Instruction/ maintenance manual of the product ZGG62414SA Zanussi
Go to page of 16
EN User manual Hob ZGG62414 IE GB CY.
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ .
• Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. • Never try to extinguish a fire wi th water, but switch off the appli- ance and then cover fl ame e.g. with a lid or a fire blanket. • Do not store items on the cooking surfaces.
moved from the holder), earth leakage trips and contactors. Gas connection • All gas connections should be made by a qualified person. • Make sure that there is air circulation around the appliance. • The information about the gas supply is on the rating plate.
Product description Cooking surface layout 1 2 5 4 3 1 Semi-rapid burner 2 Semi-rapid burner 3 Control knobs 4 Auxiliary burner 5 Rapid burner Control knobs Symbol Descripti on no gas supply / off posi- tion Symbol Description ignition posit ion / maxi- mum gas supply minimum gas supply Daily use Warning! Refer to the Safety chapters.
A B C D A) Burner cap B) Burner crown C) Ignition candle D) Thermocouple Warning! Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute.
Care and cleaning Warning! Refer to the Safety chapters. Warning! Deactivate the appliance and let it cool down before you clean it. Disconnect the appliance from the electrical supply before you do cleaning or maintenance work . Scratches or dark stains on the surface have no effect on how the appliance oper- ates.
Problem Possible cause Remedy • Burner cap and crown are placed uneven • Make sure th at the burner cap and crown are in co rrect posi- tions. The flame is blow out immediately after igni tion • Thermocouple is not heated sufficient • After lightnin g the flame, keep the knob pushed for approxi- mately 5 secon ds.
Installation Warning! Refer to the Safety chapters. Warning! The gas settings of this appliance are not applicable for Cyprus. If you install this appliance in Cyprus, you must change the nozzles be fore you connect the appliance. To change the nozzles refer to the type of gas used.
AB C A) End of shaft with nut B) Washer C) Elbow Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop- per. The connection should be suitable for connect- ing to R 1/2 (1/2 BSP male thread).
• The appliance must not be connected with an extension cable, an adapter or a multiple socket. There is a risk of fire. • Do not let the power cable to heat up to a temperature of more than 90° C.
To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the voltage load and the working temperature. The yellow/green earth wire (B) must be approxi- mately 2 cm longer than the live and neutral wire (A).
Technical information Hob dimensions Width: 580 mm Length: 500 mm Hob recess dimensions Width: 550 mm Length: 470 mm Heat input Rapid burner: 3.0 kW Semi-rapid burner: 2.
BURNER NORMAL POWER RE- DUCED POWER NORMAL POWER NATURAL GAS G20 (2H) 20 mbar LPG (Butane/Propane) G30/G31 (3+) 28-30/37 mbar kW kW inj. 1/100 mm m³/h inj. 1/100 mm G30 28–30 mbar G31 37 mbar g/h g/h Rapid 3.0 (natural gas) 2.8 (LPG) 0.75 119 0.286 86 204 200 Gas burners for LPG G30/G31 30/30 mbar - only Cyprus BURNER NORMAL POWE R kW inj.
15 www.zanussi.com.
www.zanussi.com/shop 397226001-B-392012.
An important point after buying a device Zanussi ZGG62414SA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZGG62414SA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZGG62414SA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZGG62414SA you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZGG62414SA will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZGG62414SA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZGG62414SA.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZGG62414SA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZGG62414SA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
