Instruction/ maintenance manual of the product RX-V575BL Yamaha
Go to page of 112
English AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit..
En 2 CO N T E N T S Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES 5 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
En 3 Playing back music stored on media servers (PCs /NAS) . . . . . . . . . . . . 54 Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories En 4 Ac cessories Check that the following accessories are supplied with the product. Remote control Batteries (AAA, R03, UM-4) (x2) AM antenna FM antenna *One of the above is supplied depen ding on the region of purchase.
FEATURES ➤ What you can do with the unit En 5 FEA TURES Wha t you can do with the unit A V receiver (the unit) Speakers BD /D V D playe r HDMI Control Audio/Video Audio/Video (via HDMI or MHL) TV remote control Aud i o HDMI Control Aud i o Audio/Video TV Sequential operation of a TV , A V receiver , and BD/D VD play er (HDMI Control) .
FEATURES ➤ What you can do with the unit En 6 F ull of useful func tions! ❑ Connecting various devices (p .23) A number of HDMI jacks and various inp ut/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio de vices (such as CD players), game consoles, camcorders, and other devices.
FEATURES ➤ Part names and functions En 7 Fro nt p an el 1 z (power) key T urns on/of f (standby) the u nit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.74) • Standby Through is enabled (p.
FEATURES ➤ Part names and functions En 8 Fr ont display (indicators) 1 HDMI Lights u p when HDMI s ignals are being in put or output . OUT Lights up when HDMI signals are being out put. 2 CINEMA DSP Lights up when CINEMA DSP (p.38) is working. CINEMA DSP n Lights up when CINEMA DSP 3D (p.
FEATURES ➤ Part names and functions En 9 Rear panel 1 HDMI OUT jack For connecting to an HDMI-compatible TV and output ting video/audio signals (p.18). When using ARC, TV audio signal can also be input throu g h the HDMI OUT jac k. 2 HDMI 1–4 jacks For connecting to HDMI-compatible playba ck devices and inputting video/audio signals (p.
FEATURES ➤ Part names and functions En 10 Remote control 1 Remote control signal transmitt er T ransmits infrar ed signals. 2 SOURCE z key T urns on/off an external device. SOURCE/RECEIVER key Changes the device (the unit or external device) that is operated with the r emote control (p.
PREPARATIONS ➤ General setup procedure En 11 PREP ARA TIONS This completes all the preparations. Enjoy playing movies, music, ra dio and other content with the unit! General se tup proc edure 1 Placing speakers (p .12) Select the speaker layout for the n umber of speaker s that you are using and place them in your r oo m.
PREPARATIONS ➤ Placing speakers En 12 Select the speaker layout for the num ber of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. * RX-V575 only • RX-V575 suppor ts 2- to 7.
PREPARATIONS ➤ Placing speakers En 13 7.1-channel system (RX -V575 only) 6.1-channel system (RX -V575 only) 5.1- channel sy stem 4.1- channel sy stem 45 1 2 3 99 67 30 cm (1 ft) or more 10° to 30°.
PREPARATIONS ➤ Placing speakers En 14 3.1-channel system 2.1-channel system ■ Setting the sp eak er impedance (U.S.A. and Canada models only) Under its default settings, the unit is conf igur ed for 8-ohm speakers. When connecting 6-ohm speakers, set the sp eaker impedance to “6 Ω MIN”.
PREPARATIONS ➤ Connecting speakers En 15 Connect the speakers placed in your room to the unit. The following diagrams provide connections for 5.1- and 7.1-channel systems as examples. For other systems, connect speakers while referring to the connection diagram for the 5.
PREPARATIONS ➤ Connecting speakers En 16 ■ Connecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) ter minal of the unit and the speaker , and the other is for the positive (+) ter minal.
PREPARATIONS ➤ Input/outpu t jacks and cables En 17 ■ V ideo/audio jacks ❑ HDMI jacks T ransmit digital video and digi tal sound through a single jack. Use an HDMI cable. • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.
PREPARATIONS ➤ Connecting a TV En 18 Connect a TV to the unit so that video input to the unit can be outp ut to the TV . Y ou can also enjoy playback of TV audio on the unit. The connection method varies depending on the functions and video input jacks available on your TV .
PREPARATIONS ➤ Connecting a TV En 19 ❑ Necessary settings T o use HDMI C ontr ol a nd ARC, you need to configur e the following settings. For details on settings a nd operating your TV , refer to the instruction manual for the TV .
