Instruction/ maintenance manual of the product CRW2216E-NB Yamaha
Go to page of 25
User Guide Guide de l’utilisateur Bedienungsanleitung CR W2216E SERIES ON / DISC READ / WRITE English Français Deutsch.
COMPLIANCE INFORMA TION ST A TEMENT (DECLARA TION OF CONFORMITY PROCEDURE) Responsible P ar ty: Y amaha Systems T echnology , Inc. Address: 100 Centur y Center Cour t San Jose, Calif ornia 95112 T ele.
T his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. ANSI Class : Class 1 Material : GaAlAs Wavelength : 783-789 nm Emission Duration : Continuous Laser Output Power : Less than 44.
WARNING i W ARNING ❢ W ARNING ❢ • The temperature where CR W2216E is located should be between 5ºC and 40ºC (41ºF – 104ºF), when used in a fan-cooled system. • Do not disassemble the CR W2216E cov er to reduce the risk of electric shock.
Important Precautions ii Impor tant Precautions Please read the follo wing precautions before attempting to operate the CR W2216E. • Before recording a disc, be sure to clean the disc and tray using an air aerosol-type dust remov er . A dust particle on the disc may cause recording to fail, producing an unusable disc.
Table of Contents iii Table of Contents Introduction ............................................................................... 1 CRW2216E Features ....................................................... 1 Orange Book Compatible Recording .......
Introduction 1 Intr oduction Thank you for purchasing a Y amaha CR W2216E driv e. Please read this manual before using the driv e in order to mak e the best use of the superior CR W2216E functions. After reading, please retain this manual for future reference.
Introduction 2 Orange Book Compatible Recording T rack at Once In this mode, data can be recorded to disc one track at a time. Discs recorded in this mode cannot be played in CD players or CD- R OM driv es other than a CD-R W or a CD-R driv e until the session is closed.
Chapter 1 - System Configuration 3 Chapter 1 - System Configuration Before using the CR W2216E, make sure that you have all of the items on the list of included items.
Chapter 1 - System Configuration 4 T ools Phillips screwdriver This is used to remov e the cov er of your computer, and to install the Y amaha CR W2216E driv e. Long nose pliers These are used to insert or remov e the jumper pin when setting the MASTER/SLA VE settings of the Y amaha CR W2216E driv e.
Chapter 2 - Installing the Yamaha CRW2216E Drive 5 Chapter 2 - Installing the Y amaha CR W2216E Drive MASTER/SLA VE settings Before you install the CR W2216E in your computer, you must make the MASTER/SLA VE setting. This setting is set by inserting a jumper pin in the jumper switch located on the rear panel of the CR W2216E drive.
Chapter 2 - Installing the Yamaha CRW2216E Drive 6 Setting the CR W2216E as the MASTER As shown in the diagram at the right, insert the jumper pin into the right edge of the jumper switch. Note: If only the CRW2216E will be connected to the IDE interface connector , connect the CRW2216E to the end of the connector .
Chapter 2 - Installing the Yamaha CRW2216E Drive 7 Installing the CR W2216E drive The following steps will dif fer slightly depending on the type of com- puter you are using. For details on remo ving the cover from your computer , and installing or removing internal de vices, refer to the manual for your computer .
Chapter 2 - Installing the Yamaha CRW2216E Drive 8 3. Y our hands or body may be holding a char ge of static elec- tricity . T ouch a metallic portion of the chassis or power suppl y to release any suc h charge. 4. Remove the fr ont cover of a v acant half-height drive bay .
Chapter 2 - Installing the Yamaha CRW2216E Drive 9 6. Connect the IDE interface connector . Connect the 40-pin IDE interface connector to the IDE interface located on the rear panel of the CR W2216E drive. Position the connector so that the colored line is at pin 1 (your lower right).
Chapter 2 - Installing the Yamaha CRW2216E Drive 10 A UDIO cable 8. Connect the power suppl y cable. Connect the +12V and +5V 4-pin power cable to the po wer supply interface located on the rear panel of the CR W2216E drive. The shape of the connector makes it impossible to re verse the connec- tions.
Chapter 2 - Installing the Yamaha CRW2216E Drive 11 9. Tighten the four fastening scre ws securely . 10. Attach the cover of y our computer . 11. Connect the power cable to an A C outlet, and switch on your computer . Make sure that the LED located on the panel of the CR W2216E drive is lit.
Chapter 3 - Operation 12 Chapter 3 - Operation Front P anel 1 Disc tray The disc is inserted and ejected here. Pressing the eject button will open the tray . 2 Headphone jack This stereo mini jack allows you to connect headphones and listen to audio. 3 Headphone v olume control This control adjusts the volume le vel of the headphone output.
Chapter 3 - Operation 13 6 Eject button This button is used to open or close the tray . 7 Manual Eject hole This is used to manually eject a disc that cannot be ejected in the nor- mal way . It is for emergenc y use only . Loading a Disc 1. Press the eject button to open the tra y .
Chapter 3 - Operation 14 Ejecting the Disc If the CR W2216E is powered on: Press the eject button to eject the disc. Note: Y ou cannot eject the disc if the AT API command prohibits the eject operation while the CRW2216E is r eading data. Caution: Be sur e to r emove the disc after it is completely ejected.
Chapter 3 - Operation 15 Manual Eject (emer gency use) Here we explain ho w to eject the disc when it cannot be ejected in the normal way; for example, the po wer is shut of f inadvertently or the loading mechanism fails. This technique should be used only as a last resort.
Troubleshooting 16 T r oubleshooting If CR W2216E is not performing as expected, look up the symptoms in the following table, and take the appropriate correcti ve action. Caution: Applying physical shock or vibration to the CRW2216E while a CD-R disc or CD-RW disc is being written may pr oduce writing errors.
Appendix 17 Appendix Specifications Specifications are subject to change without prior notice. Interface A T API (E-IDE) Data Capacity 650MB (74 minutes disc) 550MB (63 minutes disc) Record/Read Spe.
Appendix 18 Front P anel Indicator Key ● on: green flashing: green — off ❍ on: orange flashing: orange Status ON/DISC READ/WRITE Reset ❍ ➠ — ❍ ➠ — Ready (no disc) ❍ — Inserting.
English: If you hav e any questions, please contact your dealer or one of the following companies. French: Pour plus de détails sur les produits, veuillez v ous adresser à Y amaha ou au distributeur.
An important point after buying a device Yamaha CRW2216E-NB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha CRW2216E-NB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha CRW2216E-NB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha CRW2216E-NB you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha CRW2216E-NB will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha CRW2216E-NB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha CRW2216E-NB.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha CRW2216E-NB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha CRW2216E-NB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
