Instruction/ maintenance manual of the product YSP600 SoundProjector Yamaha
Go to page of 98
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCAR BOROUGH, ONTARIO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , GERMANY YAMAHA ELECTRONIQUE FRANCE S.
IMPORTANT SAFETY INSTRUCTIONS i En ■ Explanation of Graphical Symbols The lightning flash w ith arrowhead symbol, within an equilateral tr iangle, is intended to alert you to the presence of unin su.
IMPORTANT SAFETY INSTRUCTIONS ii En FCC INFORMATION (fo r US customers) 1. IMPOR T ANT NOTICE: DO NO T MODIFY THIS UNIT! This prod uct, when ins talled as i ndicated in t he instru ctions contained in this ma nual, meets FC C requiremen ts.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT. iii En 1 T o assur e the finest perfo rmance, plea se read this manual carefull y . Keep it in a safe pl ace for fut ure refere nce.
PREP ARA TION INTRODUCTION BA S I C OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION SETUP English 1 En Overview ................ ......... ............. ............ ......... ...... 2 Featur es .......... ......... ............ .......... ..
Overvi ew 2 En It is generally accepted that in order to fully enjoy the benef its of su rround sound at home, you must endure the agon y of wiring and installing a great number of spea kers in the hop e that your listening room will gi ve you the same kind of surround sound experience as your local mo vie theater .
Features 3 En INTRODUCTION English Digital Sound Projector™ The Digital Sound Projector te chnology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surr ound sound, thus eliminates the need for satell ite loudsp eakers and cabling normally associated with con venti onal surround sound systems.
Features 4 En The “ ” logo and “IntelliB eam” are trademarks of Y amaha Corporatio n. Manufactured under licen se from Dolby Laboratori es. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “Neo:6” are registered trademarks of DTS, I nc.
Using this manual 5 En INTRODUCTION English • This manual describes how to connect and operate this unit. Fo r details re garding the operation of external compon ents, refer to the supplied owner’ s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
Supplied accessories 6 En Check that you hav e recei ved all of the follo wing parts. Supplied accessories STEREO MY SUR. MY BEAM SLEEP INPUTMODE CH LEVEL MENU RETURN TEST TV VOL VOLUME MUTE TV INPUT TV MUTE ENTER SUR.
Controls and functions 7 En INTRODUCTION English 1 INTELLIBEAM MIC jack Connect the supplied IntelliBeam microphone for A UTO SETUP (see page 33). 2 Front panel disp lay Shows in formation about the operational status of this unit. 3 Remote control sensor Receiv es infrared signals from the remote control.
Controls and functions 8 En 1 HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jack(s). 2 SRS T ruBass indicator Lights up when Tru Bass is turned on (see page 65). 3 EQU AL indicator Lights up when the TV volume equal mode is selected (see page 54).
Controls and functions 9 En INTRODUCTION English 1 HDMI OUT jack Connect to the HDMI input jack on your HDMI component such as a TV or a projector connected to this unit (see page 18). 2 D VD HDMI IN jack Connect your D VD player via an HDMI connection (see page 18).
Controls and functions 10 En This section describes the func tions of the remote control used to control t his unit. Some b uttons mark ed with an asterisk ( * ) share the common functions between the YSP and TV/A V operation modes ( N ).
Controls and functions 11 En INTRODUCTION English H MA CRO Use to set the TV macro (see page 80). I SLEEP Sets the slee p ti mer (see page 55). J INPUTMODE T oggles between input modes (A UT O, DTS, and AN ALOG) (see page 73). K Beam mode buttons Change the beam mode setti ngs (see pages 45, 51, and 52).
Controls and functions 12 En This section describes the func tions of the remote control used to control other com ponents when the TV/A V mode is selected with the opera tion mode selector ( 4 ). 1 Numeric buttons Enter numbers. 2 Cursor bu ttons / / / , ENTER Use to select D VD menu items.
Installatio n 13 En PREP ARA TION English This section describe s a suitable installation location to install this u nit using a rack. Depending on your installa tion en vironment, connections with external components can be done before installing this unit.