PREPARATIONS ➤ Connecting a TV En 20 ■ Connection Method 2 (HDMI Contr o l-compat ible T V) Connect the TV to the unit with a n HDMI cable and a digital optical cable. • The following e xplanation is based on the assumption that y o u ha ve not changed the “HDMI” parameters (p.
PREPARATIONS ➤ Connecting a TV En 21 3 Configure the settings for HDMI Contr ol. a Enable HDMI Control o n the TV and playback de vice s (such as a HDMI Control-compatib le BD/D VD play er). b T ur n off the TV’s main pow er and then tu rn off the unit and pla y back de vice s .
PREPARATIONS ➤ Connecting a TV En 22 ■ Connection Method 4 ( TV wit hout HDMI input jacks) When connecting any video device to the A V 1–2 (COMPONENT VIDEO) jacks of the unit, connect the TV to the MONITOR OUT (COMPON ENT VIDEO) jacks.
PREPARATIONS ➤ Connecting playback devices En 23 The unit is equipped with a variet y of inpu t jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage de vice, see the following pages.
PREPARATIONS ➤ Connecting playback devices En 24 ■ Component video connection Connect a video device to the unit with a component video cable and an audio cable (digital optical or digital c oaxial). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device.
PREPARATIONS ➤ Connecting playback devices En 25 ■ Changing the combination of video/audio input jacks If the combination of video/audio input ja ck s available on the unit does not match your video device, change its combination according to the output jacks of your device.
PREPARATIONS ➤ Connecting playback devices En 26 Co nnecting audio devices (such as CD pla yers) Connect audio devices such as CD p layers and MD players to the unit. Depending on the audio output jacks available on your aud io device, choose one of the follow ing connections.
PREPARATIONS ➤ Connecting the FM/AM antennas En 27 Connect the supplied FM/AM antennas to th e unit. Fix the end of the FM antenna to a wall, and place the AM ante nna on a flat surface. Assembling and connectin g the AM antenna • Unwind only the length of cable needed from the AM antenna unit.
PREPARATIONS ➤ Connecting to a network En 28 Connect the unit to your router with a comme rcially-available STP network cable (CA T -5 or higher straight cable). Y ou can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS ), on the unit.
PREPARATIONS ➤ Connecting recording devices En 29 Y ou can connect video/audio recor d ing devices to the A V OUT jacks. These jacks output analog video/audio sig nals selected as the input. • T o cop y video/audio from a video device, connect the video device to the A V 5–6 jacks or VIDEO A UX (VIDEO/A UDIO) jacks of the unit.
PREPARATIONS ➤ Selecting an on-screen menu language En 30 Select the desired on-screen menu language from English (default), Japanese, French, German, S panish, Russian, Italian and Chinese. 1 Press RECEIVER z to turn o n the unit. 2 T urn on the TV and switch the TV inpu t to display video fr om the unit (HDMI OUT jack).
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 31 The Y amaha Parametric r oom Acoustic Optimizer (YP AO) function detects speaker connections, measures the distances from th.
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 32 • T o cancel the operation, disconnect the YP AO microphone, or use the cursor keys to select “Exit” and press ENTER, bef ore star ting the measurement. • Do not stand between the speakers and the YP A O microphone dur ing the measurement process (about 3 minutes).
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 33 Error messages If any error message is displayed during the meas urement, resolve the problem and perform Y P AO ag ain. TV screen Front display ■ Proc edure to handle errors 1 Check the content of error message and press ENTER.
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 34 W arning messages If a warnin g message is displayed after the measurement, you can still save the measurement r esults by following on-screen inst ructions. However , we r ecommend you perfor m YP AO again in or der to use the unit with the optimal speake r settings.
PLAYBACK ➤ Basic playback procedure En 35 PLA Y BA CK 1 T u rn on the external devices (suc h as a TV or BD/D VD player) connected to the unit. 2 Use the input selection keys to select an input sour ce . 3 Start playback on the external de vice or select a radio station.
PLAYBACK ➤ Selecting the input source and favori te settings with one touch (SCENE) En 36 The SCENE function allows you to select th e assigned input source, sound program, Compressed Music Enhancer on/off, and target zones (RX-V575 only) with just one touch.
PLAYBACK ➤ Selecting the sound mode En 37 The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). ❑ Selecting a sound program suitable for movies • Pre ss M OVI E rep eate dl y .
