Instruction/ maintenance manual of the product ZWF 91283 W LINDO 300 Zanussi
Go to page of 20
EN ZWF 91283W ZWF 91483W User Manual Washing Machine.
Contents Safety information 2 Safety instructions 3 Product description 4 Control panel 5 Programme Chart 6 Consumption values 7 Options 8 Settings 9 Before first use 10 Daily use 10 Hints and tips 13 Care and cleaning 14 Troubleshooting 15 Technical Data 17 Subject to change without notice.
• The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets.
• The first time you use the appliance, make sure that there is no leakage. Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging.
Control panel Control panel description Quick 1400 90° 60° 40° 30° 1200 800 Intensive Easy Iron Rinse Only Drain & Spin Cottons Synthetics Delicates Wool/Handwash Duvets Mix 20° Cotton ECO P .
Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30' @ 30° 30 °C A short cycle for synthetics and delicate items with light soil level or for items to freshen up.
Programme options compatibility Pro- gramme Quick 1) In- ten- sive Easy Iron Rinse Only Drain & Spin 30' @ 30° ■ ■ ■ ■ Cottons ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Cotton Eco ■ .
Pro- grammes Load (kg) Energy con- sumption (kWh) Water con- sumption (litre) Approxi- mate pro- gramme du- ration (mi- nutes) Remaining moisture (%) 1) Wool/Hand- wash 30 °C 2 0,30 63 57 30 2) / 30 .
The related indicator comes on. Intensive With this option you can wash very soiled laundry. The washing cycle lasts longer with this option. The related indicator comes on. Easy Iron The appliance carefully washes and spins the laundry to prevent the creases.
If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. Before first use 1. Put a small quantity of detergent in the compartment for washing phase. 2. Set and start a programme for cotton at the highest temperature without laundry.
To use liquid detergent: 1. Remove the drawer. Push the drawer edge in the place with the arrow (PUSH) to remove the drawer easily. B 2. Adjust the flap in position B . 3. Put back the drawer in the recess. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents.
You can cancel or change the set of the Finish In option before you touch the button . After touching the button you can only cancel the Finish In option. To cancel the the Finish In option: a. Touch the button to set the appliance to pause. The indicator of button flashes.
water and spins. If you set , the appliance only drains. 2. When the programme is completed and the door lock indicator goes off, you can open the door. 3. Press the button for some seconds to deactivate the appliance. The appliance drains and spins automatically after approximately 18 hours (except for Wool programme).
• To use the correct quantity of the detergent, check the water hardness of your domestic system Water hardness If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener.
Cleaning the inlet hose and the valve filter 1 2 3 1 2 3 45° 20° 4 Frost precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain.
Possible failures Problem Possible solution The programme does not start. • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is not a damaged fuse in the fuse box.
Problem Possible solution The appliance fills with water and drain immediately. • Make sure that the drain hose is in the correct position. The end of the hose may be too low. Refer to 'Installation instruction'. The cycle is shorter than the time displayed.
Spin Speed Maximum 1200 rpm (ZWF 91283W) 1400 rpm (ZWF 91483W) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it.
www.zanussi.com 19.
www .zanussi.com/shop 192974690-A-072014.
An important point after buying a device Zanussi ZWF 91283 W LINDO 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWF 91283 W LINDO 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWF 91283 W LINDO 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWF 91283 W LINDO 300 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWF 91283 W LINDO 300 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWF 91283 W LINDO 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWF 91283 W LINDO 300.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWF 91283 W LINDO 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWF 91283 W LINDO 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
