Instruction/ maintenance manual of the product YHT-380 Yamaha
Go to page of 13
O WNER’S MANU AL MODE D’EMPLOI BEDIENUNGSANLEITUNG BR UKSANVISNING MANU ALE DI ISTR UZIONI MANU AL DE INSTR UCCIONES GEBR UIKSAANWIJZING Natural Sound Stereo Integrated Amplifier Préampli/ampli d.
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC. Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE. Diese Geräte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG.
1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold.
4 CONNECTIONS • Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made.
5 English Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut to be as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed.
6 1 Set to the “ ∞ ” position. 2 3 Select a desired input source. * The indicator corresponding to the selected input source will illuminate. * Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel.
7 English 1 Select the source to be recorded. * To dub from tape to tape, refer to the “ Notes ” shown at right. * When you select AUX , TUNER , CD or PHONO , be sure that TAPE 1 and/or TAPE 2 are not also selected. 2 Play the source and then turn the VOLUME control up to confirm the input source.
Using the CD DIRECT switc h You can enjoy the purest possible sound from your CD input source by setting this switch ON. By doing so, the CD audio signal bypasses the BASS , TREBLE , BALANCE and LOUDNESS controls, eliminating any alterations to the audio signal.
9 English REMO TE CONTROL TRANSMITTER The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit.
10 NO TES ABOUT THE REMO TE CONTR OL TRANSMITTER Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement.
11 English If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help.
12 SPECIFICA TIONS Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.04% THD....................55W+55W 6 ohms, 20 Hz to 20 kHz, 0.06% THD [Except Scandinavia model] .................................60W+60W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms .
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-2084 RELLINGEN BEI HAMBURG, F.
An important point after buying a device Yamaha YHT-380 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha YHT-380 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha YHT-380 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha YHT-380 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha YHT-380 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha YHT-380, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha YHT-380.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha YHT-380. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha YHT-380 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