14 En Installatio n ■ Installat ion examples Example 1 Install this unit as close to the ex act center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflec ted of f the w alls. Example 3 Install this unit as close to the e xact front of your normal listening position as possible.
15 En Installatio n PREP ARA TION English ■ Using a rac k Install this unit under your TV in a commercially av ailable rack. Make sure that the rack is large enough to allow adequate ventilation space around this unit (see page 13) and that it is strong enough to support the weight of both this unit and your TV .
Connec tions 16 En This unit is equipped with the f ollo wing type s of audio/video input/ output jacks/terminal: For audio inp ut • 2 optical digi tal input jacks • 1 coaxial digital input jack .
17 En Connections PREP ARA TION English ■ Cables us ed for con nections HDMI cable A udio pin cab le (supplied) Optical cable (supplied ) Digital audio pin cable (supplied) Subwoof er pin cab le Sys.
18 En Connec tions This unit is equipped with 2 HDMI input jacks and 1 HDM I output jack. If your TV and other components hav e HDMI jacks, use HDMI cables for simpler and easier c onnections, and you can skip the conne ction procedures from page 19 to 21.
19 En Connections PREP ARA TION English For audio connection, connect the anal og audio output jacks on your TV to th e TV/STB A UDIO IN PUT jacks on this unit. If your TV has an optical digital output jack , connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGIT AL INPUT jack on this unit.
20 En Connec tions Connect the coaxial di gital output jack on your D VD player/recorde r to the D VD COAXIAL DIGIT AL INPUT jack on this unit. When you connect this unit to your D VD/VCR co mbo playe.
21 En Connections PREP ARA TION English Connect the optical digital output jack on your digital sate llite tuner or cable TV tu ner to the TV/STB OPTICAL DIGIT A L INPUT jack on this uni t. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB A UDIO INPUT jacks on this unit.
22 En Connec tions Connect the TV/STB A UDIO INPUT jacks on this unit to the analog audio output jacks on your TV . Connect the optical digital output jack on your digital airw av e tuner to the TV/STB OPTICAL DIGIT AL INPUT jack on this unit in addition to the analog audio conne ction.
23 En Connections PREP ARA TION English T o connect a VCR, connect the analog audio output jacks on your VCR to the VCR A UDIO INPUT jacks on this unit.
24 En Connec tions If your component supports optic al digital connections, conne ct the optical digital out put jack on your component (e.g., D VD player/record er) to the A UX OPTICAL DIGIT AL INPUT jack on this unit.
25 En Connections PREP ARA TION English Connect the monaural input jack o n your s ubwo ofer to the SUBWOOFER jack on this unit. This connection alone does not output sound from the c onnected subwoofer .
26 En Connec tions Once all other connections are complete, plug the A C power su ppl y cable into the AC w all outlet. Connecting the AC pow er supply cable T o the A C wall outlet.
GETTING STARTED 27 En SETUP English 1 Press and hold the mark on the battery cover and then open the cover . 2 Insert the two supplied batteries (AA, R6, UM-3) into the ba ttery compartment. Make sure you insert the batteries according to the polarity markings (+/–).
Getting started 28 En 1 Press ST ANDBY/ON to turn on the po wer of this unit. The volume le vel appears in the front panel display , and the current input sour ce and beam mode are displayed. 2 Press ST ANDBY/ON again to set this unit to the standb y mod e.
USING SET MENU 29 En SETUP English This section describes how to display the OSD ( on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your o wn home.
Using SET MENU 30 En The follo wing diagr am illustrates th e ov erall flo w of the setup procedure. The flow chart of SET MENU Run A UTO SETUP (IntelliBeam). See “ A UTO SETUP (Inte lliBeam)” on page 32. Look for a remedy . See “Error messages for A U T O SETUP” on page 38 for a complete list of error messages and possible remedies.
CHANGING OSD LANGUAGE 31 En SETUP English This feature allo ws you to select the language of your choice that appears in SET ME NU of this unit. 1 Set the operat ion mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV . y • The control buttons used for SET MENU are displayed at the bottom of the screen.
