Instruction/ maintenance manual of the product ZVR 47 R Zanussi
Go to page of 20
FREEZER ZVR 47 R 2222691-68 INSTRUCTION BOOKLET.
2 Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Start your appliance 5 T emperature control 5 W arning light (red) 5 Freezing fresh .
3 IMPORT ANT SAFETY INSTRUCTIONS Prior to Installation ■ Check the appliance for transport damage. Under no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer . Installation ■ This appliance is heavy .
1 2 3 4 5 6 DESCRIPTION OF THE APPLIANCE 4 Servicing ■ This product should be serviced by an authorised engineer and only genuine spare parts should be used. ■ Under no circumstances should you attempt to repair the appliance yourself. Repairs carrier out by inexperienced persons may cause injury or serious malfunctioning.
OPERA TION 1 2 3 4 5 6 Freezer controls Start your appliance Insert the plug into the wall socket. The pilot light ➄ will light up to show that the appliance is on. T emperature control The temperature inside the freezer is regulated by a thermostat ➀ with 6 temperature positions and one «OFF» (O) position.
6 Distribute the frozen food packages in the other compartments, so that the two top compartments can be used for a further freezing operation. Only freeze top quality , fresh and thoroughly cleaned foodstuffs. Do not allow fresh food to touch food which is already frozen.
7 Cold accumulator The freezer contains one cold accumulator which can be found in the top compartment. The cold accumulator increases storage times in the event of a power cut or breakdown.
HEAL TH AND SAFETY GUIDELINES The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
9 T urn the thermostat control to a medium setting between 2 and 4 and push in the «fast freeze» control knob. After letting the appliance run for at least two hours in the «fast freeze» mode, replace the previously removed food into the compartments.
SOMETHING NOT WORKING? If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
11 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
12.
13.
14 Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty w.
15 TECHNICAL SPECIFICA TIONS DIMENSIONS Height 85 cm Width 59.5 cm Depth 60 cm POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 90 W A VERAGE DAIL Y UNITS ELECTRICITY(*) 0.
16 Door reversal Before carrying out the operations described below , pull out the mains plug from the wall socket. T o carry out this reversal go through the following steps: 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
17 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
.
.
© Electrolux Household Appliances Limited 2000.
An important point after buying a device Zanussi ZVR 47 R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZVR 47 R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZVR 47 R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZVR 47 R you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZVR 47 R will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZVR 47 R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZVR 47 R.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZVR 47 R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZVR 47 R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