PLAYBACK ➤ Selecting the sound mode En 38 Enjoying sound field eff ects (CINEMA DSP) The unit is equipped with a variet y of sound programs that utilize Y amaha’ s original DSP technology (CINEMA DSP). It allows you to eas ily create sound fields like actual movie theaters or concer t halls in your room.
PLAYBACK ➤ Selecting the sound mode En 39 ■ Sound pro gr a ms suitable for music/stereo playback (MUSIC) The following sound programs are opti mized for listening to music sources.
PLAYBACK ➤ Selecting the sound mode En 40 ■ Enjoying stereoscopic sound fields (CINEMA DSP 3D) CINEMA DSP 3D creates a natural stereoscopic sound field in your room. CINEMA DSP 3D functions when both of the following condition s are met. • O ne of the sound programs (except 2ch Stereo and 7ch/5ch Stereo) is selected (p.
PLAYBACK ➤ Selecting the sound mode En 41 ■ Playing back 2-channel sources in multichannel (surround dec oder) The surround decoder enables unprocessed multichannel playback from 2-channel sources. When a multichannel source is input, it works the same way as the straight decode mode.
PLAYBACK ➤ Selecting the sound mode En 42 Enjoying c ompressed music with enhanc ed sound (Compr essed Music Enhancer) Compressed Music Enhancer adds depth and breadth to the sound, allowing you to enjoy a dy namic sound close to the original sound before it was compressed.
PLAYBACK ➤ Listening to FM/AM radio En 43 Y ou can tune into a radio station by specifying its frequency or selecting from register e d radio stations. • The radio frequencies differ depending on the country or region where the unit is being used.
PLAYBACK ➤ Listening to FM/AM radio En 44 Registering fav orite radio stations (presets) Y ou can r egiste r up to 40 radio st ations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers.
PLAYBACK ➤ Listening to FM/AM radio En 45 ■ Selec ting a preset station T une into a r egistered radio station by selecting its preset number . 1 Press FM or AM to select “TUNER” as the input sour ce . 2 Press PRESET repeatedl y to select the desired radio station.
PLAYBACK ➤ Listening to FM/AM radio En 46 Radio Da ta Sy stem tuning (U.K. and Europe models only) Radio Data System is a data transmission system used by FM stations in many countries.
PLAYBACK ➤ Playing back iPod music En 47 Y ou can play back iPod music on the unit using a USB cable supplied with the iPod. • An iP od may not be detected by the unit or some features may not be compatib le, depending on the model or software version of the iP od.
PLAYBACK ➤ Playing back iPod music En 48 Playback of iP od con tent Follow the procedure below to operate the iPod contents and start playback. Y ou can contr ol the iPod with the menu displayed on the TV screen. • Operations with TV screen are availab le only when your TV is connected to the unit via HDMI.
PLAYBACK ➤ Playing back iPod music En 49 ■ Playback screen 1 Status indicators Display the current r epeat/shuffle se ttings (p.50) and playback status (such as play/pause). 2 Playback inf ormation Displays the artist name, album name, song title, and elapsed time/song length.
PLAYBACK ➤ Playing back iPod music En 50 ■ Repeat/shuffle settings Y ou can configure the r epeat/shuffle settings of your iPod. • During simple play , configure the repeat/shuffle settings directly on your iP od or press MODE to display the TV menu screen and then f ollow the procedure below .
PLAYBACK ➤ Playing back music stored on a USB storage device En 51 Y ou can play back music files stor ed on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. The unit supports USB mass storage class de vices (F A T 16 or F A T32 format).
PLAYBACK ➤ Playing back music stored on a USB storage device En 52 2 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla yback starts and the playbac k screen is displa yed. • T o return to the previous screen, press RETURN.
PLAYBACK ➤ Playing back music stored on a USB storage device En 53 ■ Playback screen 1 Status indicators Display the current r epeat/shuffle se ttings (p.53) and playback status (such as play/pause). 2 Playback inf ormation Displays the artist name, album name, song title, and elapsed time.
PLAYBACK ➤ Playing back music stored on media servers (P Cs/NAS) En 54 Y ou can play back music files stor ed on your PC or DLNA-compatible NAS on the unit. • T o use this function, the unit and your PC must be connected to the same router (p.28).
PLAYBACK ➤ Playing back music stored on media servers (P Cs/NAS) En 55 3 Use the cursor keys to select an item and press ENTER. If a song is selecte d, pla yback starts and the playbac k screen is displa yed. • T o return to the previous screen, press RETURN.
