Instruction/ maintenance manual of the product STAGEPAS 250M Yamaha
Go to page of 2
Remove the mixer 1 Be sure that the mixer ’ s power switch is turned off. 2 Use a screwdriver or coin to turn each screw on the mixer from LOCK to OPEN until it clicks.
1 2 3 4 5 6 9 ) º ¡ ! @ 8 7 ^ $ # % * ( £ ™ & º CLICK switch (for headphones) Set this switch to ON to assign the click/metronome sounds to only the PHONES jack when the CLICK switch at the channel 7/8 is ON.
An important point after buying a device Yamaha STAGEPAS 250M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha STAGEPAS 250M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha STAGEPAS 250M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha STAGEPAS 250M you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha STAGEPAS 250M will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha STAGEPAS 250M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha STAGEPAS 250M.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha STAGEPAS 250M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha STAGEPAS 250M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
