Instruction/ maintenance manual of the product ZT 6905 Zanussi
Go to page of 28
DISHW ASHER ZT 6905 IN S TRUCTION BOOK 152977 34/1 UK COP04.
2 The control panel Description of the appliance 1. Levelling spacers 2. Upper basket stop 3. Upper spray arm 4. Salt container 5. Large filter 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Central filter 11 . Lower spray arm 12.
3 T ype of load Degree of soil and type of load Required push buttons Recommended quantity of detergent wash prewash Cycle description PRO20en W ashing programmes RINSE & HOLD INTENSIVE 70°C NORM.
4 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the ON/OFF push button The ON/OFF indicator light comes on. 3. Check that there is rinse aid and salt 4. Load the dishes Remove any scraps of food.
5 Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
6 The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces.
Dimensions Width 59.6 cm Height 81.8 - 87.8 cm Max depth 55.5 cm Max depth with open door 1 1 1.4 cm Electrical connection V oltage 220/240 V - 50 Hz Motor rating during wash 200 W Power of heating element 2100 W Overall power 2300 W W ater supply pressure Minimum 50 kPa (0.
Instruction Book - part 1 - Before use - Maintenance - Installation 1 Contents Important safety information 2 Before use 3 Setting the water softener 3 Filling with salt 4 Filling with rinse aid and a.
Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
3 Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5.
4 Filling with salt Attention! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher , especially table salt, will damage the water softener . Only fill with salt just before starting a washing programme.
5 Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
6 Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action T ablets. Each tablet has the exact amount of detergent required, simply place in the dispenser .
7 T o save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "W ashing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
8 Internal cleaning Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
9 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc.
10 Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.
11 If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number . This information can be found on the rating plate located on the right hand side of the dishwasher door . This product should be serviced by an authorised Service engineer , and only genuine spare parts should be used.
12 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine.
13 min 30 cm max 100 cm max 100 cm + 2 m max CS10 Ø 18 Ø 21 W ater outlet hose connection The end of the drain hose can be connected in the following ways: 1. T o the sink outlet spigot, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide ( if provided ).
14 Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Centre by telephoning: 08705 929 929 Y our telephone call will be automatically routed to the Service Force centre covering your post code area.
To contact your local Service Force Centre telephone 08705 929 929 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut .
To contact your local Service Force Centre telephone 08705 929 929 MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St.
Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Centre by telephoning: 08705 929 929 Y our telephone call will be automatically routed to the Service Force centre covering your post code area.
.
.
From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
An important point after buying a device Zanussi ZT 6905 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZT 6905 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZT 6905 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZT 6905 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZT 6905 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZT 6905, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZT 6905.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZT 6905. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZT 6905 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
