Instruction/ maintenance manual of the product M7CL-48 Yamaha
Go to page of 16
M7CL StageMix User Guide Welcome: Thank you for downloading the “M7CL St ageMix” iPad app for the Yamaha M7CL V3 digital mixing console. Via a wireless acce ss point, StageMix can control any variant of M7CL console so long as it is running V3 firmware.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 2 CONTENTS P a g e 1.0 System Requirements 3 2.0 WiFi Settings 3 3.0 Getting Started 4 3.1 M7CL Network Setup 4 3.2 iPad Settings 4 3.3 StageMix Setup 5 3.3.1 Offline Demo Mode 6 3.3.2 Configure StageMix to Work with an M7CL 6 3.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 3 1.0 System Requirements • Apple iPad (any model) • Yamaha M7CL digital mixing console with V3 firmware (any model, including M7CL-48, M7CL-32, M7CL-48ES) • WiFi access point (preferably with 802.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 4 3.0 Getting Started 3.1 M7CL Network Setup I. Connect the WiFi access point to the M7 CL’s network port via a CAT5 cable. Note that a cross-over cable will be needed with older a ccess points that don’t have the “auto MDIX” function.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 5 d. Select [Static]. e. Write an IP Address similar to the one for the M7CL, but with just the last number different. (For example, if M7CL is 192.168.0.128, give an address to the iPad su ch as 192.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 6 3.3.1 Offline Demo If [Offline Demo] is pressed in the “Sel ect Mixer” screen, all the functions of “StageMix” will operate independently of any mi xing console. It is a useful way to demonstrate and learn how to use the app without the need for a mixer.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 7 3.3.3 Select a Mixer and Begin Working If your iPad has been configured to work with an M7CL console, select the mixer from the list and press [CONNECT]. The message “Syncing With M7CL…” will appear while StageMix is obtaining parameters from t he console.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 8 4.0 StageMix Operation 4.1 Mixer Window The main page of the StageMix is called the “Mixer” window. It shows the EQ curve, CUE and ON buttons, fader and level meters, and channel names for eight adjacent channels.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 9 4.1.2 Faders Each fader has its channel number disp layed on its cap. The fader cap must be touched to allow the level to be adjusted. The fader will not “jump” or “ramp” to a new position on the slider.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 10 4.2 SETUP Press the [SETUP] button below the YAMAHA logo to open a new window which allows user prefer ences to be selected. Press [Done] in the top-right corner to return to the Mixer window. 4.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 11 Press the [LONG FADERS] button in the bo ttom-left corner again to return to the Mixer Overview. 4.4 SENDS ON FADERS Press the [SENDS ON FADERS] button in the left column of the Mixer Overview to access sends to Mix and Matrix busses.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 12 4.4.1 Mix Sends ON In SENDS ON FADERS mode, the [ON ] button in each channel strip is used to turn On/Off the Mix Send fr om each channel to the currently selected target Mix/Matrix bus.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 13 The current channel’s Name, Fader, Level Meters, [ON] and [CUE] buttons are shown in the left column. At t he bottom-left, there are “previous” and “next” arrow buttons for navi gating to different channels.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 14 4.5.1 HPF When the HPF is selected, an extra [HPF] button appears at the top of the EQ graph. Press this button to switch the HPF on/off. When the button is green, the HPF is On. HPF has no Gain or Q parameter: only frequency.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 15 5.0 Troubleshooting 5.1 No WiFi Available If this message appears after launching St ageMix, this indicates that the iPad is not connected to a WiFi access point or that WiFi may be switched off in the iPad.
Yamaha Commercial Audio M7 CL StageMix User Guide Page 16 5.3 Connection Lost If StageMix loses its connection to the M7CL, the following message will appear. Operation of StageM ix is not possible while this message box is onscreen. StageMix wil l automatically attempt to reconnect to the M7CL.
An important point after buying a device Yamaha M7CL-48 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha M7CL-48 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha M7CL-48 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha M7CL-48 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha M7CL-48 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha M7CL-48, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha M7CL-48.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha M7CL-48. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha M7CL-48 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
