Instruction/ maintenance manual of the product YVC York
Go to page of 12
INST ALLA TION, OPERA TION, & MAINTENANCE F AN COIL AIR CONDITIONERS Supersedes: Form 1 15.20-NOM3 (105) Form 1 15.20-NOM3 (1006) ***** W ARNING T O INST ALLER, SERVICE PERSONNEL AND OWNER ***** A.
YORK INTERNA TIONAL 2 FORM 1 15.20-NOM3 (1006) T ABLE OF CONTENTS FIG. 1 – VERTICAL UNITS ONL Y - YVC, YWC, YVF , YVS AIR FLOW FIG. 1 – VERTICAL UNITS ONL Y - YVC, YWC, YVF , YVS AIR FLOW Reference Documents: • IOM for YH (Horizontal Units) Form 1 15.
3 YORK INTERNA TIONAL INST ALLA TION FORM 1 15.20-NOM3 (1006) RECEIVING Material in this shipment has been inspected at the factory and released to the transportation agency in good condition. When received, a visual inspection of all cartons should be made immediately .
YORK INTERNA TIONAL 4 FORM 1 15.20-NOM3 (1006) INST ALLA TION WIRING All wirin g must comply wit h the lo cal and nation al code requirements . Units are provided with wiring diagram s and nameplate data to provide information required for necessary field wiring.
5 YORK INTERNA TIONAL INST ALLA TION FORM 1 15.20-NOM3 (1006) H L ( L 1 ) N ( L 2 ) P O W E R S U P P L Y G R D 1 2 3 4 1 2 3 4 T B 1 -1 T B 1- 2 T B 3 -1 T B 3 -2 T B 2 -2 T B 2 -4 T B 2 -3 T B 1 -4 .
YORK INTERNA TIONAL 6 FORM 1 15.20-NOM3 (1006) INST ALLA TION Many valve packa ges will not phys- ically allow all compon ents to fit over an auxiliary drain pan.
7 YORK INTERNA TIONAL INST ALLA TION FORM 1 15.20-NOM3 (1006) FIG. 7 - F AN COIL UNITS - DIRECT DRIVE, MODEL YVS & YVF 19 19-3/8 CONTROL ACCESS DOOR A RETURN AIR OPENING 8-1/8 8-1/8 1/2 1/2 1/2 DIA.
YORK INTERNA TIONAL 8 FORM 1 15.20-NOM3 (1006) INST ALLA TION FIG. 8 - F AN COIL UNITS - DIRECT DRIVE, MODEL YVC UNIT SIZES 10 & 12 Have two openings 2" apart centered on center line C L 16 2.
9 YORK INTERNA TIONAL INST ALLA TION FORM 1 15.20-NOM3 (1006) FIG. 9 - F AN COIL UNIT DIMENSIONS - DIRECT DRIVE, MODEL YWC LDO10324 GENERAL DIMENSIONS IN INCHES MODEL A C D E COIL CONN SIZE COOLING HEA TING 3 YWC 27-1/2 25-1/2 26-1/2 22-3/4 5/8 O.D. SWEA T 5/8 O.
YORK INTERNA TIONAL 10 FORM 1 15.20-NOM3 (1006) INST ALLA TION SUPPL Y & RETURN W A TER CONNECTIONS 1/2 DIA. MTG HOLES 2 EACH SIDE WIDTH HEIGHT RETURN AIR OPENING (RIGHT HAND UNIT SHOWN) (RIGHT HA.
1 1 YORK INTERNA TIONAL INST ALLA TION FORM 1 15.20-NOM3 (1006) F AN COILS ST ART - UP CHECKLIST Fan INSPECTION - The fan should be inspected and cleaned, in conjunction with maintenance of the motor and bearings. It is important to keep the wheel clean in order to avoid imbalance and vibration.
MAINTENANCE MOTOR The blower motor should be cleaned annually and if it has oiling ports, it should be oiled with a good grade of SAE 20 oil. Normally a few drops of oil in each bearing is sufficient. If motor service is required, it can be removed in the following manner: 1.
An important point after buying a device York YVC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought York YVC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data York YVC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, York YVC you will learn all the available features of the product, as well as information on its operation. The information that you get York YVC will certainly help you make a decision on the purchase.
If you already are a holder of York YVC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime York YVC.
However, one of the most important roles played by the user manual is to help in solving problems with York YVC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device York YVC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
