Instruction/ maintenance manual of the product ZVR 45 R Zanussi
Go to page of 20
FREEZER ZVR 45 R ZVR 45 RN 2222690-98 INSTRUCTION BOOKLET.
2 Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Start your appliance 5 T emperature control 5 W arning light (red) 5 Freezing fresh .
IMPORT ANT SAFETY INSTRUCTIONS Prior to Installation ■ Check the appliance for transport damage. Under no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer . Installation ■ This appliance is heavy .
1 2 3 4 5 6 4 ■ When unplugging always pull the plug from the mains socket, do not pull on the cable. Servicing ■ This product should be serviced by an authorised engineer and only genuine spare parts should be used. ■ Under no circumstances should you attempt to repair the appliance yourself.
OPERA TION Freezer controls Start your appliance Insert the plug into the wall socket. The pilot light ➂ will light up to show that the appliance is on. T emperature control The temperature inside the freezer is regulated by a thermostat ➄ with 6 temperature positions and one «OFF» (O) position.
Once the food is completely frozen (which could take up to 24 hours) return the fast freeze switch to the «OFF» position; the yellow light ➁ goes out. Distribute the frozen food packages in the other compartments, so that the top compartment can be used for a further freezing operation.
Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever .
The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply . W arning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.
10 If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
11 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
12.
13.
14 Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty w.
DIMENSIONS Height 85 cm Width 54,5 cm Depth 60 cm POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 1 10 W A VERAGE DAIL Y UNITS ELECTRICITY (*) 0,77 kWh GROSS CAP ACITY 1 10 l NET CAP ACITY 100 l ST AR RA TING (*) This figure is based on standard test results in accordance with European Standard EN153.
16 Door Reversal Before carrying out the operations described below , pull out the mains plug from the wall socket. Carry out door reversal as follows: 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
17 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
.
.
© Electrolux Household Appliances Limited 2000.
An important point after buying a device Zanussi ZVR 45 R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZVR 45 R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZVR 45 R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZVR 45 R you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZVR 45 R will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZVR 45 R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZVR 45 R.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZVR 45 R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZVR 45 R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
