Instruction/ maintenance manual of the product 502 Yamaha
Go to page of 24
Natural Sound Compact Disc Player Lecteur de disque audionumérique de la série “Natural Sound” Thank you f or selecting this Y AMAHA Compact Disc Pla yer . Nous v ous remercions d’a voir por té v otre choix sur ce lecteur de disque audionumérique Y AMAHA.
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.
3 English 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold.
4 FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
DIGITAL IN CD OPTICAL OPTICAL DIGITAL AUDIO OUT LINE OUT LINE OUT 5 English When the LINE OUT (analog) terminals of this unit are used ( ➊ ) ● Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component.
6 POWER 12345 SKIP/SEARCH +1 0 1 2 3 4 5 6 7 8 9 0 PROG FILE / SAVE PLAYXCHANGE OPEN/CLOSE OUTPUT LEVEL PHONES DISC NATURAL SOUND COMPACT DISC PLAYER PEAK / AUTO DISPLAY OFF –+ IDENTIFICA TION OF COMPONENTS FR ONT P ANEL * ( ) indicates the page number on which the control and its function are best described.
7 English * ( ) indicates the page number on which the control button is best described. REMO TE CONTROL TRANSMITTER CLEAR button (p. 15) OPEN/CLOSE button (p. 8) PROG button (p. 14) Numeric buttons (p. 10) DISC SKIP button (p. 8) SYNCHRO button (p. 17) SKIP button (p.
1 Turn the power on. 2 Open the disc tray and load discs. 3 Close the disc tray 4 Select a desired disc play mode (1DISC or 5DISC) confirming it on the display. “1DISC” mode: The unit will play a designated disc only. “5DISC” mode: The unit will play all discs on the tray in sequence.
T o stop pla y temporarily To resume play, press the PAUSE button again (or press the PLAY button). * The (PLAY/PAUSE) button on the front panel can also be used to stop play temporarily or to resume play.
DIRECT PLA Y Select a desired track by using the numeric buttons. Example: To select track 25 Press ➀ twice, then immediately press ➁ once. * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.
11 English When the DISC SCAN button is pressed when this unit is stopped, this unit will play an initial part of each disc in turn. Each disc is played for 8 seconds. If, during this play, you find a disc that you want to listen to, press the DISC SCAN button once again or press the PLAY button to cancel this function.
12 OUTPUT LEVEL –+ PHONES OUTPUT LEVEL –+ or (On the front panel) Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the DIMMER button. Normal illumination Slightly dim Dim DIMMER CDC-902 only Adjusting the level of signals output into an amplifier , etc.
13 English 1 Load one or more discs. 2 Close the disc tray. 3 Select a desired disc play mode (1DISC or 5DISC). * If you select “1DISC” mode, next select a desired disc by using the DISC SKIP button on the remote control transmitter or a DISC -select button on the front panel.
1 Stop the unit. 2 If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP button in turn. * Without this operation, the total time of the programmed tracks will not be displayed during programming.
15 English T o stop program play Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. T o cancel a programmed sequence There are several methods, as described below.
16 1 Select a track which has index numbers. 2 3 Select the desired index number. T o cancel the index searc h function Press the INDEX button. Notes ● Not all discs have index numbers.
17 English 1 Select a disc. 2 Load a tape on the tape deck. * CDC-902 only The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 3 This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.
18 1 Stop the unit. 2 Select the disc. 3 The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 4 Enter the tape’s total possible recording time (tape length). You can select any of four tape lengths by pressing the TAPE button.
19 English 1 Stop the unit. 2 If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP button in turn. * This unit will read the contents of a disc by this operation.
20 ■ Random sequential tape pr ogramming The unit will automatically program tracks on a disc in random sequential order for recording to tape. Notes ● Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly.
21 English 1 Stop the unit. 2 Select the “1DISC” disc play mode. 3 Select the disc. 4 The peak level search is performed on the disc. Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this repeat play.
22 NO TES ABOUT THE REMO TE CONTROL TRANSMITTER NO TES ABOUT HANDLING COMP A CT DISCS ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs.
23 English AUDIO SECTION Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB Harmonic distortion+noise (1 kHz) < CDC-902 > .................................................. 0.003% or less < CDC-502 > ..................
YAMAHA ELECTRONICS CORPORATION, US A 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD . 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H . SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.
An important point after buying a device Yamaha 502 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha 502 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha 502 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha 502 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha 502 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha 502, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha 502.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha 502. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha 502 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