PLAYBACK ➤ Playing back music stored on media servers (P Cs/NAS) En 56 ■ Playback screen 1 Status indicators Display the current r epeat/shuffle se ttings (p.56) and playback status (such as play/pause). 2 Playback inf ormation Displays the artist name, album name, song title, and elapsed time.
PLAYBACK ➤ Listening to Internet rad io En 57 Y ou can listen to Internet radio stations from all over the world. Y ou can contr ol the Internet radio with the menu displayed on the TV screen. • Operations with TV screen are availab le only when your TV is connected to the unit via HDMI.
PLAYBACK ➤ Listening to Internet rad io En 58 ■ Brow se screen 1 List name 2 Contents list Displays the list of Internet radio cont ent. Use the cur sor keys to select an item and pr ess ENTER to co nfirm the selection.
PLAYBACK ➤ Playing back iTunes/iPod mu sic via a network (AirPlay) En 59 The AirPlay function allows you to play back iT unes/iPod music on the unit via network. • T o use this function, the unit and y our PC or iP od must be connected to the same router (p.
PLAYBACK ➤ Playing back iTunes/iPod mu sic via a network (AirPlay) En 60 • Y ou can tur n on the unit automatically when star ting playbac k on iT unes or iP od by setting “Network Standby” (p.
PLAYBACK ➤ Playing back music in mult iple rooms (RX-V575 only) En 61 The Zone A/B function allows you to play back an input so ur ce in the room where the unit is installed (Zone A) and in another room (Zone B).
PLAYBACK ➤ Playing back music in mult iple rooms (RX-V575 only) En 62 ■ Basic playback pr ocedure 1 Press ZONE A or ZONE B to enable/disable audio output to Zone A or Zone B. “SP A” lights up in the fr ont displa y when the Zone A output is enab led and “SP B” lights up when t he Zone B ou tput is enabled .
PLAYBACK ➤ Viewing the current status En 63 Sw itching informa tion on the fron t disp lay 1 Press INFO. Each time y ou press the key , the displa yed item changes . About 3 seconds later , the correspondi ng information fo r the displa yed item appears .
PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Op tion menu) En 64 Y ou can configure separate playback settin gs for different playback sour ces. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback.
PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Op tion menu) En 65 ■ T on e Co ntr ol (T on e Co nt ro l) Adjusts the high-frequency range (T r eble) and lo w-fr eq uency range (Bass) of sounds. Choices T reble (T reble), Bass (Bass) Setting range -6.
PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Op tion menu) En 66 • Some early Dolby Digital EX or DTS-ES sources do not contain a flag for reproducing surround back channel. We recommend you set “Extended Surround” to “ b PLIIx Movie” or “EX/ES” when pla ying back those sources.
PLAYBACK ➤ Configuring playback settings for di fferent playback sources (Op tion menu) En 67 ■ Audio In (A udio In) Combines the video jack of the selected in put sour ce (HDMI 1–5 or A V 1–2) with an audio jack of others. For example, use this function in the following cases.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 68 C ONFIGURA TIONS Y ou can configure the unit’ s various function with the menu displayed on the TV screen. • Operations with TV screen are av aila b le only when your TV is connected to the unit via HDMI.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 69 Setu p me nu item s Menu Item Function Pag e Speaker Configuration Pow e r A mp A ss ig n (RX-V575 only) Selects a speaker system. 71 Subwoofer Selects whether or not a subwoofer is connected.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 70 Sound DSP Par ameter CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 75 Panorama Enables/ disables the broadening ef fect of the front sound field. 75 Center Width Adjusts the bro adening ef fect of th e center sound fie ld.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 71 Speaker Configures the speaker settings manually . ■ Configur ation Configures the output characteristics of the speakers.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 72 ❑ Surround Selects whether or not surround speakers are connected and their sizes. Settings ❑ Surround Back (RX-V575 only) Selects whether or not surround back speakers are connected and their sizes.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 73 ■ Distance Sets the distance between each speaker and list ening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance fr om “Met er” o r “Fee t”.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 74 HDMI Configures the HDMI settings. ■ Configur ation ❑ HDMI Con trol Enables/disables HDMI Control (p.100). Settings • T o use HDMI control, y ou need to perform the HDMI Control link setup (p.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 75 ❑ Standby Sync Select whether to use HDMI control to link the standby behavior of the TV and the unit when “HDMI Control” is set to “On”. Settings ❑ ARC Enables/disables ARC (p.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 76 ❑ Cen te r Wid th Adjusts the broadening effect of the center sound field. Higher to enhance the broadening effect, and lower to reduce it (closer to center). This setting is effective when “ b PLII Music” or “ b PLIIx Music” (RX-V575 only) is selected.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 77 ■ V olume Configures the volume settings. ❑ Dyna mic Ra nge Selects the dynamic range adjustment method for bit str eam audio (Dolby Digital and DTS signals) playback. Settings ❑ Max V ol ume Sets the maximum volume to prevent excessive loudness.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 78 ■ EC O Mode Enables/disables the eco (power saving) mode. When the eco mode is enabled , you can r educe the unit’ s power consumption. Settings • Be sure to press ENTER to restart the unit after selecting a setting.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 79 4 T o change another input source name, repeat st eps 1 to 3. 5 T o exit from the menu, press SETUP. ■ Dimmer Adjusts the brightness of the front display . Setting range -4 to 0 (higher to brighten) Default 0 • The front display ma y become dar k when “ECO Mode” (p .
