Instruction/ maintenance manual of the product YHT-470 Yamaha
Go to page of 18
IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.
3 As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only.
• Before making any connections, switch OFF the power to the unit and the amplifier or other component. • Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals.
FRONT P ANEL 5 IDENTIFICA TION OF COMPONENTS REMO TE CONTROL TRANSMITTER * The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions below.
1 2 3 4 Display information at disc play ➀ Shows the track number to be played. ➁ Shows the time displays. (Refer to “Selecting time displays” on page 8.) ➂ Displays the numbers that correspond to the numbers of tracks (as high as number 20) on the disc.
* To resume play, press the PAUSE button again or press the PLAY button. 7 T o stop play temporarily T o stop play completely T o play a desired trac k on the disc DIRECT PLAY Select a desired track using the numeric button. Example: To select track 25 Press ➀ twice, then immediately press ➁ once.
8 Selecting time displays You can select any of the four time displays by pressing the TIME display modeselect button. Note The remaining time ➁ will not be displayed for track number 25 or higher. Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the MODE button.
9 RANDOM-SEQUENCE PLA Y You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer. To perform random-sequence play To cancel random-sequence play Notes • This feature will not function during programming, or during programmed play.
1 Stop the unit. 2 3 Select the desired track. * Repeat step 3 to set more programs. You can select the same track again. 4 10 PR OGRAM PLA Y You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be programmed for a disc.
11 1 Select a track which has index numbers. 2 3 Select the desired index number. Notes • Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts.
1 Stop the unit. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 15.) 2 Enter the tape’s total possible recording time. You can select any of four tape lengths by pressing the TAPE button.
13 1 Follow steps 1 – 3 on page 12. 2 3 Select the track numbers (to be recorded on side A) in the desired order. * Programmed track numbers are illuminated on the display.
1 Follow steps 1 – 3 on page 12. 2 * The unit will automatically program tracks for side A and side B separately considering the tape’s total time. 3 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 4 The unit will pause at the end of side A of the tape.
15 A utomatic searc hing of the peak level on a disc This convenient feature automatically searches the part on a disc where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes • Use only AA, R6, UM-3 batteries for replacement. • Be sure the polarities are correct.
SYMPTOM The player does not switch ON when the POWER switch is pressed. The disc tray does not close completely. The DISC indicator does not illuminate. Play does not begin. Play is delayed, or begins at the wrong place. No sound. Sound “skips”. Sound “hums”.
VQ02270-0 Printed in Japan BWWR, BB Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER AVE., SCARBOR OUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H.
An important point after buying a device Yamaha YHT-470 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha YHT-470 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha YHT-470 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha YHT-470 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha YHT-470 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha YHT-470, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha YHT-470.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha YHT-470. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha YHT-470 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
