Instruction/ maintenance manual of the product ZBB26650SA Zanussi
Go to page of 16
EN User manual Fridge-Freezer ZBB26650SA.
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Daily use _ _ _ _ _ _ .
2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squash- ed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable.
Environment Protection This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant cir- cuit or insulation materials.
– The display indicates the freezer temperature. In any case, after 10 seconds normal display conditions are restored. Functions menu Each time Function button is pressed, the following func- tions are activated in a clockwise direction: • Fast Freeze function • Shopping function • no symbol: normal operation.
First use Cleaning the i nterior Before using the appliance for the first time, wash the inte- rior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish.
Helpful hints and tips Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator.
Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. • regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly.
Problem Possible cause Solution The door does not close tightly or it is not shut properly Check if the doors close w ell and the gaskets are undamaged and clean The door has been opened too fre- quen.
Problem Possible cause Solution Plug is not connected to the mains socket properly Connect the mains plug properly Power does not reach the appliance Try connecting another electrical device to the po.
Positioning Install this appliance at a location where the ambient tem- perature corresponds to the climate class indicated on the rating plate of the appliance: Clima te class Ambient temperature SN .
4 Remove the lower door. 4 Loosen the lower pin. On the opposite side: 1 Install the lower pin. 2 Install the lower door. 3 Tighten the middle hinge. 4 Install the upper door. 5 Tighten the spacer and the upper pin. Ventilation requ irements The airflow behind the ap- pliance must be sufficient.
5 Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in oppo- site case. E E D C B 6 Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B). Attach the hinge covers (E) to the hinge.
Environmental concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
15 www.zanussi.com.
www.zanussi.com/shop 222344529-A-472011.
An important point after buying a device Zanussi ZBB26650SA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZBB26650SA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZBB26650SA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZBB26650SA you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZBB26650SA will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZBB26650SA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZBB26650SA.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZBB26650SA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZBB26650SA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
