Instruction/ maintenance manual of the product HTR-5440RDS Yamaha
Go to page of 57
Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANAD A MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUR OP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
CA UTION CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT . 1 T o assure the finest performance, please read this manual carefully . Keep it in a saf e place for future reference.
1 1 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION INTRODUCTION CONTENTS INTRODUCTION FEA TURES .......................................................... 2 GETTING ST ARTED ........................................
2 Manufactured under license from Dolby Laboratories. “ Dolby ” , “ AC-3 ” , “ Pro Logic ” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished W orks. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
3 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION GETTING ST AR TED Checking the Package Contents Check that the following items are included in your package. Remote control Batteries (AA, R06, UM-3 type) AM loop antenna Indoor FM antenna 75-ohm/300-ohm antenna adapter (U.
4 SURROUND DIGITAL SILENT VIDEO AUX PHONES VIDEO L AUDIO R 6CH INPUT INPUT MODE INPUT VOLUME RDS MODE/FREQ EON PTY SEEK MODE START TUNING MODE PRESET /TUNING FM/AM MEMORY EDIT BASS BALANCE SPEAKERS PR.
5 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION q B ASS Turn this control clockwise to increase or counterclockwise to decrease the low-frequency response. w TREBLE Turn this control clockwise to increase or counterclockwise to decrease the high-frequency response.
6 Remote Control ■ Controlling this unit 1 PO WER Each time you press this button, the unit switches between the power on and standby mode. 2 TIME/LEVEL Press this button to select the item in the TIME/LEVEL mode. 3 – /+ These buttons adjust the settings of the SET MENU and TIME/LEVEL mode.
7 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION Using the Remote Control ■ Contr olling a Y AMAHA tape dec k or CD pla yer Identify the remote control buttons with your component ’ s buttons. If these buttons are identical, their functions will be the same.
8 Display ENHANCED PS PTY RT CT MEMORY SLEEP PCM DSP DIGITAL PRO LOGIC A SP B VIRTUAL DOLBY DTS DIGITAL PRO LOGIC DISCO 5CH STEREO MONO TV SPORTS MOVIE THEATER 1 2 ENTERTAINMENT GAME CONCERT HALL JAZZ CLUB PTY HOLD NEWSINFO ROCK CONCERT BASS EXT.
9 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION Rear Panel 1 DIGIT AL INPUT jacks 2 6CH INPUT jacks See pages 12 and 13 for connection information. 3 Antenna input terminals See page 26 for connection information.
10 SPEAKER SETUP Speakers to Be Used This unit is designed to provide the best sound-field quality with a 5-speaker system, using main speakers, rear speakers and a center speaker .
11 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION CONNECTIONS Before Connecting Components CA UTION Never connect this unit and other components to mains power until all connections between components have been completed.
12 ■ Connecting an MD recor der , CD recor der or tape deck Connect the analog input/output jack of your recording component to the AUDIO jacks. Note • When you connect a recording component to this unit, keep its power on while using this unit. If the power is off, this unit may distort the sound from other components.
13 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION VIDEO MONITOR OUT DVD DVD DVD D-TV/CBL D-TV/CBL D-TV/CBL IN VCR 1 OUT VIDEO SIGNAL AUDIO SIGNAL IN VCR 1 OUT OUT(REC) IN(PLA Y) CD AUX MD/CD-R OPTICAL COAXIAL AM ANT GND FM ANT 75 UNBAL.
14 Connecting Video Components ■ A udio signal jacks Be sure to connect the right channel (R), left channel (L), input (IN) and output (OUT) properly .
15 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION VIDEO MONITOR OUT DVD DVD DVD D-TV/CBL D-TV/CBL D-TV/CBL IN VCR 1 OUT VIDEO SIGNAL AUDIO SIGNAL SUB WOOFER OUTPUT IN VCR 1 OUT OUT(REC) IN(PLAY) CD AUX MD/CD-R OPTICAL COAXIAL AM ANT GND FM ANT 75 UNBAL.
16 Connecting Speakers Be sure to connect the right channel (R), left channel (L), “ + ” (red) and “–” (black) properly . If the connections are faulty , no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
17 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION ■ Subw oofer connection When using a subwoofer with built-in amplifier , including the Y AMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack.
