Instruction/ maintenance manual of the product 152 Yard Machines
Go to page of 24
Operator s Man ual IMPOR T ANT : READ SAFETY R ULES AND INSTR UCTIONS CAREFULL Y MTD PR ODUCTS INC. P .O . BO X 368022 CLEVELAND , OHIO 44136-9722 PRINTED IN U .
2 SECTION 1: IMPORTANT SAFE OPERATION PRACTICES WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR SNOW THROWER.
3 • If the snow thrower should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble. • Stop engine whenever you leave the operating position, before unclogging the collector/impeller housing or discharge guide, and making any repairs, adjustments, or inspections.
4 SECTION 2: FINDING YOUR MODEL NUMBER This Operator’s Manual is an important part of your new snow thrower. It will help you assemble, prepare and maintain your snow thrower.
5 SECTION 4: UNPACKING INSTRUCTIONS • See Figure 3. • Remove staples, break glue on the top flaps of the carton or cut tape at carton end and peel along top flap to open carton. Remove any loose parts included with unit (i.e., Operator’s manual, etc.
6 RAISING THE UPPER HANDLE 1. Loosen the hand knob on each side of the handle. See Figure 4. Remove packing material (if any). 2. Squeeze the control handle against the upper handle. Hold it in this position as you raise the handle. 3. Pull the handle up into the operating position.
7 INST ALLING THE CHUTE CRANK (Models 150 thru 152 and model 140 with Optional Extended Chute Crank only .) On some units, the chute crank can be installed and secured from the top side of the snow thrower.
8 SECURE FROM THE UNDERSIDE. See Figure 8. 1. Place a piece of the cardboard from the carton on a level surface. Tip the snow thrower forward so that the housing rests on the cardboard from the box. 2. Thread one 5/16” hex nut all the way onto the eyebolt.
9 FUEL AND OIL MIXTURE WARNING: Handle gasoline carefully. Remember that it is highly flammable. Never fill fuel tank indoors, when engine is running or while engine is still hot. Do not smoke when filling fuel tank. Your snow thrower uses a two cycle engine that requires a mixture of gasoline and two cycle engine oil.
10 SNO W THRO WER OPERA TING CONTROLS Figure 11 Auger Control Handle - Located on the upper handle, the auger control handle is used to engage and disengage the augers. See Figure 11. The snow thrower is designed to be propelled by the rotation of the augers.
11 SECTION 7: OPERATION Warning: Observe all warning labels on the snow thrower prior to use. See Section 1. FUEL MIXTURE Important: Mix oil with gasoline as instructed in the Oil and Fuel Recommendations Section in the separate Engine Operator’s Manual packed with your snow thrower.
12 SECTION 8: ADJUSTMENTS WARNING: NEVER attempt to clean chute or make any adjustments or repairs while engine is running. SHA VE PLA TE ADJUSTMENT Figure 13 1. To check the adjustment of the shave plate, place the unit on a level surface. See Figure 13.
13 SECTION 9: MAINTENANCE WARNING: NEVER attempt to clean chute or make any adjustments or repairs while engine is running. NOTE: Check engine and snow thrower frequently for loose nuts, bolts, etc.
14 SECTION 10: OFF-SEASON STORAGE WARNING: Never store engine with fuel in tank indoors or in enclosed, poorly ventilated areas where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer, or other gas appliance.
15 Model Nos. 140 150 E150 Model No. E152 REF . NO . PA R T NO . DESCRIPTION QTY . 1 710-1270 Screw—Ov al C-Sink L 1 2 710-1174 Bolt Carriage 2 3 712-0324 Nut Insl. Lock 1 4 720-0276 Knob—Handle 2 5 725-0157 Tie Cable 1 6 746-0883 Body—Le ver Control 1 7 747-0946 Handle Ass’y .
16 Model Nos. 140 150 E150 E152.
17 Model Nos. 140 150 E150 E152 REF . NO . PA R T NO . DESCRIPTION QTY . 1 710-0167 Bolt—Carriage 4 2 710-0276 Bolt—Carriage 1 3 710-0323 Screw—P an Head 1 4 710-0451 Bolt—Carriage 1 5 710-064.
18 REF . NO . PA R T NO DESCRIPTION QTY . 1 684-0056 Dash—21" 1 2 710-0442 Screw—He x 4 3 710-0895 Screw—He x T ap 2 4 710-1268 Screw—He x T ap 9 5 712-0252 Nut He x 1 6 712-0267 Nut—He.
19 Model Nos. 150 E150 REF . NO . PA R T NO DESCRIPTION QTY . 1 710-0442 Screw-He x 4 2 710-0653 Screw-He x W asher 1 3 710-1003 Screw-He x 1 4 710-1268 Screw-He x 12 5 712-0252 Nut-Jam 1 6 712-0267 N.
20 Model Nos. E152 REF . NO . PA R T NO DESCRIPTION QTY . 1 784-5572 Dash 1 2 710-0442 Scre w—Hex Cap 4 3 710-0653 Scre w—Hex W asher 1 4 710-1003 Screw—He x 2 5 710-1268 Screw—He x 8 6 712-02.
21 REF . NO . PA R T NO DESCRIPTION QTY . 1 710-0157 Screw—He x Cap 1 2 710-0442 Screw—He x Cap 4 3 710-0896 Screw—W asher 2 4 726-0205 Clamp—Hose 2 5 736-0242 Washer—Bell 5 6 750-0589 Spacer 4 7 750-0716 Spacer 1 8 751-0352 T ank—Fuel 1 Model Nos.
22 REF . NO . PA R T NO . DESCRIPTION QTY . 1 705-5139 Brac ket - Support Gas T ank 1 2 710-0157 Screw - He x Cap 1 4 710-0289 Screw - He x 2 5 710-0896 Screw - Washer 2 6 710-3025 Screw - He x Cap 4 .
23 REF . NO . PA R T NO DESCRIPTION QTY . 1 629-0236 Cord - Extension 110V3M 2 Prong 1 2 705-5139 Bracket - Support Fuel T ank 1 3 710-0157 Screw - Hex Cap 1 5 710-0289 Screw - Hex 2 6 710-0896 Screw .
MANUF A CTURER’S LIMITED W ARRANTY FOR: For TWO YEARS from the date of retail purchase within the United States of America, its possessions and territories, MTD PRODUCTS INC will, at its option, repair or replace, for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship.
An important point after buying a device Yard Machines 152 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yard Machines 152 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yard Machines 152 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yard Machines 152 you will learn all the available features of the product, as well as information on its operation. The information that you get Yard Machines 152 will certainly help you make a decision on the purchase.
If you already are a holder of Yard Machines 152, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yard Machines 152.
However, one of the most important roles played by the user manual is to help in solving problems with Yard Machines 152. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yard Machines 152 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