AUTO SETUP (INTELLIBEAM) 32 En This unit creates a sound f ield b y re flecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as yo u would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.
AUTO SETUP (I ntelliBeam) 33 En SETUP English The supplied IntelliBeam micro phone collects and analyzes the sound that th is unit produces in your actual listen ing en vironment.
AUTO SETUP (IntelliBea m) 34 En ■ Assembling th e supplied car dboar d microp hone stand Y ou will find three separate pa rts (one circular part and two longitudinal parts) of th e cardboar d microphone stand originally put together . 1 Disassemble the three pa rts of the cardboar d microphone stand ori ginally put togeth er .
AUTO SETUP (I ntelliBeam) 35 En SETUP English • Make sure that your listening r oom is as quiet as possible while this unit is performing the A UTO SETUP procedure.
AUTO SETUP (IntelliBea m) 36 En 5 Press / to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ only, or SOUND OPTIMZ only and then press E NTER. The following screen ap pears on your TV .
AUTO SETUP (I ntelliBeam) 37 En SETUP English 8 Check that the f ollo wing screen is displa yed on y our TV . The results of the A UTO SETUP procedure are displayed on your TV . y • If “ENVIRONMENT CHECK [F AILED] ” is displayed, we rec ommend runn ing the A UTO SETUP procedure again.
AUTO SETUP (IntelliBea m) 38 En ■ Error messa ges for A UT O SETUP Before the A UTO SETUP pr ocedure starts While the A UT O SETUP pr ocedure is in pr ogress If one of the errors listed below ex cept E-1 is displayed, press RETURN.
USING THE SYSTEM MEMORY 39 En SETUP English Y ou can save the current settings adju sted in SET MENU in the system memory of this unit. It is handy to sa ve certain settings according to the v arying conditions of your listening en vironment.
Using the system memory 40 En 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The following screen ap pears on your TV . 6 Press ENTER again. The new parameters are sa ved as MEMOR Y1, MEMOR Y2, or MEMOR Y3. Once the parameters are saved, the display returns to the SE T MENU screen.
Using the system memory 41 En SETUP English 4 Press / to select LO AD and press ENTER. The follo wing screen appears on your TV . 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The follo wing screen appears on your TV . 6 Press ENTER again.
PLAYBACK 42 En Y ou can play back sound from the components connected to this unit simply b y pres sing INPUT on the front panel repeatedly or pressing one of the input selector buttons (STB, VCR, D VD, A UX, or TV) on the remote control.
43 En Playback BA S I C OPERA TION English Press VCR to play back a VCR. Press A UX to play back a componen t connected to the A UX jac k on the r ear panel of this unit. Once an input source is se lected (see page 42), you can play back the selected input source.
44 En Playback Press V OLUME +/– to increase or decrease the volume level. The numeric value of the volume lev el appears in the front panel display . Control range: MIN (minimum), 01 to 99, MAX (maximum) • The volume lev el of all inpu t sources (including multi-channel as well as stereo sources) changes at the same time.
ENJOYING SURROUND SOUND 45 En BA S I C OPERA TION English Y ou can enjoy multi-channel sur round sound b y changing the be am mode using the beam m ode b uttons on the remote control. Select 5 Bea m, Stereo plus 3 Beam, 3 Beam, or My Su rroun d for multi-channel playback.
46 En Enjoying surround sound Outputs normal sound from the front left and r ight channels and sound beams from the center and surround left and right channels.
47 En Enjoying surround so und BA S I C OPERA TION English ■ Decoder indicator s Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: y • Y ou can select an input mode (AUT O, DTS, or ANALOG) by pressing INPUTMODE repeatedly (see page 73).
48 En Enjoying surround sound This unit can decode 2-cha nnel sources for 5.1-channel playback so that you can enjoy a v ariety of surround sound effects b y switching the sur round mode. y The beam mode must be set to 5 Beam, St ereo plus 3 Beam, or 3 Beam (see page 45).
