Instruction/ maintenance manual of the product ZWF 01483 WH LINDO 300 Zanussi
Go to page of 20
EN ZWF 01483WR ZWF 01483WH User Manual Washing Machine.
Contents Safety information 2 Safety instructions 3 Product description 4 Control panel 5 Programme Chart 6 Consumption values 7 Options 8 Settings 9 Before first use 9 Daily use 9 Hints and tips 12 Care and cleaning 13 Troubleshooting 15 Technical Data 17 Subject to change without notice.
• The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets.
• The first time you use the appliance, make sure that there is no leakage. Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging.
Control panel Control panel description Quick 1400 90° 60° 40° 30° 1200 800 Intensive Easy Iron Rinse Only Drain & Spin Cottons Synthetics Delicates Wool/Handwash Duvets Mix 20° Cotton ECO P .
Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30' @ 30° 30 °C 3 kg 800 rpm A short cycle for synthetics and delicate items with light soil level or for items to freshen up.
Pro- gramme Quick 1) In- ten- sive Easy Iron Rinse Only Drain & Spin Delicates ■ ■ ■ ■ ■ ■ ■ ■ ■ Wool/Hand- wash ■ ■ ■ ■ ■ ■ Duvets ■ ■ ■ ■ ■ ■ Mix 20° ■ ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Off Mode (W) Left On Mode (W) 0,48 0,48 The information given in the chart above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. Options Temperature With this option you can change the default temperature.
The display shows the number of hours and the indicator above the button is on. Extra Rinse With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on.
Make sure not to put too much laundry in the drum. Refer to max. loads indicated in "Programme chart". 4. Close the door. CAUTION! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry.
A tune sounds when the appliance is activated. The appliance performs a start up animation. The animation quickly shows each washing programme and the default temperature and spin settings. The display shows the word On. Setting a programme 1. Touch the programme button and set the programme: • The indicator of the button flashes.
CAUTION! If the temperature and level of the water in the drum are too high, you cannot open the door. To open the door during the first minutes of the cycle (or when the operates) : 1. Touch the button to pause the appliance. 2. Wait until the indicator goes off.
• Remove hard stains. • Wash with a special detergent heavy soil stains. • Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase. • Do not wash in the appliance laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.
Maintenance wash With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash. To do this: • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent.
WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. Troubleshooting WARNING! Refer to Safety chapters. Introduction The start of the appliance does not occur or it stops during operation.
Problem Possible solution The appliance does not drain the water. • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. • Make sure that the connection of the drain hose is correct. • Set the drain option if you set a programme without drain phase.
If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. Service We recommend the use of original spare parts. When contacting the Authorised Service Centre, make sure that these data are available.
18 www.zanussi.com.
www.zanussi.com 19.
www .zanussi.com/shop 192974970-A-092014.
An important point after buying a device Zanussi ZWF 01483 WH LINDO 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWF 01483 WH LINDO 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWF 01483 WH LINDO 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWF 01483 WH LINDO 300 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWF 01483 WH LINDO 300 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWF 01483 WH LINDO 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWF 01483 WH LINDO 300.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWF 01483 WH LINDO 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWF 01483 WH LINDO 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center