Instruction/ maintenance manual of the product ZU 9120 F Zanussi
Go to page of 20
2222739-85 INSTRUCTION BOOKLET FREEZER ZU 9120 F.
2 Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 4 Before use 4 Freezer controls 4 Starting your appliance 5 T emperature control 5 W arning light (.
3 Prior to Installation ■ Check the appliance for transport damage. Under no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer . Installation ■ This appliance is heavy . Care should be taken when moving it.
➄➅ ➆ DESCRIPTION OF THE APPLIANCE 4 ➀ Freezer calendar (recommended storage times for frozen foods) ➁ Air outlet duct ➂ Freezer controls ➃ Air inlet filter ➄ Comparments for storing frozen food ➅ Compartments for freezing fresh food ➀ ➁ ➂ ➃ ➄ ➄ ➅ ➅ OPERA TION Before use Remove all securing tapes.
Starting your appliance Insert the plug into the wall socket. The appliance can be activated/deactivated by pressing the ON/OFF button ➅ .The pilot light ➄ will light up to show that the appliance is on.
Thawing Frozen food, prior to being used, can be thawed in the fridge or at room temperature depending on the time available. Small food items may even be cooked from frozen; in this case cooking will take longer . Any frozen food which is allowed to thaw accidentally should either be eaten as soon as possible or thrown away .
The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thick- ness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC- TRICITY supply . W arning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.
9 SOMETHING NOT WORKING? If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
10 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part there- of is proved to be defective by reason only of faulty wo.
DIMENSIONS Height 81,5 cm Width 56 cm Depth 53,8 cm POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 100 W A VERAGE DAIL Y UNITS ELECTRICITY (*) 0,76 kWh GROSS CAP ACITY 95 l NET CAP ACITY 86 l ST AR RA TING (*)This figure is based on standard test results in accordance with European Standard EN153.
13 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suit- able for your socket outlet, it must be cut off and the appropriate plug fitted.
14 BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Grid preparation Remove the grid from the appliance pulling it towards you by hand. Right door opening: Remove the left side (A) of the grid cutting it from the rear (see figure, a).
15 Building the appliance in under a worktop The dimensions of the recessed installation area must correspond with those indicated in the figure. The appliance could be inserted between two units (a) or as an end unit (b).
PR33/2 C A 16 5. Place guide (A) on the inside part of the furniture door , up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws sup- plied. 20mm A 50mm PR166 6. Fix cover (C) on guide (A) until it clips into place.
17 Fitting the plinth Important For the efficient operation of the appliance, it is important that the original ventilation grid is used. ■ For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments.
.
.
© Electrolux Household Appliances Limited 2002.
An important point after buying a device Zanussi ZU 9120 F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZU 9120 F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZU 9120 F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZU 9120 F you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZU 9120 F will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZU 9120 F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZU 9120 F.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZU 9120 F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZU 9120 F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