49 En Enjoying surround so und BA S I C OPERA TION English Y ou can enjoy analog audio signals output fro m your TV in real surround sound. y Before performing the steps below , set the volume of this unit to 30. 1 Select the TV c hannel y ou want to watc h.
50 En Enjoying surround sound Y ou can configure the parameters for Dolb y Pro Logic II Music and DTS Neo:6 Music to f ine-tune the surround sound effect. 1 Repeat step s 1 and 2 in “Enjo ying 2-c hannel sour ces in surroun d sound” on page 48 and select PL II Music or Neo:6 Music.
ENJOYING STEREO SOUND 51 En BA S I C OPERA TION English Y ou can enjoy 2-channel stereo playback as the beam modes by pressing STER EO on the remote control. Sounds are output from the front right and left channels . This is ideal for pla ying back hi-fi sour ces, such as CDs, and can be used to replace your TV speakers.
PLAYING BACK SOUND CLEARLY (MY BEAM) 52 En Y ou can improv e listenability in a noisy en vironment by ch anging the beam mode to My Beam, which outputs sound beams directl y tow ard the listening p osition in a single c hannel.
53 En Playing back sound clearly (My Beam) BA S I C OPERA TION English Y ou can adjust the beam a ngle manually while playing back an input source. This f unction is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function.
USING THE VOLUME MODE (NIGHT LISTEN ING ENHANCER /TV VOLUME EQUAL MODE) 54 En The night listening enhanc ers are de signed to impro ve li stenability at l o wer volu mes or at night. In addition, you can limit the v olume le vel of the TV so that it will not v ary sudde nly to a great extent whene v er the contents being broadcast change (i.
USING THE SLEEP TIMER 55 En BA S I C OPERA TION English Use this feature to automa tically set this unit to the standb y mode after a speci fied perio d of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playi ng back a source.
56 En Using the sleep timer ■ Canceling the sleep timer 1 Set the operation mode selector to YSP. 2 Press SLEEP repeatedly until “SLEEP OFF” appear s in the fr ont panel disp lay . 3 W ait f or a few seconds without operating this unit to confirm the setti ng for the sleep timer .
USING THE HDMI CONTROL FEATURE 57 En BA S I C OPERA TION English Y ou can operate the following functions using the remote control supplied wi th your TV if this unit and an HDMI control-compatible TV (e xcept so me models) are connected via HDMI.
MANUAL SETUP 58 En T o achie ve the best quality surro und sound, you can use M ANU AL SETUP to fine-tune the listening en vironment parameters, as well as to ma k e advanced settings for sound signals, sound be ams, digital i nput, and the OSD.
59 En MANUAL SETUP AD V ANCED OPERA TION English Use the remote control to acce ss and adjust each parameter . y Y ou can adjust the SET MENU parameters while the unit is reproducing sound . 1 Set the operat ion mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV .
60 En MANUAL SETUP Use to manually adjus t the va rious parameters related to the sound beam ou tput. SET MENU → MANU AL SETUP → BEAM MENU y Y ou can adjust the sound beam ou tput lev el of each channel in “ Adjusting the audio balance” (see page 70).
61 En MANUAL SETUP AD V ANCED OPERA TION English • Select ANGL E TO W ALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listen ing room as well as the distance of the listening positi on from this unit.
62 En MANUAL SETUP BEAM TRA VEL LENGTH (Beam travel length) A certain amount of delay mu st be applied to the sound from each channel so that al l sounds can arri ve at the listening position at the same time .
63 En MANUAL SETUP AD V ANCED OPERA TION English TREBLE GAIN (T reble gain) Use to adjust the high-frequency output le vel of each channel. y If the reflection points of the front left and right or su.
64 En MANUAL SETUP Use to manually adjus t the va rious parameters related to the sound output. SET MENU → MANU AL SETUP → SOUND MENU ■ T ONE CONTR OL (T one control) Y ou can adjust the tonal quality of sound beams. TREBLE (T reble) Use to adjust the high-frequency response.
65 En MANUAL SETUP AD V ANCED OPERA TION English ■ A UDIO DELA Y (Audio dela y) Use to delay the sound output and synchronize it with the video image.
