Instruction/ maintenance manual of the product AX-10 Yamaha
Go to page of 13
Natural Sound Stereo Integrated Amplifier Préampli/ampli de puissance stéréo de la série “Natural Sound” Natural Sound Stereo-V erstärker Natural Sound Integrerad Stereo Förstärkare Amplifi.
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC. Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE. Diese Geräte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG.
English 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold.
4 CONNECTIONS ● Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made.
English 5 Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed.
4 Select the speakers to be used. * If you use two speaker systems, press both the A and B switches. 5 Play the source. 6 Adjust to the desired output level. 7 If desired, adjust the BASS , TREBLE and BALANCE controls or turn on the PURE DIRECT switch.
English 4 Set the tape deck to be used for recording in the recording mode. 5 To monitor the sound to be recorded, select the tape deck being used for recording with the INPUT selector. 1 Select the source to be recorded. 2 Play the source. 3 Confirm the source by selecting it with the INPUT selector and turning up the VOLUME control.
8 Adjusting the B ASS and TREBLE controls Adjusting the B ALANCE contr ol Selecting the SPEAKER system Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions.
English 9 REMO TE CONTR OL TRANSMITTER The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player, tuner and tape deck connected to this unit are YAMAHA components, then this remote control transmitter will also control various functions of each component.
10 NO TES ABOUT THE REMO TE CONTR OL TRANSMITTER Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement.
English 11 SYMPTOM The unit fails to turn on when the POWER switch is pressed. No sound. The sound suddenly goes off. Only one side speaker outputs the sound. There is a lack of bass, and no ambience. Sound “hums”. Using the BASS, TREBLE and BALANCE controls does not affect the tone.
12 SPECIFICA TIONS Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.03% THD ...................70W+70W 6 ohms, 20 Hz to 20 kHz, 0.06% THD ...................80W+80W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-2084 RELLINGEN BEI HAMBURG, F.
An important point after buying a device Yamaha AX-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha AX-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha AX-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha AX-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha AX-10 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha AX-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha AX-10.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha AX-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha AX-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
