Instruction/ maintenance manual of the product ZHC 935 Zanussi
Go to page of 19
COOKER HOOD ZHC 935 INSTRUCTION BOOKLET.
2 Customer Care Department Zanussi 55 - 77 High Street Slough Berkshire SL1 1DZ T el: 08705 727 727 T o register ownership, please ensure you complete and return the guarantee card sup- plied with the appliance. Thank you for buying a Zanussi product.
3 These warnings are provided in the interests of safety . Ensure that you understand them all be- fore installing or using this appliance. Y our safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department.
4 YOUR APPLIANCE This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. Cooker Hood Controls The cooker hood functions are controlled by five push button switches located centrally in the control fascia.
5 T o Operate Select the required fan speed and light if required. The appliance can be installed to recirculate or extract contaminated air . The cooker hood is more effective when used in the extraction mode. Recirculation The cooker hood is supplied specified for use in the recirculation mode with the charcoal filter fitted.
6 Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply . The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. External Cleaning The metal casing, visor and chimney should be cleaned at least once a month to keep the hood looking like new .
7 MAINTENANCE AND CLEANING Charcoal Filter The charcoal filter cannot be cleaned or regenerated, it should be replaced approximately every three months or more frequently if the hood is used for more than three hours per day . T o Remove the Charcoal Filter Remove the metal grease filter .
8 If, having followed these instructions carefully , your cooker hood fails to work properly please carry out the following checks. SOMETHING NOT WORKING Symptom The cooker hood will not start • Check the hood is connected to the electricity supply .
9 GUARANTEE CONDITIONS We, Zanussi, undertake that if within twenty four months of the date of the purchase this Zanussi built-in product or any part thereof is proved to be defective by reason only o.
10 INST ALLA TION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way . T echnical information DIMENSIONS HEIGHT OF CANOPY : 73mm HEIGHT OF CHIMNEY : (UPPER SECTION) 215mm (LOWER SECTION) 740mm WIDTH OF CANOPY : 898mm DEPTH OF CANOPY : 500mm WEIGHT : (GROSS) 24.
11 Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air . Incorrect installation may affect the safety of this cooker hood.
12 Clearance Heights The cooker hood is designed to be fitted over a cooking appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the T echnical Specifications.
13 Fitting the W all Brackets Draw a vertical line on the wall from the centre of the cooking appliance up to the ceiling, or as high as the adjoing wall cabinets using a spirit level and marker pen. This is to ensure the correct vertical alignment of the appliance.
15 Ducting the Cooker Hood When installing the cooker hood in the ducting mode, connect the hood using either Ø150 or 120mm flexi ble or rigi d p ipe. The choice of ducting should be specified by the installer but Ø150mm rigid ducting will ensure the best performance possible.
1 5 Fitting the Chimney Stack The chimney consists of two sections. The upper chimney measures 215mm and the lower chimney (with the holes for recirculation on either side) measures 740mm. - Upper Chimney Stack - Expand the sides of the upper chimney stack item 2.
1 6.
1 7.
1 8.
436000659 02 - 020626 © Electrolux plc 2002.
An important point after buying a device Zanussi ZHC 935 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZHC 935 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZHC 935 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZHC 935 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZHC 935 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZHC 935, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZHC 935.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZHC 935. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZHC 935 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