66 En MANUAL SETUP Use to manually adjus t the va rious parameters related to the audio and video input. SET MENU → MANU AL SETUP → INPUT MENU ■ INPUT MODE (Input mode) Use to designate the input mode for the input sources connected to the DIGIT AL INPUT jacks when you turn on the po wer of t his unit.
67 En MANUAL SETUP AD V ANCED OPERA TION English ■ INPUT RENAME (Input rename) Use to change the name of the input source in the OSD and the front panel di splay . Press an input select or button (e.g., D VD) to select the comp onent you want to change the name for and perform the following procedure.
68 En MANUAL SETUP A UDIO SELECT (A udio select) Use this feature if your play er/tuner connected to one of the HDMI jacks o n this unit outpu ts multi-channel audio source in 2-channel.
69 En MANUAL SETUP AD V ANCED OPERA TION English Use to manually adjust the v arious parameter s related to the display . SET MENU → MANUAL SETUP → DISPLA Y MENU ■ F .DISPLA Y SET (Front panel disp lay settings) Use to adjust the brightness and display settings of the front panel display .
Adjusting the audio balance 70 En Y ou can adjust the sound beam output level of each channel b y using the test tone or the a udio output being played back in each beam mode to achie v e a more true-to-life surround sound e xperience.
71 En Adjusting the audio balance AD V ANCED OPERA TION English 5 Press TEST when you have completed all your adjustments. • All channel levels cannot be ad justed when the stereo playback (see page 51), My Beam (see page 52), or My Surrou nd (see page 46) is selected as the beam mode.
72 En Adjusting the audio balance 3 Press / to adjust the channel v olume. Control range: –10.0 dB to +10.0 dB 4 W ait f or a few seconds without operating this unit when yo u have complet ed your adjustment .
Selecting the input mode 73 En AD V ANCED OPERA TION English Y ou can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is a v ailable for TV/STB, D VD, and A UX.
Adjusting the system pa rameters 74 En This unit has additional menus th at are displayed in the front panel disp lay . These menus offer add itional operations to adjust and customize the way this unit operates. When “F .P ANEL KEY ” is set to “F .
75 En Adjusting the system parameters AD V ANCED OPERA TION English 7 Press ST ANDBY/ON on the remote control to set this unit to the standby mode. The ne w setting will be acti v ated when you tu rn on the power of this unit ne xt time.
Remote control features 76 En In addition to controlling this unit, th e remote control can also operate other A V components made by Y amaha and other manufacturers. T o control othe r components, you must set up the remote cont rol with the appropriate remote control codes and set the operation mode selector to TV/A V to change the control area.
77 En Remote control features AD V ANCED OPERA TION English ■ Operating y our TV Set the operation mode se lector to TV/A V, and press TV to select TV as the input source. The control area of the remote control changes to the TV operation mode. 1 Numeric buttons Selects a TV channel for playback.
78 En Remote control features ■ Operating y our DV D play er/recor der Set the operation mo de selector to TV/A V and press DVD to select D VD as the inp ut source. The control area of the remote control chan ges to the D VD operation mode. 1 Numeric buttons Enter numeric digits.
79 En Remote control features AD V ANCED OPERA TION English ■ Operating y our VCR Set the operation mode se lector to TV/A V and press VCR to select VCR as the input source. The control ar ea of the remote control changes to the VCR operation mode. 1 Numeric buttons Enter numeric digits.
80 En Remote control features The TV macro feature makes it possible to perform a series of operations with th e press of a single b utton. For example, when you want to play a D VD, you would normally turn on the component, select D VD as the input source, and press the play b utton to start playback.
81 En Remote control features AD V ANCED OPERA TION English ■ Setting macr os f or the TV without the tuning capabi lity 1 Press and hold CODE SET and press one of the input selector buttons to select the input source y ou want to set macr os for . Proceed to step 2 while holding do wn CODE SET.
Troubleshooting 82 En Refer to the chart belo w when this unit does not function p roperl y . If the problem you are e xperiencing is not listed belo w or if the instruc tion belo w does not help, set this unit t o th e standb y mode, disconnect the A C po wer supply cable, and contact the nearest authorized Y a maha dealer or service center .
