Instruction/ maintenance manual of the product EM5014C Yamaha
Go to page of 37
POWERED MIXER POWERED MIXER Owner’s Manual Owner’s Manual EN Making the Most of Your Mixer Pages 12 to 18 Quick Guide Pages 7 to 11.
2 EMX5014C Owner’s Manual The abov e warning is located on the rear of the unit. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intende.
EMX5014C Owner’s Manual 3 (5)-4 PRECAUTIONS PLEASE READ CAREFULL Y BEFORE PROCEEDING * Please keep this man ual in a saf e place for future ref erence. W ARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
4 EMX5014C Owner’s Manual Always turn the power off when the device is not in use. The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualifi ed Y amaha ser vice personnel about replacing defective components.
EMX5014C Owner’s Manual 5 Thank you for your purchase of this Y amaha EMX5014C po wered mix er . Please read through this man- ual carefully before beginning use, so that you will be able to tak e full adv antage of your mixer’ s super- lati ve features and enjo y trouble-free operation for years to come.
6 EMX5014C Owner’s Manual Features Input Channels ................................................................................................ page 19 The EMX off ers eight monaural mic/line inp.
EMX5014C Owner’s Manual 7 Mixer Basics Quic k Guide We begin by connecting up tw o speakers and generating some stereo output. Note that opera- tions and procedures will v ar y somewhat accor ding to the input devices y ou are using. 1 Connect up the speakers and y our input devices (microphones, instruments, etc.
8 EMX5014C Owner’s Manual Quick Guide Mixer Basics 2 T urn the Channel faders and the ST Master fader all the way do wn. 3 Set the PO WER AMP switch to its upper position (to L-R).
Quick Guide Mixer Basics EMX5014C Owner’s Manual 9 6 T urn on the power . First turn on the power to all connected de vices other than powered speakers and amp , and then tur n on the EMX itself. If using powered speakers or amps , turn these on last.
10 EMX5014C Owner’s Manual Quick Guide Mixer Basics Y ou can use the reverb eff ect to simulate the sound of a concert hall or jazz club. 1 T urn the PROGRAM dial to select the desired effect type. To select a rev erb eff ect, turn the dial to any value from 1 to 7.
Quick Guide Mixer Basics EMX5014C Owner’s Manual 11 The compressor evens out the input le vel, reducing the level of loud passages and bringing up softer passages. The result is a cleaner sound where nuances remain audible and the l yrics are easier to hear .
12 EMX5014C Owner’s Manual Mixer Basics Making the Most of Y our Mixer An Intr oduction A Place f or Everything and Ever ything in its Place A Plethora of Connectors—What Goes Where? Questions you.
Making the Most of Your Mixer EMX5014C Owner’s Manual 13 Mixer Basics Balanced, Unbalanced—What’ s the Difference? In a word: “noise.” The whole point of balanced lines is noise rejection, and it’s something they’re very good at.
14 EMX5014C Owner’s Manual Making the Most of Your Mixer Mixer Basics A balanced cable has three conductor s: 1) A ground conductor which carries no signal, just the “ground” or “0” reference against which the signal in the other conductors fluctuates.
Making the Most of Your Mixer EMX5014C Owner’s Manual 15 Mixer Basics Making Better Mixes Appr oaching the Mix—Where Do Y ou Start? Mixing is easy, right? Just move the faders around until it soun.
16 EMX5014C Owner’s Manual Making the Most of Your Mixer Mixer Basics To EQ or Not to EQ In general: less is better. There are many situations in which you’ll need to cut certain frequency ranges, but use boost sparingly, and with caution.
Making the Most of Your Mixer EMX5014C Owner’s Manual 17 Mixer Basics Ambience Your mixes can be further refined by adding ambience effects such as reverb or delay.
18 EMX5014C Owner’s Manual Making the Most of Your Mixer Mixer Basics Compression Have you ever wondered why professionally produced recordings sound so different from your own? There are numerous reasons, of course, but one important factor is the judicious use of compression.
EMX5014C Owner’s Manual 19 Reference Fr ont & Rear P anels Contr ols on Eac h Channel 1 INPUT A and INPUT B jacks (Channels 1 to 6) Y ou can connect an input source to either jack. Be sure to set the [26 dB] switch 4 to match the type of de vice you are connecting.
20 EMX5014C Owner’s Manual Front & Rear Panels Reference 3 INSERT I/O Jac k (Channels 1 to 6) Each of these jacks is positioned between the equalizer and fader of the corresponding input channel (1 to 6). Y ou can use these jacks to connect channels to de vices such as graphic equalizers, compressors, and noise fil- ters.
Front & Rear Panels EMX5014C Owner’s Manual 21 Reference 8 FCL (Feedback Channel Locating) lamp (Channels 1 to 9/10) This lamp is used during setup to identify any channel that might be ho wling. Check these lamps when setting up for a performance.
