Instruction/ maintenance manual of the product ZFE 74 W Zanussi
Go to page of 20
FREEZER ZFE 74 W 2222691-69 INSTRUCTION BOOKLET.
2 Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Starting your appliance 5 T emperature control 5 W arning light (red) 5 T emperature.
3 IMPORT ANT SAFETY INSTRUCTIONS Prior to Installation ■ Check the appliance for transport damage. Under no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer . Installation ■ This appliance is heavy .
DESCRIPTION OF THE APPLIANCE 4 ■ Manufacturers’ recommended storage times should be adhered to. Refer to relevant instructions. Maintenance and Cleaning ■ Before cleaning, always switch off the appliance and disconnect from the electrical supply .
OPERA TION Starting your appliance Insert the plug into the wall socket. The appliance can be activated by turning the thermostat knob ➁ beyond the “-16°C” position. When the pilot light ➀ is illuminated this shows that the appliance is on. Freezer operation can be halted by turning knob ➁ to position « ● ».
6 T o remove the drawers, proceed as follows: pull the drawer out until it comes to a stop, then tilt it upwards (see figure). PR001c Freezing fresh food In any 24 hour period you can freeze up to 20 kg of fresh food.
7 Thawing Frozen food, prior to being used, can be thawed in the fridge or at room temperature depending on the time available. Small food items may even be cooked from frozen; in this case cooking will take longer . Any frozen food which is allowed to thaw accidentally should either be eaten as soon as possible or thrown away .
8 The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
9 MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply . W arning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.
10 SOMETHING NOT WORKING? If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
11 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
12 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 V ale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut De L ’orme Rue De Haut De L ’orme T rinity Jersey Channel I.
13 LONDON & EAST ANGLIA BECKENHAM 1 1a Gardner Ind. Estate Kent House Lane Beckenham Kent BR3 1QZ CHELMSFORD Hanbury Road Widford Ind. Estate Chelmsford Essex CM12 3AE COLINDALE Unit 14 Capitol Pa.
14 Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty w.
15 TECHNICAL SPECIFICA TIONS DIMENSIONS Height 85 cm Width 59.5 cm Depth 60 cm POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 90 W A VERAGE DAIL Y UNITS ELECTRICITY(*) 0.
16 Door reversal Before carrying out the operations described below , pull out the mains plug from the wall socket. T o carry out this reversal go through the following steps: 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
17 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
.
.
© Electrolux Household Appliances Limited 2001.
An important point after buying a device Zanussi ZFE 74 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZFE 74 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZFE 74 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZFE 74 W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZFE 74 W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZFE 74 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZFE 74 W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZFE 74 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZFE 74 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