83 En Troubleshooting ADDITIONAL INFORMA TION English Prob lem Cause Remedy See page No sound from the subw oof er . B ASS OUT in SUBWOOFER S ET is set to FR ONT. Select SW FR. 64 The source d oes not contai n low bass signals. Distorted or too little bass sound.
84 En Troubleshooting ■ Remote cont ro l ■ HDMI Problem Cause Remedy See page The remote con trol does not work and/or function properly . Wrong dis tance or angl e. The remote control func tions with in a maximum rang e of 6 m (20 f t) and no mo re than 30 de grees of f-ax is from the fro nt panel.
Glossary 85 En ADDITIONAL INFORMA TION English ■ Dolb y Digital Dolby Digital is a digital surround sound system that giv es you completely independent mu lti-channel audio. W ith 3 front channels (left, center , and right) and 2 surround stereo channels, Dolb y Digita l pro vides 5 full-range audio channels.
86 En Glossary ■ LFE 0.1-c hannel This channel is for the reproduction of lo w bass signals. The frequenc y range for this channel is 20 Hz to 1 20 Hz. This channel is counted as 0. 1 because it only enforces a low-frequenc y range compared to the full-range reproduction by the other 5/6 ch ann els in Dolby Digital or DTS 5.
Index 87 En ADDITIONAL INFORMA TION English ■ Numerics 3 Beam ............ ........... ........... ......... ........... ........... ........... 46 5 Beam ............ ........... ........... ......... ........... ........... ........... 45 ■ A A C po wer supply cable .
Specifications 88 En AMP SECTION • Maximum Output Po wer ...................... ................... ........ 2 W (1 kHz, 10% THD, 4 Ω ) × 16 15 W (100 Hz, 10% THD, 4 Ω ) × 2 SPEAKER SECTION •D r i v e r Small dia. spea kers .................
89 En Limited Guarantee f or Eur opean Economic Area (EEA) and Switzerland Thank you for having chosen a Y amaha prod uc t. In the unlikely event that your Y amaha product needs guarant ee service, please co ntact the dealer from whom it was purchased.
i List of remote control codes TV ADMIRAL 292, 293, 216 AIW A 294, 276, 283, 284 AKAI 295, 296 ALB A 296 A OC 297 BELL & HOWELL 292 BEST AR 298 BLA UPUNKT 229, 222 BLUE SKY 298 BRANDT 223 BROC SON.
ii MOT OR OLA 748 OAK 739, 742, 743 P ANASONIC 744, 745, 746, 747, 783, 784 PHILLIPS 763, 764, 765, 766, 767, 768 PIONEER 748, 785, 747 RADIO SHA CK749 SCIENTIFIC A TLANT A 752, 753, 754 SONY 756, 757.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCAR BOROUGH, ONTARIO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , GERMANY YAMAHA ELECTRONIQUE FRANCE S.
©2008 All rights reserved. Printed in Malaysia WN77830 [En] R L VCR TV/STB VIDEO TV/STB AUX OPTICAL COAXIAL DIGITAL INPUT OUT AUDIO INPUT DVD S YSTEM CONNECTOR SUBWOOFER HDMI OUTPUT HDMI INPUT ANALOG.
3 2 1 SLEEP INPUTMODE 5BEAM ST+3BEAM 3BEAM VOL MODE AUT O SETUP MACR O TV INPUT2 INPUT1 TV Subwoofer AUTO SETUP START Will begin in 10sec Please leave the room **-------- [RETURN]:Cancel AUTO SETUP PREPARATION & CHECK Please connect the MIC. Please place the MIC at least 1.
An important point after buying a device Yamaha YSP600 SoundProjector (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha YSP600 SoundProjector yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha YSP600 SoundProjector - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha YSP600 SoundProjector you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha YSP600 SoundProjector will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha YSP600 SoundProjector, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha YSP600 SoundProjector.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha YSP600 SoundProjector. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha YSP600 SoundProjector along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
