Instruction/ maintenance manual of the product CX-2 Yamaha
Go to page of 19
CX-1 CX-2 OWNER’S MANUAL CONTENTS Safety Instructions ..................... 2 Features ................................... 3 Supplied Accessories ................ 3 Connections ............................. 4 Operations .............................
2 7 Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. 8 Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.
3 Caution: Read this bef ore operating your unit 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold.
4 CONNECTIONS ● Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made.
5 < CX-2 > * : Refer to “ ABOUT THE ACCESSORY COMPONENTS ON THE REAR PANEL ” on page 6. AC OUTLETS REMOTE CONTROL L R L L R R L R MC/MM PHONO POWER AMP GND TAPE 1 TAPE 2 LD IN CD TUNER PB REC OUT PB REC OUT PB REC OUT PB REC OUT 200W MAX. TOTAL SWITCHED I20V 60Hz I.
6 If your video cassette recorder, LD player, etc. and your monitor are equipped with “S” (high-resolution) video terminals, connect them to this unit’s S video terminals, and connect this unit’s S MON OUT terminal to the “S” video input of your monitor.
7 OPERA TIONS T O PLA Y A SOURCE 1 Set to the “ ∞ ” position. 2 3 Select a desired input source. * If you select turntable as an input source (PHONO position), you should confirm that the PHONO switch on the rear panel is set to the position corresponding to the type of cartridge being used by the turntable.
Notes ● If you want to enjoy another source while recording, select it with the INPUT selector. ● LOUDNESS (for CX-2 only), BASS , TREBLE , BALANCE , VOLUME controls and PURE DIRECT switch settings have no effect on the material being recorded. T O RECORD A SOURCE T O T APE (OR DUB FROM A T APE T O ANO THER) 1 Select the source to be recorded.
9 REC OUT selector setting on tape dubbing < CX-1 >< CX-2 > To dub from tape deck 1 to tape deck 2 or 3 (or both tape deck 2 and 3 at the same time) To dub from tape deck 2 to tape deck 1 .
10 When y ou listen with headphones When listening with headphones privately, connect the headphones to the PHONES jack. Sounds from the speakers are cut off.
11 REMO TE CONTROL TRANSMITTER NO TES ABOUT THE REMO TE CONTR OL TRANSMITTER Battery installation < CX-1 > < CX-2 > (Australia, U.K. and Europe models) < CX-2 > (U.S.A., Canada and General models) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak.
12 < CX-1 > < CX-2 > (A ustralia, U .K. and Europe Models) < CX-2 > (U .S.A., Canada and General models) * When you operate this unit and/or other YAMAHA components with this remote control transmitter, set the YPC-USER-LEARN switch to the YPC (Yamaha Preset Code) position.
13 For Other Component Contr ol Identify the remote control transmitter keys with your component’s keys. If these keys are identical, their function will be the same. On each key function, refer to the corresponding instruction on your component’s manual.
14 REMO TE CONTR OL “LEARNING” FUNCTION (U .S.A., Canada and General models of CX-2 only) The keys on this remote control transmitter can be programmed to “learn” key-functions from other remote control transmitters without losing the preset key functions.
15 1 Set to the “ LEARN ” position. 2 Press a key on this unit where a new function will be learned. 3 Press and hold the key (on the other remote control transmitter) where the desired new function is. * When the TRANSMIT/LEARN indicator stops illuminating, the learning is finished.
16 1 Set to the “ USER ” position. 2 Press and hold the CLEAR button using the point of a mechanical pencil, etc. 3 Press and hold the key where the learned function to be deleted is until the indicator flashes 3 times. To clear two or more functions, repeat step 2 and 3.
17 Power Supply [U.S.A. and Canada models] ............................................AC 120V, 60 Hz [Australia and U.K. models] ............................................AC 240V, 50 Hz [Europe model] ....................AC 230V, 50 Hz [General model] .
18 SYMPTOM The unit fails to turn on when the POWER switch is pressed. No sound or no picture. Only one side speaker outputs the sound. Sound “hums”. Sound level is low. The sound from the MC cartridge is too low Using the BASS, TREBLE, BALANCE and LOUDNESS (for CX-2 only) controls does not affect the tone.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-2084 RELLINGEN BEI HAMBURG, F.
An important point after buying a device Yamaha CX-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha CX-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha CX-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha CX-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha CX-2 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha CX-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha CX-2.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha CX-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha CX-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