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 80 Network Configures the network settings. ■ Informa tion Displays the network information on the unit. ■ IP Addr ess Configures the network parameters (such as IP address). ❑ DHCP Select whether to use a DHCP server .
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 81 ■ MA C Address F i lt er Sets the MAC address filter to limit access to the unit from other network devices.
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 82 ■ Network Update Updates the fir mware via the network. ❑ Per fo rm Up da te Starts the pr ocess to update the unit’ s firmware. For details, see “Updating the unit’ s firmware” (p.
CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED SETUP menu) En 83 Configure the system settings of the unit while viewing the front display . 1 Set the unit to standby mode. 2 While holding down STRAIGHT on the front panel, press z (power).
CONFIGURATIONS ➤ Configuring the system sett ings (ADVANCED SETUP menu) En 84 Changing the FM/AM tuning frequenc y setting (TU) (Asia and General models only) Change the FM/AM tuning frequency setting of the unit depending on your c ountry or region.
CONFIGURATIONS ➤ Controlling external devices with the remote control En 85 Y ou can use the unit’ s r emote control to operate externa l devices (such as BD/DVD players) if you have registered the remote contr ol code of the external d evice. • Y ou cannot control an e xter nal de vice that does n ot ha ve a remote control sensor .
CONFIGURATIONS ➤ Controlling external devices with the remote control En 86 Registering the remote con trol codes fo r playback devic es Y ou can use the unit’ s r emote cont r ol to operate p layback devices if you have registered their r emote control codes.
CONFIGURATIONS ➤ Controlling external devices with the remote control En 87 Resetting remote control c odes Y ou can r e set a r e mote contr ol cod e r egiste r ed to each input selection key . 1 Press CODE SET using a pointe d object such as the tip of a ballpoint pe n.
CONFIGURATIONS ➤ Updating the unit’s firmware via the network En 88 New firmware that provides a dditional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it.
APPENDIX ➤ Frequently asked questions En 89 APPENDIX The new spea ker sy stem does not provide an ideal sound balance ... If you have changed sp eakers or have a ne w speaker system, use YP AO to optimize the speaker settings again (p.31). If you want to ad just the speaker settings manually , use “Speaker” in the “Setup” menu (p.
APPENDIX ➤ Troubleshooting En 90 Refer to the table below when the unit doe s not function properly . If the problem you are experiencing is not listed below or if the instructions below do not help, tur n off the unit, disconnect the power cable, and contact the nearest authorized Y amaha dealer or service center .
APPENDIX ➤ Troubleshooting En 91 The unit cannot be controlled using the remote control. The unit is out of the operating range. Use the r emote contr ol within the operating range (p. 4). The batteries are weak. Replace with new batteries. The unit’ s remote contr ol sensor is exposed to direct sunlight or strong l ighting.
APPENDIX ➤ Troubleshooting En 92 Aud io Proble m Cause Rem ed y No sound. Another input sour ce is selected. Select an appropriate inpu t source with the input select ion keys. Signals that the unit cannot r e pr oduce are being input. Some digital audio formats cannot be played back on the unit.
APPENDIX ➤ Troubleshooting En 93 No sound from the playback de vice (connected to the unit with HDMI). The TV does not support HDCP (High-bandwidth Digital Content Protection). Ref er to the instruction manual s for the TV and check the TV’ s specifications.
