Instruction/ maintenance manual of the product ZDF 501 Zanussi
Go to page of 32
User manual Dishwasher ZDF 501 156999 58/0en 17-03-2006 14:09 Pagina 1.
2 Content Safety information - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - -4 Programme table - - - - - - - - - - - - - - - - - - -7 Before the first use - - - -.
3 Safety information Correct use ● This dishwasher is only intended for washing household utensils suitable for machine washing. ● Do not put any solvents in the dishwasher .
4 ● Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.
5 Programme selection buttons ● Starting the washing programme: 1. Press the On/Off button. 2. Press the button corresponding to the required programme, the corresponding light remains illuminated while the other programme lights turn off. In the digital display will appear, flashing, the running time of the programme (in minutes).
6 Programme in progress light I lluminates when the washing programme has been set. When the delay start has been set, this light turns off and will come on again once the countdown has elapsed and the washing programme has started. Salt refilling light I lluminates when special salt needs to be filled.
7 Programme Use Cycle description Programme table Auto Normal / Light soil. Prewash - Main wash 65°50° Crockery and cutlery 1 or 2 intermediate rinses Final rinse - Dry Intensive Heavy soil. Prewash - Main wash 70° Crockery , cutlery , pots and pans 2 intermediate rinses - Final rinse Dry Rinse and Any .
Before the first use When using separate special (dishwasher) salt, rinse aid and detergent: - set the water softener - add special (dishwasher) salt - fill up with rinse aid When using tablets that i.
9 1) Clarke degree, measure of the water hardness. 2) (°TH) French degree, measure of the water hardness. 3) (mmol/l) millimol per litre, international unit for water hardness The water softener is factory set at position 2.
10 Setting the water softener electronically (see table) The dishwasher must be switched off. Switch on the dishwasher by pressing the On/Off button. The digital display indicates the current level. T o change the level, press function button 1 . Each time the button is pressed the level increases.
11 Filling with dishwasher salt Unscrew the cap. Only before filling with salt for the first time , fill the salt container with water Using the funnel provided, pour in the salt until the container is filled with salt. Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click.
Filling with rinse aid 12 Open the lid. Fill up with rinse aid. The maximum level for filling is indicated by " max " . Clean up any rinse aid which overflows. Close the lid and press until it locks. CAUTION! Never fill the rinse aid dispenser with any other substances (e.
13 Loading cutlery and dishes ● The following items are not suitable for use in the dishwasher: - Cutlery with wooden, horn, china or mother-of-pearl handles - Plastic items that are not heat resist.
14 Load the lower basket. Arrange serving dishes and large lids around the edge of the basket. The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. Load upper basket. Light items (plastic bowls etc.
15 IMPORTANT! Never lift or lower the basket on one side only IMPORTANT! When the basket is in the higher position you will not be able to use the cup racks. To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable.
16 Filling with detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer ’s dosing and storage recommendations. Open the lid. For programmes with prewash add an additional detergent dose in compartment B. When using detergent tablets: place detergent tablets in compartment A.
17 Cleaning and care IMPORTANT! NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters IMPORTANT! NEVER try to remove the spray arms. If residues of soil have clogged the holes in the upper spray arm, remove them with a toothpick.
18 Environmental concerns External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc.
19 Fault code / malfunction Possible cause Solution Something not working The dishwasher does not fill with water . - continuous flashing of the light of the running programme - appears in the digital display The dishwasher will not drain.
20 The wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arm do not rotate freely due to incorrect arrangement of the load.
21 Technical data Consumption values Dimensions Width 60 cm Height 85 cm Depth. 61 cm W ater supply pressure Minimum 0,05 MPa (0.5 bar) Maximum 0,8 MPa (8 bar) Electrical connection Information on the electrical connection is given on the rating plate on V oltage - Overall power - Fuse the inner edge of the dishwasher ’s door .
22 T esting in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Consumption values").
23 CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Inlet hose Connect the inlet hose to a water tap with an external thread of 3/4”.
24 Ensure that the hoses are not kinked, crushed or entangled. CAUTION! Always be sure, that there is no water leakage from hoses and their connections after the installation. WARNING! Multi-way plugs, connectors and extension cables must not be used.
25 Fitting under a counter By removing the dishwasher ’s worktop, you can install it under a close fitting sink unit or a pre-existing top. Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.
26 Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
27 Guarantee conditions Standard Guarantee Conditions We, Zanussi-Electrolux, undertake that if within 12 months of the date of purchase this ZANUSSI-ELECTROLUX appliance or any part thereof is proved.
28 This appliance is guaranteed by Electrolux, in each of the countries listed in the following page, for the period specified in the appliance guarantee or otherwise by law .
29 www.electrolux.com Albania +35 5 4 261 450 Rr . Pjeter Bogdani Nr. 7 Tirane Belgique/België/Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Danmark +45 70 1 1 74 00 Sjællandsgade 2, 7000 Fredericia Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 T allinn France www .
30 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www .electrolux.com www .zanussi-electrolux.co.uk Subject to change without notice 156999 58/0 156999 58/0en 17-03-2006 14:09 Pagina 32.
An important point after buying a device Zanussi ZDF 501 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZDF 501 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZDF 501 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZDF 501 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZDF 501 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZDF 501, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZDF 501.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZDF 501. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZDF 501 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