22 EMX5014C Owner’s Manual Front & Rear Panels Reference Digital Effects Section I SEND Jack • EFF This unbalanced phone output jack outputs the signal from the EFFECT bus. Y ou use this jack, for example, to connect to an external ef fector .
Front & Rear Panels EMX5014C Owner’s Manual 23 Reference M EFFECT ON Switch/Indicator Switches use of the internal ef fect on or off. The inter - nal ef fect is applied only if this switch is turned on. T o set the switch on, press it in so that it lights up.
24 EMX5014C Owner’s Manual Front & Rear Panels Reference Master Section P REC OUT Jacks These RCA pin-type unbalanced output jacks can be used to send the main stereo signal to an external D A T recorder or cassette recorder . The jacks output the ste- reo signal pre adjustment by the ST master fader g and graphic equalizer V .
Front & Rear Panels EMX5014C Owner’s Manual 25 Reference Y Maximum Output Switc h This selector lets you set the maximum output from for the 2-channel internal amp to any of three le v els. Set this to match the size of your room or the input capac- ity of your speakers.
26 EMX5014C Owner’s Manual Front & Rear Panels Reference d PFL (Pre-Fader Listen) Switc h Set this switch on if you want to monitor the pre-fade of the signal that is being output at the ST OUT or ST SUB OUT jacks.
Front & Rear Panels EMX5014C Owner’s Manual 27 Reference Rear P anel h SPEAKERS jacks Use these jacks to connect to speakers. Note that the output directed to these jacks v aries according to the setting of the PO WER AMP switch Y . A1, B1: NEUTRIK NL4 Speakon outputs.
28 EMX5014C Owner’s Manual Reference Speaker Connections When making 2-channel and 2-channel parallel connections to the SPEAKERS jacks, be sure that the impedance of your speakers meets the conditions indicated below. Note that actual speaker impedance varies according to the connection method and the number of speakers.
EMX5014C Owner’s Manual 29 Reference Rac k Mounting Rac k Mounting To prepare the unit for rack mounting, use the (separately sold) RK5014 rack mount kit. If rack-mounting the unit, be sure to maintain adequate ventilation so the unit does not o verheat.
30 EMX5014C Owner’s Manual Reference Setup T op panel Rear P anel EMX Installation V ents are located on the front and rear of the EMX unit. Position the unit so that the vents are not blocked by nearby walls or objects. DI DOWN UP OCTAVE SCENE SF1 SF 2 SF 3 SF 4 SF 5 F 1 F 2 F 3 F 4 F 5 F 6 INFORMATION COMMON ELEMENT/PERF.
EMX5014C Owner’s Manual 31 Reference Tr oub leshooting ■ Po wer doesn’t come on. ❑ Be sure that you are using the supplied power cord, and that it is correctly connected to the AC IN connector and plugged into a working power out- let. ■ Po wer suddenl y went off.
EMX5014C Owner’s Manual 32 Reference Specifications ■ General Specifications Output impedance of signal generator: 150 ohms * These specifications apply to rated power supplies of 120V, 230V and 240V . MIN TYP MAX UNIT Maximum Output P ower (SPEAKERS) (RL=4 ohms) Both ch drive, 1kHz, THD+N 0.
33 EMX5014C Owner’s Manual Specifications Reference ■ Input Characteristics *1 0 dBu is referenced to 0.775 Vr ms. *2 Input sensitivity: the lowest le v el that will produce an output of +4 dBu(1.23 V), or the nominal output level when the unit is set to maxi- mum le vel.
Specifications EMX5014C Owner’s Manual 34 Reference Dimensional Diagrams 485 8 493 145 6 155 Unit: mm 444 (440 excluding screw heads).
35 EMX5014C Owner’s Manual Specifications Reference Bloc k Diagram and Le vel Diagram CH INPUT CH1-6 A B HA BA PA D [-60dBu~-16dBu] [-60dBu~-16dBu] [-34dBu~+10dBu] [-34dBu~ +10dBu] GAIN [-34dBu~+10d.
For details of products, please contact your nearest Y amaha representativ e or the authorized distrib utor listed below . Pour plus de détails sur les produits, v euillez-vous adresser à Y amaha ou au distributeur le plus proche de v ous figurant dans la liste suiv ante.
U .R.G., Pro Audio & Digital Musical Instrument Division, Y amaha Cor poration © 2005 Y amaha Corporation WG13770 702CRAPx.x-04C0 Printed in China Y amaha Pr o A udio global web site http://www .yamahaproaudio .com/ Y amaha Manual Library http://www .
An important point after buying a device Yamaha EM5014C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha EM5014C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha EM5014C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha EM5014C you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha EM5014C will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha EM5014C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha EM5014C.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha EM5014C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha EM5014C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