18 IMPEDANCE SELECTOR Switch W ARNING Do not change the IMPEDANCE SELECTOR switch setting while the power to this unit is on, otherwise the unit may be damaged. If this unit fails to turn on when ST ANDBY/ON (or POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid either position.
19 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION ADJUSTING THE SPEAKER BALANCE Using the T est T one The adjustment of each speaker sound output level should be performed at your listening position with the remote control.
20 3 Adjust B ALANCE on the fr ont panel so that the sound output level of the right main speaker and the left main speaker is the same. 4 Press – /+ repeatedly to adjust the output level of the speaker currently outputting the test tone so that it becomes almost the same as that of the main speakers.
21 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION PLA YING A SOURCE SILENT PHONES VIDEO L AUDIO R 6CH INPUT INPUT MODE INPUT VOLUME RDS MODE/FREQ EON PTY SEEK MODE.
22 5 Play the sour ce . Refer to the instructions for the source component (and “ TUNING ” for details). 6 Adjust the v olume to the desired output level. If desired, adjust BASS, TREBLE, BALANCE, etc. These controls are only effective for the sound from the main speakers.
23 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION ■ Notes on playing a sour ce encoded with a DTS signal • If the digital output data of the player has been processed in any way , you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player .
24 Selecting a DSP Program Y ou can enhance your listening experience by selecting a DSP program. Refer to “ SOUND FIELD PROGRAM ” for details about each program. y • Make sure that the sound effect is turned on (see page 25). Press PROGRAM l or h (or DSP PRG+ or PRG – ) repeatedly to select the desired program.
25 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION ■ Virtual CINEMA DSP and SILENT CINEMA Virtual CINEMA DSP V irtual CINEMA DSP allows you to enjoy the sound field effects of the DSP program without rear speakers.
26 TUNING Connecting the Antennas Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. Indoor FM antenna (included) AM ANT GND FM ANT 75 UNBAL.
27 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION TUNING Automatic T uning Automatic tuning is effective when station signals are strong and there is no interference. 1 Use INPUT l / h to select TUNER as the input source.
28 TUNING Automatic Preset T uning (for RDS stations only) Y ou can make use of the automatic preset tuning function for RDS stations only . This function enables the unit to automatically tune in with strong signals and to sequentially store up to 40 RDS stations (5 groups x 8 stations).
29 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION TUNING Manual Preset T uning Y ou can also store up to 40 stations (5 groups x 8 stations) manually . 1 T une in to the desired station. Refer to “ Automatic/Manual Tuning ” for the tuning procedure.
30 TUNING Exchanging Preset Stations Y ou can exchange the assignment of two preset stations with each other . Example: Exchange preset station “ E1 ” with “ A5 ” 1 Recall preset station “ E1 ” . Refer to the procedure in the section “ T o Recall a Preset Station ” on page 29.
31 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION RECEIVING RDS ST A TIONS Radio Data System (RDS) is a data transmission system by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal.
32 PTY SEEK Function If you select the desired program type, the unit automatically searches all preset RDS stations that are broadcasting a program of the required type. 1 Press PTY SEEK MODE to set the unit in the PTY SEEK mode. The program type of the station being received or “ NEWS ” flashes on the display .
33 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION EON Function This function uses the EON data service on the RDS station network.
34 RECORDING A SOURCE SILENT PHONES VIDEO L AUDIO R 6CH INPUT INPUT MODE INPUT VOLUME RDS MODE/FREQ EON PTY SEEK MODE START TUNING MODE PRESET /TUNING FM/AM MEMORY EDIT BASS BALANCE SPEAKERS PROGRAM P.
35 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION SET MENU The SET MENU consists of 9 items including the speaker mode setting. Use the SET MENU to enjoy the optimum audio/video playback for your system. y • Y ou can adjust the items on the SET MENU while playing a source.
36 ■ CENTER SP (center speaker mode) By adding a center speaker to your speaker configuration, the unit can provide good dialog localization for many listeners and superior synchronization of sound and images. Choices: LRG (large), SML (small), NON (none) Initial setting: LRG LRG Select this if you have a large center speaker .
37 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION ■ REAR LR SP (rear speaker mode) Choices: LRG (large), SML (small), NON (none) Initial setting: LRG LRG Select this if you have large left and right rear speakers or if a rear subwoofer is connected to the rear speakers.