APPENDIX ➤ Troubleshooting En 94 Vi de o FM/AM r adio Proble m Cause Rem ed y No video. Another input sour ce is selected on the unit. Select an appropriate inpu t source with the input selection keys. Another input sour ce is selected on the TV . Switch the TV input t o display the video fr om the unit.
APPENDIX ➤ Troubleshooting En 95 USB and netw ork Proble m Cause Rem ed y The unit does not detect the USB device. The USB device is not connected to the USB jack secure ly . T urn of f the unit, reconnect your USB device, and turn the unit on aga in.
APPENDIX ➤ Error indications on the front display En 96 Error indications on the front displa y Message Cause Remedy Access denied Access to the PC is deni ed. Configure the sharing se ttings and select t he unit as a device to which music contents ar e shared (p.
APPENDIX ➤ Glossary En 97 Aud io i nfor mati on ■ Audio dec o ding f o rma t Dolb y Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories , Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD disc s.
APPENDIX ➤ Glossary En 98 Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of inform ation when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
APPENDIX ➤ Glossary En 99 Ya m a h a t e c h n o l o g i e s CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects.
APPENDIX ➤ Information on HDMI En 100 Vi de o s i gn a l f l ow Video signals input from a video device to the unit are output to a TV as shown below .
APPENDIX ➤ Information on HDMI En 101 (Example) T o use HDMI C ontr ol, you need to perform the follow ing HDMI Control link setup after connecting the TV and playback devices. • This setup is required ev er y time you add a new HDMI Control-compatible de vice to your system.
APPENDIX ➤ Information on HDMI En 102 HDMI signal c ompatibility Au dio sign als Video signals The unit is compatible with the video signals of the following r esolutions: • When CPPM copy-protected D VD-A udio is play ed back, video/audio signals may not be output, depending on the type of the D VD player .
APPENDIX ➤ Reference diagram (rear panel) En 103 • The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.
APPENDIX ➤ Trademarks En 104 Manufactured under license from Dolby Laboratories. Dolby , Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. (For RX-V475) Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,92 9; 7,392,195; 7,272,567 & other U.
APPENDIX ➤ Specifications En 105 Input jacks • Analog Audio Audio x 4 (A V 5–6, AUDIO, V -AUX [Mini Jack]) • Digital Audio (Suppor ted fr equencies: 32 kHz to 96 kHz) Optical x 2 (A V 1, A V 4.
APPENDIX ➤ Specifications En 106 Compatible Decoding Formats • Decoding Format - Dolby T rueHD, Dolby Digital Plus - Dolby Digital EX - Dolby Digital - DTS-HD Master Audio, DTS-HD High Re solution Audio, DTS Express - DTS, DTS 96/24, DTS-ES Matrix 6.
APPENDIX ➤ Specifications En 107 Vid e o S ec t ion • Video Signal T ype [U.S.A., Canada, Korea a nd General models] ................ NTSC [Other mode ls]................ ..................... ..................... .......... P AL • Video Signal Level Composite .
APPENDIX ➤ Index En 108 Symbols ★ / ★★ keys 10 Envelope icon ( p ) 88 Lock icon ( o ) 79 Numerics 2.1-channel system 14 2ch Stereo (sound program) 39 3.1-channel system 14 4.1-channel system 13 4K signal (video signal resolution) 102 5.1-channel system 13 , 15 5ch Stereo (sound program) 39 6.
APPENDIX ➤ Index En 109 Dolby Pro Logic IIx Movie (Extended Surround) 65 Dolby Pro Logic IIx Movie (surround decoder) 41 Dolby Pro Logic IIx Music (Extended Surround) 65 Dolby Pro Logic IIx Music (s.
APPENDIX ➤ Index En 110 MOVIE (sound program category) 38 Multiple room playback 61 MUSIC (sound program category) 39 Music Video (sound program) 39 MUTE key 10 Muting 35 N NAS (Network Attached Sto.
APPENDIX ➤ Index En 111 Standby Through (HDMI, Setup menu) 74 Station preset (FM/AM radio) 44 Status (Information, Setup menu) 80 Stereo mini jack 17 Stereo mini-plug cable 17 Stereo pin cable (RCA .
© 2013 Yamaha Corporation YF213A0/EN.
An important point after buying a device Yamaha RX-V575BL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha RX-V575BL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha RX-V575BL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha RX-V575BL you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha RX-V575BL will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha RX-V575BL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha RX-V575BL.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha RX-V575BL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha RX-V575BL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
