions about installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force.
8 FO 0067 Fig. 4 Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If using flexible metallic pipes, be careful they do not come in contact with mobile p a rts or they are not squeezed. Use the same attention when the hob is combinated with an oven.
9 The following instructions about installation must be carried out by qualified personnel in compliance with the regulation in force. The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force.
10 Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2 ).
11 These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in the relevant diagram. The edge of the cut out must have a minimum distance from the rear wall of 55 mm.
12 a ) Removable panel b ) Space possibly useful for connections Fig. 12 Fig. 13 Fig. 15 Fig. 16 FO 1013 FO 0947 FO 0198 Kitchen unit with door Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated.
13 European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law .
14.
15.
35675-9104 R.B 05/09.
An important point after buying a device Zanussi ZXS 646 IT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZXS 646 IT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZXS 646 IT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZXS 646 IT you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZXS 646 IT will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZXS 646 IT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZXS 646 IT.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZXS 646 IT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZXS 646 IT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
