Instruction/ maintenance manual of the product ZFU25200WA Zanussi
Go to page of 16
EN User manual Freezer ZFU25200WA.
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product des cription _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ .
During transportation and installation of the appliance, be certain that none of the com- ponents of the refr igerant circuit become damaged. If the refrigerant cir cuit should become dam- aged: – a.
• It is advisable to wait at least four hours be- fore connecting the appliance to allow the oil to flow back in the compressor. • Adequate air circulation should be around the appliance, lacking this leads to overheat- ing. To achieve sufficient ventilation follow the instructions relevant to installation.
Product description 1 2 5 3 4 6 1 Control panel 2 Cold module 3 Flaps 4 Freezer baskets 5 Rating plate 6 Maxibox baskets Control panel 1 2 3 4 5 1 Alarm Light 2 Fast Freeze Indicator 3 Fast Freeze Switch 4 Pilot Light 5 Temperature Regulator Switching on Insert the plug into the wall socket.
Temperature regulation The temperature is automatically regulated. To operate the appliance, proceed as follows: • turn the Temperature regulator toward lower settings to obtain the minimum coldness. • turn the Temperature regulator toward higher settings to obtain the maximum coldness.
12 The appliance is equipped with shelf stops to secure the shelves. The shelves must be lifted up (1) on each side and than pulled outwards (2). The glass shelves equipped with expander roll- ers are secured with locking pins. 1 2 1 To remove them proceed as follow: 1.
• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; • the freezing process takes 24 hours. No fur- ther food to be frozen should be added dur- ing this peri.
is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. Troubleshooting Warning! Before troubleshooting, disconnect the mains plug from the mains socket.
Technical data Dimension Height 1850 mm Width 600 mm Depth 660 mm Rising Time 15 h Voltage 230 - 240 V Frequency 50 Hz The technical information are situated in the rat- ing plate on the internal left side of the appli- ance and in the energy label.
Warning! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. AB C D E Important! The wires in the mains lead are coloured in accordanc.
Door reversibility Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations. To change the opening dire ction of the door, do these steps: • Remove the plug from the power socket.
• The edges of the doors run parallel to the side edge of the appliance. • The magnetic seal adheres to the cabinet. • The door opens and close s correctly. It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the co mpressor.
14 www.zanussi.com.
15 www.zanussi.com.
www.zanussi.com/shop 280151043-A-492012.
An important point after buying a device Zanussi ZFU25200WA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZFU25200WA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZFU25200WA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZFU25200WA you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZFU25200WA will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZFU25200WA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZFU25200WA.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZFU25200WA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZFU25200WA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