38 3 I/O ASSIGN It is possible to assign jacks according to the component to be used if this unit ’ s DIGIT AL INPUT jack settings (component names for jacks) differ from that component. This makes it possible to change the jack assignment and effectively connect more component.
39 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION SET MENU dB L C C R RL RR Center speaker image ms 6 DTS SET (DTS LFE level) This setting is effective only when this unit decodes DTS signals. Use this feature to adjust the output level of the LFE (low- frequency effect) channel when playing back a DTS signal.
40 DELA Y TIME AND SPEAKER OUTPUT LEVELS When using the digital sound field processor with the Dolby Pro Logic decoder , Dolby Digital decoder or DTS decoder , you can adjust the delay time between the main sound and sound effect, and each speaker ’ s output level as you wish.
41 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION DELA Y TIME AND SPEAKER OUTPUT LEVELS 2 1 Adjusting Method Adjustments should be performed with the remote control while watching the information on the display . 1 Press TIME/LEVEL repeatedly to select the item you want to adjust.
42 SLEEP TIMER The SLEEP timer can be used to automatically set this unit in the standby mode. This timer is useful when you are going to sleep while enjoying a broadcast or other desired input source. The SLEEP timer can only be set with the remote control.
43 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION 2 JAZZ CLUB — SOUND FIELD PROGRAM A digital sound field processor (DSP) based on the latest Y AMAHA technology is built into this unit. It is possible to play back various sound fields for the source you are listening to.
44 8 MO VIE THEA TER 2 ADVENTURE 70 mm ADVENTURE This program is ideal for precisely reproducing the sound design of the newest 70-mm and multichannel soundtrack films. The sound field is made to be similar to that of the newest movie theaters, so the reverberations of the sound field itself are restrained as much as possible.
45 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION SOUND FIELD PROGRAM Presence DSP sound field Surround DSP sound field ■ MO VIE THEA TER 1 and 2 Most commercial.
46 TROUBLESHOOTING Refer to the chart below when the unit does not function properly . If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit in the standby mode, disconnect the power cord and contact the nearest authorized Y AMAHA dealer or service center .
47 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION Problem Cause Remedy Refer to page TROUBLESHOO TING No sound from the eff ect speakers.
48 TROUBLESHOO TING 12 12 – 15 The volume le vel cannot be increased, or the sound is distorted. The component connected to the REC OUT jacks of this unit is turned off. T urn on the power to the component. The effect and surround sounds cannot be recorded.
49 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION TROUBLESHOO TING FM AM 27 26 27 26 28 26 ■ T uner Prob lem FM stereo reception is noisy . The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor .
50 SPECIFICA TIONS A UDIO SECTION • Minimum RMS Output Power for Main, Center , Rear 20 Hz to 20 kHz, 0.06% THD, 8 ohms ...................................... 65 W • Maximum Power 1 kHz, 0.7% THD, 8 ohms ...........................................
51 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION GLOSSAR Y ■ Dolb y Surr ound Dolby Surround uses a four analog channel recording system to reproduce realistic .
52 ■ PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time.
53 English B ASIC OPERA TION AD V ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION INDEX A AC outlets ...................................................................................... 18 Antennas ..............................................
Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA PARK, CALIF . 90620, U.S.A. Y AMAHA CANAD A MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUR OP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
* SPEAKERS MAIN + — R L A — + B CENTER REAR (SURROUND) R L + — S VIDEO VIDEO MONITOR OUT DVD DVD DVD D-TV/CBL D-TV/CBL D-TV/CBL IN VCR 1 OUT VIDEO SIGNAL AUDIO SIGNAL SUB WOOFER OUTPUT IN VCR 1 OUT OUT(REC) IN(PLA Y) CD AUX MD/CD-R MD/CD-R MD/CD-R DIGIT AL OUTPUT OPTICAL OPTICAL COAXIAL AM ANT GND FM ANT 75 UNBAL.
An important point after buying a device Yamaha HTR-5440RDS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha HTR-5440RDS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha HTR-5440RDS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha HTR-5440RDS you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha HTR-5440RDS will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha HTR-5440RDS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha HTR-5440RDS.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha HTR-5440RDS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha HTR-5440RDS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
