Instruction/ maintenance manual of the product ZF 24 W Zanussi
Go to page of 16
FREEZER ZF 24 W 2222693-07 INSTRUCTION BOOKLET.
2 CONTENTS Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Freezer controls 5 Starting your appliance 5 T emperature control 5 W arnin.
3 General Safety ■ This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorised technicians. ■ T ake utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.
■ When unplugging always pull the plug from the mains socket, do not pull on the cable. Servicing ■ This product should be serviced by an authorised engineer and only genuine spare parts should be used. ■ Under no circumstances should you attempt to repair the appliance yourself.
When altering the temperature setting, allow 24 hours for the temperature to stablise before making further changes. For easier turning of this control, use a small coin.
Freezing calendar The symbols on the drawers show different types of frozen goods. The numbers indicate storage times in months for the appropriate types of frozen goods. Whether the upper or lower value of the indicated storage time is valid depends on the quality of the foods and pre-treating before freezing.
7 Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever .
The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply . W arning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.
10 If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
11 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty work.
13 INST ALLA TION D200 50-100 mm 10 mm 10 mm A B NP006 Positioning For this appliance to work efficiently , it must not be located where the temperatures will fall below 10°C (50°F) or rise above 32°C (90°F), e.g. conservatories. For correct operation this appliance must be located in a dry atmosphere, away from heat sources, e.
Door reversal Before carrying out the operations described below , pull out the mains plug from the wall socket. T o carry out this reversal go through the following steps: 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
15 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
© Electrolux plc 2002.
An important point after buying a device Zanussi ZF 24 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZF 24 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZF 24 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZF 24 W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZF 24 W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZF 24 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZF 24 W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZF 24 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZF 24 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
