Instruction/ maintenance manual of the product SLG-120NW Yamaha
Go to page of 16
1 Thank you for pur chasing the Y amaha Silent Guitar . In or der to obtain the maxi- mum performance and enjoyment fr om your Silent Guitar , we ur ge you to r ead this Owner’ s Manual thor oughly befor e using the instrument. Please keep this Owner’ s Manual in a safe place for later r eference .
2 SPECIAL MESSAGE SECTION 92-BP This product utilizes batteries or an external power supply (adaptor). DO NOT connect this product to any power supply or adaptor other than one described in the manual, on the name plate, or specifically recommended by Yamaha.
3 Your Silent Guitar will give you years of reliable service if you follow the simple rules given below: ■ Location Do not expose it to the following conditions to avoid deformation, discoloration, or more serious dam- age. • Direct sunlight (e.g.
4 Main Body/Accessories After opening the pac kaging, please check that all the par ts listed below are in- cluded. • Main body • Left frame • A C adaptor : P A-D09 • Stereo earphones • Soft case * SLG-120NW only 02_slg100n_120nw_en.pm65 06.
5 Nomenclature ● Fr ont ● Rear Fingerboard Neck Saddle T uning peg Nut Body Pickup (underneath the saddle) Controls → See page 6. F rame attachment screw 1 (Doubles as the strap pin) Left frame .
6 ● Contr ols V OLUME control Batter y compartment REVERB switch PO WER lamp A UX IN jack A UX IN lev el control Cord hook LINE OUT jack DC-IN jack (Power adaptor connector) DC-IN 9~12V + – BASS c.
7 When shipped from the f actor y , the left frame is not attached to the Silent Guitar’ s main body . Before using the instrument, please properly attach the left frame using the proce- dure described below . • After the frame is attached, make sure attachment screws 1 and 2 are tightened firml y .
8 T uning Use a tuning meter , pitch pipe, tuning f ork, piano , etc., and tune the open str ings to the pitches shown belo w . • If the string ’ s pitch is high, loosen the string until the string ’ s pitch is slightly lower than the tuning pitch, then tune while raising the string ’ s pitch.
9 Changing Strings 1. Thread the string through the corresponding string hole on the bridge, then tie the string as sho wn in the illustration below . After tying the knot, pull both ends of the string to make the knot f irm on the bridge. 2. Next, tie the strings to the pe gs.
10 Power Supply The Silent Guitar operates either on battery power or with an A C adaptor howe v er , it will consume more po wer when the rev erb function is in use. For that reason, we recommend that it be po wered with the supplied AC po wer adaptor for normal use.
11 Using the Contr ols ■ Using the LINE OUT jack (Using with a guitar amplifier or powered speaker , etc.) 1. Use a standard phone plug cable to connect the Silent Guitar’ s LINE OUT jack to the input jack on the guitar amplifier or po wered speaker , etc.
12 3 LINE OUT A UX IN PHONES DC-IN LINE OUT AUX IN AUX VOL MIN MAX AC POWER ADAPTOR : YAMAHA P A-1E OR PA-3C OR PA-D09 BATTERY : 9V 6LR61 OR 6F22 MADE IN INDONESIA SILENT GUITAR MODEL SLG-100N N89 OPEN LINE OUT AUX IN AUX VOL MIN MAX THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
13 ■ A UX IN jac k • The A UX IN jack can be used to connect an external stereo signal source to the Silent Guitar . Connecting the audio output of a CD player , cassette player, etc. to the instrument allo ws you to play along with the external audio source.
14 When putting the Silent Guitar into the supplied soft case , remove the left frame from the Silent Guitar , and then place in the individual par ts in the case as shown in the illustration belo w . • Put the left frame into the case ’ s larger pocket.
15 Specifications Neck Mahogan y Body Maple Fingerboard Rose wood (SLG-120NW : Ebon y) Bridge Rosewood Frame Unit Maple (SLG-120NW : Rosewood/Maple) Strings Nylon Guitar Strings Sensors B-BAND Connect.
WH98220 R0 Pr inted in Indonesia 07_slg100n_120nw_last.pm65 06.7.26, 10:27 AM 4.
An important point after buying a device Yamaha SLG-120NW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha SLG-120NW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha SLG-120NW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha SLG-120NW you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha SLG-120NW will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha SLG-120NW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha SLG-120NW.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha SLG-120NW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha SLG-120NW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
